ADP150AUJZ-1.8 - ANALOG DEVICES

Push Pull CATV Amplifier

50 - 1000 MHz

Rev. V1

MAAM-009455

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Features

 20 dB Gain

 8 V DC Bias

 Differential Inputs and Outputs

 Low Distortion

 Lead-Free 4 mm 20-Lead PQFN package

 Halogen-Free ―Green‖ Mold Compound

 RoHS* Compliant and 260°C Reflow Compatible

Description

The MAAM-009455 is a GaAs MMIC amplifier in a

lead-free 4 mm 20-lead PQFN package. The MMIC

design is configured as a pair of cascode MESFET

amplifiers for broadband performance. It is designed

for integration in a 75 Ω push-pull, low distortion,

amplifier circuit.

This device is ideally suited for use in CATV, FTTX,

DBS, and HDTV applications where low noise figure

and low distortion are required.

Pin No. Pin Name Description

1 FB1+ Feedback 1+

2 IN1+ Input 1+

3 N/C No Connection

4 IN1- Input 1-

5 FB1- Feedback 1-

6 OUT1- Output 1-

7 N/C No Connection

8 BIAS- DC Bias

9 N/C No Connection

10 IN2- Input 2-

11 FB2- Feedback 2-

12 OUT2- Output 2-

13 N/C No Connection

14 OUT2+ Output 2+

15 FB2+ Feedback 2+

16 IN2+ Input 2+

17 N/C No Connection

18 BIAS+ DC Bias

19 N/C No Connection

20 OUT1+ Output 1+

Paddle4 RF and DC Ground

Pin Configuration 3

Ordering Information 1,2

Part Number Package

MAAM-009455-000000 Bulk Packaging

MAAM-009455-TR1000 1000 Piece Reel

MAAM-009455-TR3000 3000 Piece Reel

MAAM-009455-001SMB Sample Test Board

3. It is recommended, but not absolutely compulsory, that all No

Connections (N/C) within the IC are connected to ground on

the printed circuit board.

4. The exposed pad centered on the package bottom must be

connected to RF and DC ground.

Functional Schematic

* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.

1. Reference Application Note M513 for reel size information.

2. All sample boards include 5 loose parts.

FB2+

FB2-

IN1-

FB1+

IN1+

N/C

FB1-

OUT2-

OUT2+

N/C

N/C N/COUT1+

N/C N/COUT1- BIAS- IN2-

BIAS+

IN2+

Push Pull CATV Amplifier

50 - 1000 MHz

Rev. V1

MAAM-009455

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Parameter Test Conditions Units Min. Typ. Max.

Gain — dB 19.5 20.5 23

Gain Flatness — dB — 0.5 —

Noise Figure — dB — 5.5 —

Reverse Isolation — dB — 36 —

Input Return Loss — dB — 22 —

Output Return Loss — dB — 15 —

Output IP2 Two tones at 500 & 506 MHz, +8 dBm output/tone dBm — 80 —

Output IP3 Two tones at 500 & 506 MHz, +8 dBm output/tone dBm 41 43 —

Composite Triple Beat, CTB 77 Channels, +39 dBm V / Channel at the output dBc — -70 —

Composite Second Order, CSO 77 Channels, +39 dBm V / Channel at the output dBc — -70 —

Cross modulation 77 Channels, +39 dBm V / Channel at the output dBc — -70 —

P1dB 500 MHz dBm — 26 —

IDD +8 Volts mA — 325 385

Electrical Specifications: TA = 25°C, Freq: 1000 MHz, VDD = +8 Volts, Z0 = 75 Ω,

Test Circuit with M/A-COM Technology Balun MABA-009210-CT1760

Parameter Units Ref Spec

Typical data Test Conditions

Adjacent channel up to 750 KHz from channel

block edge dBc

<-58

-65

-66

POUT = +60 dBmV, N=1

POUT = +56 dBmV, N=2

POUT = +52 dBmV, N=4

Adjacent channel

(750 kHz from channel block edge to 6 MHz

from channel block edge)

dBc

<-62

<-60

-67

-64

-63

POUT = +60 dBmV, N=1

POUT = +56 dBmV, N=2

POUT = +52 dBmV, N=4

Next-adjacent channel

(6 MHz from channel block edge to 18 MHz

from channel block edge)

dBc

<-65

<-64

<-63

-75

-70

-65

POUT = +60 dBmV, N=1

POUT = +56 dBmV, N=2

POUT = +52 dBmV, N=4

Third-adjacent channel

(12 MHz from channel block edge to 18 MHz

from channel block edge)

dBc

<-73

<-70

<-65

-76

-73

-68

POUT = +60 dBmV, N=1

POUT = +56 dBmV, N=2

POUT = +52 dBmV, N=4

In each of 2N contiguous 6 MHz channels or

in each of 3N contiguous 6 MHz channels

coinciding with 2nd harmonic and with 3rd

harmonic components respectively

(up to 1000 MHz)

dBc –63

–63

-70

-65

POUT = +60 dBmV, N=1, 2nd Harmonic

POUT = +60 dBmV, N=1, 3rd Harmonic

Electrical Specifications: Frequency: 500 MHz, 256 QAM

5. Reference Specification Data-Over-Cable Service Interface Specifications, DOCSIS. Downstream RF Interface Specification, DRFI.

Push Pull CATV Amplifier

50 - 1000 MHz

Rev. V1

MAAM-009455

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Absolute Maximum Ratings 6,7,8

Parameter Absolute Maximum

RF Input Power 6 dBm

Voltage 15.0 volts

Operating Temperature -40°C to +85°C

Junction Temperature9 +150°C

Storage Temperature -65°C to +150°C

6. Exceeding any one or combination of these limits may cause

permanent damage to this device.

7. M/A-COM Technology Solutions does not recommend

sustained operation near these survivability limits.

8. These operating conditions will ensure MTTF > 1 x 106 hours.

9. Junction Temperature (TJ) = TC + Өjc * (V * I)

Typical thermal resistance (Өjc) = 15° C/W.

a) For TC = 25°C,

TJ = 71°C @ 8 V, 385 mA

b) For TC = 85°C,

TJ = 130°C @ 8 V, 375 mA

Handling Procedures

Please observe the following precautions to avoid

damage:

Static Sensitivity

Gallium Arsenide Integrated Circuits are sensitive

to electrostatic discharge (ESD) and can be

damaged by static electricity. Proper ESD control

techniques should be used when handling these

devices.

An external protection circuit using an inexpensive

anti-parallel diode pair can be used to protect the

IC. Please reference application note AN3028 on

http://www.macomtech.com for further detail.

Land Pattern10

10. Vias to be plated solid copper.

Push Pull CATV Amplifier

50 - 1000 MHz

Rev. V1

MAAM-009455

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Application Schematic

Component Value Package

C1 - C12 0.01 µF 0402

C13 2.7 pF 0402

L1, L2 390 nH 0805

L3, L4 2 nH 0402

L5 5.6 nH 0402

R1 - R4 0 Ω 0402

T1, T2 1:1 Baluns

Parts List11

11. The 1:1 baluns, T1 &T2 are M/A-COM Technology Solutions

part number MABA-009210-CT1760

Recommended PCB

C11

RFIN

RFOUT

VDD

C13 C12

C10

Push Pull CATV Amplifier

50 - 1000 MHz

Rev. V1

MAAM-009455

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Gain to 3 GHz

Gain to 1 GHz

Typical Performance Curves Over Temperature

Output Return Loss

Input Return Loss

Noise Figure Reverse Isolation to 3 GHz

0.0 0.2 0.3 0.5 0.7 0.8 1.0

+25°C

-40°C

+85°C

Frequency (GHz)

-15

-10

-5

0.0 0.5 1.0 1.5 2.0 2.5 3.0

+25°C

-40°C

+85°C

Frequency (GHz)

-50

-40

-30

-20

-10

0.0 0.2 0.3 0.5 0.7 0.8 1.0

+25°C

-40°C

+85°C

Frequency (GHz)

-70

-60

-50

-40

-30

-20

0.0 0.5 1.0 1.5 2.0 2.5 3.0

+25°C

-40°C

+85°C

Frequency (GHz)

-50

-40

-30

-20

-10

0.0 0.2 0.3 0.5 0.7 0.8 1.0

+25°C

-40°C

+85°C

Frequency (GHz)

0.0 0.2 0.3 0.5 0.7 0.8 1.0

+25°C

-40°C

+85°C

Frequency (GHz)

Push Pull CATV Amplifier

50 - 1000 MHz

Rev. V1

MAAM-009455

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Lead Free 4 mm 20-lead PQFN†

† Reference Application Note S2083 for lead-free solder reflow recommendations.

Meets JEDEC moisture sensitivity level 1 requirements.

Plating is 100% matte tin over copper.

Push Pull CATV Amplifier

50 - 1000 MHz

Rev. V1

MAAM-009455

M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

Information in this document is provided in connection with M/A-COM Technology Solutions Inc ("MACOM")

products. These materials are provided by MACOM as a service to its customers and may be used for

informational purposes only. Except as provided in MACOM's Terms and Conditions of Sale for such products or

in any separate agreement related to this document, MACOM assumes no liability whatsoever. MACOM

assumes no responsibility for errors or omissions in these materials. MACOM may make changes to

specifications and product descriptions at any time, without notice. MACOM makes no commitment to update

the information and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future

changes to its specifications and product descriptions. No license, express or implied, by estoppels or otherwise,

to any intellectual property rights is granted by this document.

THESE MATERIALS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR

IMPLIED, RELATING TO SALE AND/OR USE OF MACOM PRODUCTS INCLUDING LIABILITY OR

WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, CONSEQUENTIAL OR

INCIDENTAL DAMAGES, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR

OTHER INTELLECTUAL PROPERTY RIGHT. MACOM FURTHER DOES NOT WARRANT THE ACCURACY

OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN

THESE MATERIALS. MACOM SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS,

WHICH MAY RESULT FROM THE USE OF THESE MATERIALS.

MACOM products are not intended for use in medical, lifesaving or life sustaining applications. MACOM

customers using or selling MACOM products for use in such applications do so at their own risk and agree to

fully indemnify MACOM for any damages resulting from such improper use or sale.