LEADED BUILT-IN CAPACITANCE CERAMIC RESONATOR AWCR-MD RoHS/RoHS II Compliant Pb in ceramic, exemption (7c-I) FEATURES: * Built-in capacitors save space & components * Low cost timing solution. * Small size, Light weight APPLICATIONS: * Microprocessor clocks. * Electric appliances. * Remote controls. Size Varies | | | | | | | | | | | | | | * Industrial controllers. * General timing. ELECTRICAL CHARACTERISTICS: Parameters Frequency Range Minimum 2.00 12.51 Typical Resonant Impedance (Ro) Standard Built-in Capacitance (C1=C2) Frequency Tolerance Frequency Stability Withstanding Voltage D.C. Voltage Rating Voltage A.C. Voltage Insulation Resistance Operation Temperature Storage Temperature Aging Rate (Fosc) ABRACON IS ISO9001:2008 CE RTIFIED 24 17.6 24 12 4 -0.5 -0.3 100 -25 -55 -0.3 30 22 30 15 5 Maximum 6.00 60.00 80 30 30 36 26.4 36 18 6 +0.5 +0.3 50 6 15 +85 +85 0.3 Units Notes MHz pF % % Vdc Vdc Vp-p. M C C % 2.00 MHz ~ 2.99 MHz 3.00 MHz ~ 6.00 MHz 12.51 MHz ~ 60.00 MHz 2.00 MHz ~ 6.00 MHz 12.51 MHz ~ 13.00 MHz 13.01 MHz ~ 20.00 MHz 20.01 MHz ~ 25.99 MHz 26.00 MHz ~ 60.00 MHz -25C to +85C DC , 1 min 10Vdc, 1min From initial value Revised: 05.07.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com | LEADED BUILT-IN CAPACITANCE CERAMIC RESONATOR AWCR-MD RoHS/RoHS II Compliant Pb in ceramic, exemption (7c-I) Size Varies | | | | | | | | | | | | | | TEST CONDITION AND TEST CIRCUIT: X: Ceramic Resonator 1. Input 2. Ground 3. Output Parts shall be measured under a condition (Temp.: 2015C, Humidity: 6520% R.H.) unless the standard condition (Temp: 252C, Humidity: 655% R.H.) is regulated to measure OPTIONS AND PART IDENTIFICATION AWCR Frequency Frequency in MHz MD - C Load Capacitance Contact ABRACON for Built-in Capacitance options if not standard Packaging Blank: Bulk A: AMMO package* *AMMO package lead length 13.5mm Packaging: Bulk: 500pcs/plastic bag AMMO: 2000pcs/box Note: upon opening the original packaging, it is recommended that the product be used within 1 year. If the product will not be used within 1 year, it is recommended that the product be re-sealed in airtight packaging according to MSL 1 requirements to maintain solderability. ABRACON IS ISO9001:2008 CE RTIFIED Revised: 05.07.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com | LEADED BUILT-IN CAPACITANCE CERAMIC RESONATOR AWCR-MD RoHS/RoHS II Compliant Pb in ceramic, exemption (7c-I) Size Varies | | | | | | | | | | | | | | | OUTLINE DRAWING Freq. Range: 1.79 ~ 6.00MHz (Low Profile) Bulk: AMMO: Freq. Range: 12.51 ~ 60.00MHz Bulk: AMMO: **: 12.51 ~13.00MHz, 12.0mm max 13.01 ~ 60.00MHz, 10.0mm max CAUTION (1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. (2) This component is not hermetically sealed. Do not clean or wash the component. (3) Reflow Soldering: Do not use strong acidity flux, such as flux with chlorine content of greater than 0.2wt% during Reflow Soldering. (4) Do not expose the component to open flame. (5) This specification applies to the functionality of the component as a single unit. (6) Storage Conditions: If the product is to be stored for a period greater than 1 year after the Delivery Date, it is recommended that customers confirm the solderability and characteristics for the product prior to use. (7) This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other highreliability , life dependant applications. ContactAbracon Corporation prior to using this product when in doubt. ATTENTION: Abracon Corporation's products are COTS - Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications. Abracon's products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from Abracon Corporation is required. Please contact Abracon Corporation for more information. ABRACON IS ISO9001:2008 CE RTIFIED Revised: 05.07.13 Visit www.abracon.com for Terms & Conditions of Sale 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com