• Microprocessor clocks. • Industrial controllers.
• Electric appliances.
• Remote controls.
• Built-in capacitors save space & components
• Low cost timing solution.
• Small size, Light weight
ELECTRICAL CHARACTERISTICS:
FEATURES: APPLICATIONS:
• General timing.
|||||||| | | | | | | |
AWCR-MD
LEADED BUILT-IN CAPACITANCE CERAMIC RESONATOR
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Visit www.abracon.com for Terms & Conditions of Sale
Size Varies
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
Parameters Minimum Typical Maximum Units Notes
Frequency Range 2.00 6.00 MHz
12.51 60.00
Resonant Impedance (Ro)
80
Ω
2.00 MHz ~ 2.99 MHz
30 3.00 MHz ~ 6.00 MHz
30 12.51 MHz ~ 60.00 MHz
Standard Built-in Capacitance
(C1=C2)
24 30 36
pF
2.00 MHz ~ 6.00 MHz
17.6
22
26.4
12.51 MHz ~ 13.00 MHz
24 30 36 13.01 MHz ~ 20.00 MHz
12 15 18 20.01 MHz ~ 25.99 MHz
4 5 6 26.00 MHz ~ 60.00 MHz
Frequency Tolerance -0.5 +0.5 %
Frequency Stability -0.3 +0.3 % -25ºC to +85ºC
Withstanding Voltage 50 Vdc DC , 1 min
Rating Voltage D.C. Voltage 6 Vdc
A.C. Voltage 15 Vp-p.
Insulation Resistance 100 MΩ 10Vdc, 1min
Operation Temperature -25 +85 ºC
Storage Temperature -55 +85 ºC
Aging Rate (Fosc) -0.3 0.3 % From initial value
Pb in ceramic, exemption (7c-I)
RoHS/RoHS II Compliant
Revised: 05.07.13
|||||||||| | | | | |
AWCR-MD
LEADED BUILT-IN CAPACITANCE CERAMIC RESONATOR
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Visit www.abracon.com for Terms & Conditions of Sale
Size Varies
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
AWCR - MD - C -
Frequency
Frequency in MHz
Load Capacitance
Contact ABRACON for
Built-in Capacitance
options if not standard
Packaging
Blank: Bulk
A: AMMO package*
*AMMO package
lead length 13.5mm
OPTIONS AND PART IDENTIFICATION
TEST CONDITION AND TEST CIRCUIT:
X: Ceramic Resonator
1. Input
2. Ground
3. Output
Parts shall be measured under a condition (Temp.: 20±15°C, Humidity: 65±20% R.H.) unless the standard condition
(Temp: 25±2°C, Humidity: 65±5% R.H.) is regulated to measure
Pb in ceramic, exemption (7c-I)
RoHS/RoHS II Compliant
Packaging:
Bulk: 500pcs/plastic bag
AMMO: 2000pcs/box
Note: upon opening the original packaging, it is recommended that the product be used within 1 year. If the prod-
uct will not be used within 1 year, it is recommended that the product be re-sealed in airtight packaging according
to MSL 1 requirements to maintain solderability.
Revised: 05.07.13
||||||||| | | | | | |
AWCR-MD
LEADED BUILT-IN CAPACITANCE CERAMIC RESONATOR
30332
Esperanza, Rancho Santa Margarita, California
92688
tel 949-546-8000 | fax 949-546-8001 | www.abracon.com
Revised: 05.07.13
Visit www.abracon.com for Terms & Conditions of Sale
Size Varies
ABRACON IS
CERTIFIED
ABRACON IS
ISO9001:2008
CERTIFIED
ATTENTION: Abracon Corporation’s products are COTS – Commercial-Off-The-Shelf products; suitable for Commercial, Industrial and, where designated, Automotive Applications.
Abracon’s products are not specifically designed for Military, Aviation, Aerospace, Life-dependant Medical applications or any application requiring high reliability where component
failure could result in loss of life and/or property. For applications requiring high reliability and/or presenting an extreme operating environment, written consent and authorization from
Abracon Corporation is required. Please contact Abracon Corporation for more information.
CAUTION
OUTLINE DRAWING
Freq. Range: 1.79 ~ 6.00MHz (Low Profile)
Bulk: AMMO:
Freq. Range: 12.51 ~ 60.00MHz
Bulk: AMMO:
Pb in ceramic, exemption (7c-I)
RoHS/RoHS II Compliant
**: 12.51 ~13.00MHz, 12.0mm max
13.01 ~ 60.00MHz, 10.0mm max
(1) Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as
this will cause damage to the component.
(2) This component is not hermetically sealed. Do not clean or wash the component.
(3) Reflow Soldering: Do not use strong acidity flux, such as flux with chlorine content of greater than 0.2wt% during Reflow Soldering.
(4) Do not expose the component to open flame.
(5) This specification applies to the functionality of the component as a single unit.
(6) Storage Conditions: If the product is to be stored for a period greater than 1 year after the Delivery Date, it is recommended that
customers confirm the solderability and characteristics for the product prior to use.
(7) This product is not recommended for use in the following applications: Automotive, Medical, Military, Safety, or any other high-
reliability life dependant applications. ContactAbracon Corporation prior to using this product when in doubt.,
