TIS75-124 - Traco Electronic AG

http://www.tracopower.com Page 1

Industrial Power Supplies

TIS Series 75 - 600 Watt

Features

Switch mode power supplies for

DIN-rail mounting

4 power ranges with 3, 6, 12 and 24 A

output current (24 VDC models)

Selectable 115/ 230 VAC input

Very low ripple and noise

EMI complies with EN50081-2 and

EN50082-2

Conducted EMI to EN55011 class B

For system operation available with

built-in functions:

RED: Redundancy module for N+1

systems with true current sharing.

SIG: Signal module with AC-Power-

fail, DC- OK Signal and

external ON/OFF control

UDS: DC-UPS module for uninter-

ruptable battery backed-up

power systems.

Worldwide Safety Approvals

Easy snap-on mounting on DIN-rails

or chassis mounting

2 Year Product Warranty

The switching power supplies of the TIS series have been particulary de-

signed for applications in industrial process control systems and machine

tools. Excellent specifications and high immunity against electrical distur-

bances guarantee reliable power for sensitive loads in rugged industrial

environments. With help of optional function modules specific requirements

for system applications can be met by a standard product. With the UDS

module the power supplies can be extended to a perfect DC-UPS with auto-

matic battery- backup. This function is very often required in applications

where a time delayed shutdown of a system is necessary. To monitor and

control the power supply a signal module can be installed. For parallel

operation with active power sharing a redundancy option is available. This

flexibility makes the TIS series power supplies a cost effective solution for

many industrial applications.

Models

Ordercode Input Voltage Output Power Output Voltage Output Current

(includes terminal plugs) max. nom. max.

TIS 75-112 115 / 230 VAC 12 VDC 6.0 A

TIS 75-124 selectable 75 W 24 VDC 3.0 A

TIS 75-148 48 VDC 1.5 A

TIS 150-124 115 / 230 VAC 150 W 24 VDC 6.0 A

TIS 150-148 selectable 48 VDC 3.0 A

TIS 300-124 115 / 230 VAC 24 VDC 12 A

TIS 300-148 selectable 300 W 48 VDC 6.0 A

TIS 300-172 72 VDC 4.2 A

TIS 500-124 230 VAC 500 W 24 VDC 20 A

TIS 600-124 24 VDC 24 A

TIS 600-128 115 / 230 VAC 600 W 28 VDC 22 A

TIS 600-148 selectable 48 VDC 12 A

TIS 600-172 72 VDC 8.5 A

TIS 300-124 DCI 300 - 800 VDC 300 W 24 VDC 12 A

http://www.tracopower.com Page 2

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

Industrial Power Supplies

TIS Series 75-600 Watt

Input Specifications

Input voltage range – TIS 75, TIS 150, TIS 300, TIS 600 93 – 132 VAC / 187 – 264 VAC

– TIS 500 187 – 264 VAC

– TIS 300 DCI 300 – 800 VDC

Input frequency 47 – 63 Hz

Input current at full load (typ.) 115 VAC 230 VAC

– TIS 75 1.7 A 0.9 A

– TIS 150 3.0 A 1.7 A

– TIS 300 5.4 A 3.3 A

– TIS 500 5.5 A

– TIS 600 10.5 A 6.4 A

Inrush current (< 2 ms) 115 VAC 230 VAC

– TIS 75 < 16.5 A < 33 A

– TIS 150 < 35 A < 70 A

– TIS 300 < 35 A < 70 A

– TIS 500 < 70 A

– TIS 600 < 70 A < 80 A

Output Specifications

Output voltage adj. range – 12 VDC models 12 – 14 VDC

– 24 VDC models 24 – 28 VDC

– 28 VDC models 28 – 32 VDC

– 48 VDC models 48 – 52 VDC (48 – 55 VDC on request))

– 72 VDC models 60 – 76 VDC

Regulation – Input variation ± 0.2 % max.

– Load variation (10–90%) – TIS 75, TIS 150 ± 1.0 % max.

– TIS 300, TIS 500, TIS 600 ± 0.3 % max.

(± 1.5 % in parallel operation)

Ripple and Noise (20MHz Bandwidth) < 50 mV pk-pk

Electronic short circuit protection current limitation at 110 % typ.

(constant current, automatic restart)

Over voltage protection, triggerpoint at 140 % typ. Vout nom.

Hold-up time 115 VAC 230 VAC

– TIS 75 ... TIS 300 min. 25 ms min. 30 ms

– TIS 500 min. 40 ms

– TIS 600 min. 15 ms min. 25 ms

http://www.tracopower.com Page 3

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

General Specifications

Temperature ranges – Operating (ambient temp.) – 25 °C…+70 °C max.

– Derating above 50 °C 2% /°C

– Storage (non operating) – 25 °C…+85 °C

Humidity (non condensing) 95 % rel H max.

Temperature coef ficient 0.02 % / °C

Switching frequency 80 kHz typ. (Pulswidth modulation)

Efficiency – TIS 75 ... TIS 300 85 % typ.

– TIS 500 90 % typ.

– TIS 600 88 % typ.

Isolation according to EN 60950, UL 1950, UL 508C

Reliability, calculated MTBF (MIL-HDBK-217 E) – TIS 75 /150 450000 h @ +25°C/ 420000 h @ +25°C

– TIS 300 /500 360000 h @ +25°C/ 340000 h @ +25°C

– TIS 600 300000 h @ +25°C

Safety standards IEC 60950, EN 60950 (SELV),

UL/cUL 1950, UL 508C

Safety approvals UL/cUL 1950 recognized, File E18138

UL/cUL 508C listed, File E210002

UL/cuL 1604 listed, File E213613

(Class I,Division

2, Groups A, B, C and D hazardous locations)

CB-Scheme

Electromagnetic compatibility (EMC), Emissions EN 50081-1 / EN 50081-2

– Conducted RI suppression on input EN 55011 class B, EN 55022 class B,

FCC part 15, level B

– Radiated RI suppression EN 55011 class A, EN 55022 class A,

FCC part 15, level A

Electromagnetic compatibility (EMC), Immunity EN 50082-2

– Electrostatic discharge (ESD) IEC / EN 61000-4-2 4 kV / 8 kV

– Radiated RF field immunity IEC / EN 61000-4-3 10 V / m

– Electrical fast transient / burst immunity IEC / EN 61000-4-4 2 kV

– Surge immunity IEC / EN 61000-4-5 2 kV / 4 kV

– Immunity to conducted RF disturbances IEC / EN 61000-4-6 10 V

– Power frequency field immunity IEC / EN 61000-4-8 30 A / m

Safety class Degree of Protection 1 (IEC 536)

Case protection IP 20 (IEC 529)

Environment – Vibration IEC 60068-2-6,1 gn, 200 sweeps, each axis

– Shock IEC 60068-2-27, 15 gn, 11 ms, each axis

Enclosure material Aluminium (chassis) / stainless steel (cover)

Mounting (snap-on with selflocking spring) for 35 mm DIN-rails as per EN 50022

Connection Plugable screw terminals (plugs included)

(TIS 600: screw terminal blocks)

Industrial Power Supplies

TIS Series 75-600 Watt

http://www.tracopower.com Page 4

Specifications can be changed without notice

Optional Mounting Systems Dimensions mm (inches)Power Supplies with Redundancy Function

With this option a parallel operation of up to 5 units is possible. Decoupling diodes and current share lines allow to build

true N +1 redundant systems with active current sharing for all units. This function also includes an alarm relay to signal

a single unit failure.

This option is available for TIS 150 W, TIS 300 W and TIS 600 W models. Please note: A combination with other

options is not possible.

Models

Ordercode Input Voltage Output Po wer Output Voltage Ou tput Cu rrent

(includes terminal plugs) max. nom. max.

TIS 150-124 RED 115 / 230 VAC 150 W 24 VDC 6.0 A

TIS 150-148 RED selectable 18 VDC 12 A

TIS 300-124 RED 115 / 230 VAC 300 W 24 VDC 12 A

TIS 300-148 RED selectable 48 VDC 6.0 A

TIS 600-124 RED 115 / 230 VAC 600 W 24 VDC 24 A

TIS 600-148 RED selectable 48 VDC 12 A

Industrial Power Supplies

TIS Series 75-600 Watt

Specifications

Raiting per relay contact 60 VDC /0.36 A max.

I-Sense

Regulator

Con1

Pin3

115/230VAC

Con1

Pin1

Con1

Pin2

Common

Unit

Unit OK

Con3 - Pin1

Bus

Indicator

Con2 - Pin1/2

Con2 - Pin3/4

V-Sense

+Vout

Current

Share-

line

Unit OK

Con3 - Pin4

Con3 - Pin3

Con3 - Pin2

-Vout

24/48VDC

http://www.tracopower.com Page 5

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

Power Supplies with Powerfail Functions

These models provide 3 functions required in many process control system applications:

• AC-Powerfail signal (relay contact)

• DC-OK signal (relay contact)

• Remote ON/OFF

Models

Ordercode Input Voltage Output Po wer Output Voltage Ou tput Cu rrent

(includes terminal plugs) max. nom. max.

TIS 150-124 SIG 115 / 230 VAC 150 W 24 VDC 6.0 A

TIS 150-148 SIG selectable 48 VDC 3.0 A

TIS 300-124 SIG 115 / 230 VAC 300 W 24 VDC 12 A

TIS 300-148 SIG selectable 48 VDC 6.0 A

TIS 600-124 SIG 115 / 230 VAC 600 W 24 VDC 24 A

TIS 600-148 SIG selectable 48 VDC 12 A

Industrial Power Supplies

TIS Series 75-600 Watt

Specifications

DC-OK signal trigger point – Models with 24 Vout > 22.8 VDC ± 0.5 V relay B closed (pin 4 – pin 3)

– Models with 48 Vout > 45.6 VDC ± 1.0 V relay B closed (pin 4 – pin 3)

AC-Power fail signal Vin < 93 resp. < 187 VAC relay A closed (pin 7 – pin 6)

Raiting per relay contact 60 VDC /0.36 A max.

Remote

ON/OFF

115/230VAC

Con1

Pin1

NCon1

Pin2

Con1

Pin3 AC

Mains

Fail

Detection

Mains OK

Remote

ON/OFF

+Vout

Con2 - Pin3/4

-Vout

24/48VDC

Common

AC-Powerfail

Con3 - Pin2

Con3 - Pin7

Con3 - Pin6

Con2 - Pin1/2

Output

DC-OK

Detection

DC-OK

Common

DC-OK

Con3 - Pin5

Con3 - Pin4

Con3 - Pin3

Con3 - Pin1

(Relay A)

(Relay B)

http://www.tracopower.com Page 6

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

DC-UPS-System

In addition to the standard power supply function, these

models include a professional battery management system

to charge and monitor an external batter y. In case of a

power failure the battery is switched automatically and

without any interruption to the DC-output. If mains power

is available again, the battery is switched off. The hold-up

time is limited only by battery capacity and load. Charge

current and voltage can be adjusted to values as required

by battery type. Power fail and low battery alarm signals

Models

Ordercode Input Voltage Output Po wer Output Voltage Ou tput Cu rrent

(includes terminal plugs) max. nom. max.

TIS 300-124 UDS 115 / 230 VAC 300 W 24 VDC 12 A

selectable

TIS 600-124 UDS 115 / 230 VAC 600 W 24 VDC 24 A

selectable

Industrial Power Supplies

TIS Series 75-600 Watt

are available via two independent relay contacts. During

normal operation the battery status is monitored by

periodically loading the battery for short time. If a cell

resistance is high, there is a relay alarm available. The

battery is fully protected under any operational conditions.

The power supply is short circuit protected even in battery-

backup operation, however for safety reason the batter y

should be fused with a fast blow fuse. Batter y mode can

be activated by connection of Pin 7 and 8.

Complete external battery modules (3.2 Ah or 7 Ah standard) with lead batteries are available on request.

http://www.tracopower.com Page 7

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

DC-UPS-System

Industrial Power Supplies

TIS Series 75-600 Watt

Specifications

Charging current (factor y set) – TIS 300-124 UDS 1.2 A

– TIS 600-124 UDS 2.4 A

Adjustment range of charging current – TIS 300-124 UDS 0.15...1.5 A

– TIS 600-124 UDS 0.25...2.5 A

Holding current for charging batter y atvoltage 27.3 VDC < 50 mA

Overload at short circuit during battery operation system switches of f

AC-Powerfail signal Vin < 93 resp. < 187 VAC relay A closed (pin 2 – pin 3)

Low battery signal Battery voltage below 22 V relay B closed (pin 5 – pin 6)

Raiting per relay contact 60 VDC /0.36 A max.

During battery charge operation output current reduction by 1.4 x battery charge current

Battery

ON/OFF

Con4

Pin7

115/230VAC

Con1

Pin1

Con4

Pin8

NCon1

Pin2

Battery -

Battery +

Con1

Pin3

Con3 - Pin1

Con3 - Pin2

Mains

Fail

Detection

Battery

Test

Battery OK

Battery Low / failure

Common

Low Battery

Con4 - Pin4

AC-Powerfail

Con4 - Pin6

Con4 - Pin5

Battery Switch

Logic

Battery Charger

+Vout

Con2 - Pin3/4

-Vout

24VDC

Common

AC-Power OK

AC-Powerfail

Con4 - Pin3

Con4 - Pin2

Con4 - Pin1

Con2 - Pin1/2

Output

VBat>18V

Bat ON/OFF

Mains Fail

(Relay B)

(Relay A)

http://www.tracopower.com Page 8

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

Battery-Pack for DC-UPS Systems

The Battery Pack contains high quality, maintenance free lead-acid batteries with 3.2 Ah resp. 7.0 Ah capacity. The

batteries are fixed together with a re-settable electronic fuse on a solid mounting frame. Together with power supply

models TIS 300-124 UDS or TIS 600-124 UDS the battery pack provides a complete and reliable DC-UPS system.

Backup time is depending on load current and batter y capacity.

Models

Ordercode Battery Voltage Battery Capacity Permissable Charge

(25°C, 20h-rate) Current max.

TIS 24-32 AP 24 VDC 3.2 Ah 1.2 A

TIS 24-70 AP 24 VDC 7.0 Ah 2.4 A

Industrial Power Supplies

TIS Series 75-600 Watt

Specifications

Max. charge voltage 27...27.6 VDC

Temperature coefficient – 36mV /°C

Temperature range – at charge operation – 15 °C...+50 °C

– at load operation – 20 °C...+60 °C

– Storage – 20 °C...+60 °C

Average lifetime on standby operation at tA =20 °C 4...5 years

Cable length 1.0 m

Cable diameter – TIS 24-32 AP 2.5 mm2 (AWG 12)

– TIS 24-70 AP 4.0 mm2 (AWG 11)

Weight – TIS 24-32 AP 4.6 kg (10.1 lb)

– TIS 24-70 AP 5.9 kg (13.0 lb)

Recommended combinations – TIS 24-32 AP TIS 300-124 UDS

(power supplies) – TIS 24-70 AP TIS 600-124 UDS

http://www.tracopower.com Page 9

Specifications can be changed without notice

Optional Mounting Systems Dimensions mm (inches)

Weight:

TIS 75 0.48 kg (1.06 lb)

TIS 150 0.80 kg (1.76 lb)

TIS 75 TIS 150

Industrial Power Supplies

TIS Series 75-600 Watt

Tolerances: ±0.5 mm (±0.02)

TIS 300

Weight:

TIS 300 1.4 kg (3.09 lb)

adj

114.6

(4.51)

56.7

(2.23)

(3.54)

(1.77)

6.8

(0.27)

53.7

(2.11)

56.7

(2.23)

OUTPUT

Output

Industrial Switching

Power Supply

TIS-75-124

24VDC / 3 A

CAUTION

Do not open.

Risk of high voltage.

Read instruction manual.

Check line selection switch

before connection.

Nom. Voltage: 24 VDC

Nom. Current: 3 A

Output

+–

INPUT

Nom. Freq.: 50/60 Hz

Nom. Voltage: 115/230 VAC

Nom. Current: 1,7/0,9 A

114.6 (4.51)

53.7

(2.11)

6.8

(0.27)

56.7 (2.23)

157 (6.18)

80 (3.15)

38.5

(1.52)

Output O

Industrial Switching

Power Supply

TIS150-124

24VDC / 6 A Input

Nom. Freq.: 50/60 Hz

Nom. Voltage: 115/230 VAC

Nom. Current: 3,7/1,7 A

Nom. Voltage: 24 VDC

Nom. Current: 6 A

Output

+–

CAUTION

Do not open. Risk of high voltage.

Read instruction manual.

Check line selection switch before connection.

Output O

114.6 (4.51)

53.7

(2.11)

6.8

(0.27)

83 (3.27)

38.5

(1.52) 130 (5.12)

83 (3.27)

207 (8.15)

Industrial Switching

Power Supply

TIS 300-124

24VDC / 12A Input

Nom. Freq.: 50/60 Hz

Nom. Voltage: 115/230 VAC

Nom. Current: 5,4/3,3 A

Nom. Voltage: 24 VDC

Nom. Current: 12 A

Output

+––

CAUTION

Do not open. Risk of high voltage.

Read instruction manual.

Check line selection switch before connection.

http://www.tracopower.com Page 10

Specifications can be changed without notice

Optional Mounting Systems Dimensions mm (inches)

Industrial Power Supplies

TIS Series 75-600 Watt

Tolerances: ±0.5 mm (±0.02)

TIS 500

TIS 600

Weight:

TIS 600 2.0 kg (4.41 lb)

Weight:

TIS 500 1.9 kg (4.19 lb)

Industrial Switching

Power Supply

TIS 500-124

24VDC / 20A

Nom. Voltage: 24VDC

Nom. Current: 20 A

Output

Input

Nom. Freq.: 50/60 Hz

Nom. Voltage: 230 VAC

Nom. Current: 5,3 A

+––

CAUTION

Do not open. Risk of high voltage.

Read instruction manual.

75 (2.95)

6.8

(0.27)

83 (3.27)

83 (3.27) 130 (5.12)

220 (8.66)

130 (5.12)

46 (1.81)

Industrial Switching

Power Supply

TIS 600-124

24VDC / 24A

Nom. Voltage: 72 VDC

Nom. Current: 8 A

Output

Input

Nom. Freq.: 50/60 Hz

Nom. Voltage: 115/230 VAC

Nom. Current: 10,5/6,4 A

––

CAUTION

Do not open. Risk of high voltage.

Read instruction manual.

Check line selection switch before connection.

6.8

(0.27)

177.2 (6.98)

82.8 (3.26)

(1.26)

120.2 (4.73)

82.6 (3.25)

179 (7.05)

243 (9.57)

http://www.tracopower.com Page 11

Specifications can be changed without notice

Optional Mounting Systems Dimensions mm (inches)

Industrial Power Supplies

TIS Series 75-600 Watt

Wall mounting

Tolerances: ±0.5 mm (±0.02)

Models Order code A B C D E

TIS 75W MK-75 37 (1.46) 14.5 (0.57) –134.5 (5.30) 150.5 (5.93)

TIS 150W MK-150 132 (5.20) 13.5 (0.53) 105 (4.13) 134.5 (5.30) 150.5 (5.93)

TIS 300W MK-300 132 (5.20) 13.5 (0.53) 105 (4.13) 134.5 (5.30) 150.5 (5.93)

TIS 500W MK-500 132 (5.20) 13.5 (0.53) 105 (4.13) 134.5 (5.30) 150.5 (5.93)

TIS 600W MK-600 190 (7.48) 37.5 (1.48) 115 (4.53) 197.0 (7.76) 207.0 (8.15)

Rugged DIN-Rail mounting

Models Order code A B C

TIS 150W RMK-150 t.b.a. t.b.a. t.b.a.

TIS 300W RMK-300 t.b.a. t.b.a. t.b.a.

TIS 500W RMK-500 t.b.a. t.b.a. t.b.a.

TIS 600W standard 180 (7.09) 165 (6.50) 15.0 (0.59)

C7.5

(0.30)

4.6

(0.18)

4.2 (0.17)

25 (0.98)

50.1 (1.97)

countersink M4

Page 12

Specifications can be changed without notice

Outline Dimensions mm (inches)

Jenatschstrasse 1 • CH-8002 Zurich • Switzerland

Tel. +41-1284 2911 • Fax +41-1201 1168 • e-mail: sales@traco.ch • internet: http://www.tracopower.com

Rev. 05/01

Tolerances: ±0.5 mm (±0.02)

Industrial Power Supplies

TIS Series 75-600 Watt

TIS-24-32 AP

TIS-24-70 AP

Weight (incl. batteries):

TIS-24-32 AP 4.6 kg (10.1 lb)

TIS-24-70 AP 5.9 kg (13.0 lb)

204

(8.03)

184

(7.24)

(2.72)

Detail B

Detail A

(0.35)

5.8

(0.23)

(0.47)

(0.55)

(0.28)

100

(3.94)

135

(5.14)

(0.28)

272 (10.71)

252 (9.92)

100

(3.94)

(2.72)

152

(5.98)