ALC12A471EC400 - KEMET Electronics Corporation

1© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4022_ALC12 • 4/15/2013

One world. One KEMET

Benets

• Compact size

• 2,000 hours at +85°C (VR, IR applied)

• Excellent surge voltage capability

• Optimized designs available upon request

Overview

KEMET's ALC12 Series of capacitors is a high CV snap-in

version of the ALC10 Series range. Both series are designed

for applications where high reliability and compact sizes are

important, such as switch mode power supplies (SMPS) and

frequency converters.

Applications

KEMET's ALC12 Series of capacitors is designed for applications

where high reliability and compact sizes are important, such as

switch mode power supplies (SMPS) and frequency converters.

Snap-In Aluminum Electrolytic Capacitors

ALC12 Series, 85ºC

Part Number System

ALC12 A561 CB 200

Series Termination Capacitance Code (µF) Size Code Voltage (VDC)

Snap-In type Aluminum

Electrolytic

See Termination Table First 2 digits equals rst 2

signicant gures, 3rd digit

is the number of additional

zeros.

See Dimension Table 200 = 200

250 = 250

350 = 350

400 = 400

450 = 450

2© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4022_ALC12 • 4/15/2013

Snap-In Aluminum Electrolytic Capacitors – ALC12 Series, +85ºC

Performance Characteristics

Item Performance Characteristics

Capacitance Range 150 – 8,200 µF

Rated Voltage 200 – 450 VDC

Operational Temperature Range -40 to +85°C

Capacitance Tolerance ±20% at 100 Hz / +20°C

Operational Lifetime

D (mm)

Rated Voltage and Ripple Current at

+85°C (hours)

Rated Voltage at +85°C (hours)

30–50 2,000 9,000

End of Life Requirement ∆ C/C < ±10%, ESR < 2 x initial ESR value, IL < initial specied limit

Shelf Life 2,000 hours at +85°C or 30,000 hours at +40°C 0 VDC

Leakage Current

I = 0.003 CV or 6,000 (µA, whichever is smaller)

C = rated capacitance (µF), V = rated voltage (VDC). Voltage applied for 5 minutes at +20°C.

Vibration Test Specications

Procedure Requirements

D ≤ 40 mm

0.75 mm displacement amplitude

or 10 g maximum acceleration.

Vibration applied for three

2-hour sessions at 10 – 500 Hz

(Capacitor clamped by body).

No leakage of electrolyte or other

visible damage. Deviations in

capacitance and tanδ from initial

measurements must not exceed:

∆ C/C < 5%

D > 40 mm

0.35 mm displacement amplitude

or 5g maximum acceleration.

Vibration applied for three

0.5-hour sessions at 10 – 55 Hz

(Capacitor clamped by body).

Standards IEC 60384–4 long life grade 40/85/56

Surge Voltage

Condition Voltage (VDC)

200 250 350 400 450

≤ 30s Surge followed by a no load

period of 330s, 1,000 cycles at +85°C 230 288 385 440 495

≤ 500 ms surge, 100 cycles at 20°C,

occurring randomly throughout the life

of the capacitor

350 400 500 520 550

3© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4022_ALC12 • 4/15/2013

Snap-In Aluminum Electrolytic Capacitors – ALC12 Series, +85ºC

Test Method & Performance

Endurance Life Test

Conditions Performance

Temperature +85°C

Test Duration 2,000 hours

Ripple Current Rated ripple current in specied table

Voltage The sum of DC voltage and the peak AC voltage must not exceed the rated voltage of the capacitor

Performance The following specications will be satised when the capacitor is tested at +20°C:

Capacitance Change

≤ 160 V Within 15% of the initial value

> w160 V Within 10% of the initial value

Equivalent Series Resistance Does not exceed 200% of the initial value

Leakage Current Does not exceed leakage current limit

Dimensions – Millimeters

Size Code Dimensions in mm

-0/+1 ±2

CB 30 30

CC 30 35

CD 30 40

CE 30 45

CF 30 50

DB 35 30

DC 35 35

DD 35 40

DE 35 45

DF 35 50

DG 35 55

DH 35 60

DL 35 80

EB 40 30

EC 40 35

ED 40 40

EE 40 45

EF 40 50

EG 40 55

EH 40 60

Note: Dimensions include sleeving

Size Code Dimensions in mm

-0/+1 ±2

EL 40 80

EP 40 105

FB 45 30

FC 45 35

FD 45 40

FE 45 45

FF 45 50

FG 45 55

FH 45 60

FL 45 80

FP 45 105

KB 50 30

KC 50 35

KD 50 40

KE 50 45

KF 50 50

KG 50 55

KH 50 60

KL 50 80

KP 50 105

Note: Dimensions include sleeving

4© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4022_ALC12 • 4/15/2013

Snap-In Aluminum Electrolytic Capacitors – ALC12 Series, +85ºC

Termination Tables

Termination

Code ADF C E G H

Diameter (mm)

30 • • •

35 •••••

40 •••••••

45 • • • •

50 • • • •

Mounting: These capacitors are designed to be mounted by their terminations alone and may be used in any position.

Dummy pins must be isolated on 4 and 5 pin styles.

Termination

Code Termination

Style

±1

Standard Termination Option

A 2 Pin 6.3

G (D ≥ 45) 5 Pin 6.3

Other Termination Options

D 2 Pin 4

F 3 Pin 4

C4 Pin 6.3

E4 Pin 4

H5 Pin 4

Dimensions in mm

Style A/D

Style C/E

Style F

Style G/H

5© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4022_ALC12 • 4/15/2013

Snap-In Aluminum Electrolytic Capacitors – ALC12 Series, +85ºC

Shelf Life

The capacitance, ESR and impedance of a capacitor will not change signicantly after extended storage periods, however the leakage

current will very slowly increase. KEMET products are particularly stable and allow a shelf life in excess of three years at 40°C. See

sectional specication under each product series for specic data.

Re-age (Reforming) Procedure

Apply the rated voltage to the capacitor at room temperature for a period of one hour, or until the leakage current has fallen to a steady

value below the specied limit. During re-aging a maximum charging current of twice the specied leakage current or 5 mA (whichever

is greater) is suggested.

Reliability

The reliability of a component can be dened as the probability that it will perform satisfactorily under a given set of conditions for a

given length of time.

In practice, it is impossible to predict with absolute certainty how any individual component will perform; thus, we must utilize probability

theory. It is also necessary to clearly dene the level of stress involved (e.g. operating voltage, ripple current, temperature and time).

Finally, the meaning of satisfactory performance must be dened by specifying a set of conditions which determine the end of life of the

component.

Reliability as a function of time, R(t), is normally expressed as: R(t)=e-λt

where R(t) is the probability that the component will perform satisfactorily for time t, and λ is the failure rate.

Failure Rate

The failure rate is the number of components failing per unit time. The failure rate of most electronic components follows the

characteristic pattern:

• Early failures are removed during the manufacturing process.

• The operational life is characterized by a constant failure rate.

• The wear out period is characterized by a rapidly increasing failure rate.

The failures in time (FIT) are given with a 60% condence level for the various type codes. By convention, FIT is expressed as 1 x 10-9

failures per hour. Failure rate is also expressed as a percentage of failures per 1,000 hours.

e.g., 100 FIT = 1 x 10-7 failures per hour = 0.01%/1,000 hours

End of Life Denition

Catastrophic Failure: short circuit, open circuit or safety vent operation

Parametric Failure:

• Change in capacitance > ±10%

• Leakage current > specied limit

• ESR > 2 x initial ESR value

6© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4022_ALC12 • 4/15/2013

Snap-In Aluminum Electrolytic Capacitors – ALC12 Series, +85ºC

MTBF

The mean time between failures (MTBF) is simply the inverse of the failure rate.

MTBF= 1/λ

wear out

early failures

operational life

Failure Rate

Time

The failure rate is derived from our periodic test results. The failure rate (λR) is, therefore, only given at test temperature for life tests. An

estimation is also given at 40°C. The expected failure rate for this capacitor range is based on our periodic test results for capacitors

with structural similarity. Failure rate is frequently quoted in FIT (Failures In Time) where 1 FIT = 1 x 10-9 failures per hour. Failure rate

per hour includes both catastrophic and parametric failures.

Ta Failure Rate per Hour

85°C 250 FIT

40°C 12 FIT

Environmental Compliance

As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental effects

of both our capacitors and their production. In Europe (RoHS Directive) and in some other geographical areas like China, legislation

has been put in place to prevent the use of some hazardous materials, such as lead (Pb), in electronic equipment. All products in this

catalog are produced to help our customers’ obligations to guarantee their products and fulll these legislative requirements. The only

material of concern in our products has been lead (Pb), which has been removed from all designs to fulll the requirement of containing

less than 0.1% of lead in any homogeneous material. KEMET will closely follow any changes in legislation world wide and makes any

necessary changes in its products, whenever needed.

Some customer segments such as medical, military and automotive electronics may still require the use of lead in electrode coatings.

To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels for RoHS compatible

capacitors.

Because of customer requirements, there may appear additional markings such as LF = Lead Free or LFW = Lead Free Wires on the

label.

7© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4022_ALC12 • 4/15/2013

Snap-In Aluminum Electrolytic Capacitors – ALC12 Series, +85ºC

Table 1 – Ratings & Part Number Reference

(1) Termination code: See Termination Tables for available options.

VDC

Rated

Capacitance Size Code Case Size Ripple Current ESR

Maximum

Impedance

Maximum Part Number

100 Hz

20°C (µF)

D x L (mm)

100 Hz

85°C (A)

10 kHz

85°C (A)

100 Hz

20°C (mΩ)

10 kHz

20°C (mΩ)

200 560 CB 30 x 30 1.75 2.81 342 224 ALC12(1)561CB200

200 680 CC 30 x 35 2.06 3.36 278 181 ALC12(1)681CC200

200 1000 CD 30 x 40 2.52 3.81 201 135 ALC12(1)102CD200

200 1000 DC 35 x 35 2.58 3.63 218 151 ALC12(1)102DC200

200 1200 CF 30 x 50 3.09 4.86 162 107 ALC12(1)122CF200

200 1200 DD 35 x 40 2.96 4.18 181 125 ALC12(1)122DD200

200 1200 EB 40 x 30 2.26 2.75 243 186 ALC12(1)122EB200

200 1500 EC 40 x 35 2.73 3.35 190 145 ALC12(1)152EC200

200 1800 DF 35 x 50 3.70 5.01 128 91 ALC12(1)182DF200

200 1800 ED 40 x 40 3.17 3.90 156 119 ALC12(1)182ED200

200 2200 DH 35 x 60 4.21 5.65 107 76 ALC12(1)222DH200

200 2200 EE 40 x 45 3.54 4.32 132 101 ALC12(1)222EE200

200 2700 DL 35 x 80 4.99 6.90 93 68 ALC12(1)272DL200

200 2700 EG 40 x 55 4.27 5.26 104 79 ALC12(1)272EG200

200 3300 EH 40 x 60 4.48 5.33 96 75 ALC12(1)332EH200

200 3900 EL 40 x 80 5.55 6.90 78 60 ALC12(1)392EL200

200 5600 EP 40 x 105 8.39 12.08 43 31 ALC12(1)562EP200

200 6800 FP 45 x 105 8.85 12.05 38 28 ALC12(1)682FP200

200 8200 KP 50 x 105 9.21 11.90 34 26 ALC12(1)822KP200

250 390 CB 30 x 30 1.56 2.66 456 299 ALC12(1)391CB250

250 470 CC 30 x 35 1.82 3.17 375 244 ALC12(1)471CC250

250 560 CD 30 x 40 2.12 3.69 314 204 ALC12(1)561CD250

250 680 DC 35 x 35 2.34 3.56 285 194 ALC12(1)681DC250

250 680 EB 40 x 30 2.12 2.94 316 225 ALC12(1)681EB250

250 820 CF 30 x 50 2.75 4.62 219 144 ALC12(1)821CF250

250 820 DD 35 x 40 2.69 4.09 236 160 ALC12(1)821DD250

250 1000 EC 40 x 35 2.58 3.41 232 170 ALC12(1)102EC250

250 1200 DF 35 x 50 3.38 4.96 167 115 ALC12(1)122DF250

250 1200 ED 40 x 40 2.99 3.96 192 140 ALC12(1)122ED250

250 1500 DH 35 x 60 3.87 5.58 136 95 ALC12(1)152DH250

250 1500 EE 40 x 45 3.36 4.35 160 118 ALC12(1)152EE250

250 1800 EG 40 x55 4.02 5.32 128 93 ALC12(1)182EG250

250 2200 DL 35 x 80 4.79 6.81 94 66 ALC12(1)222DL250

250 2200 EH 40 x 60 4.28 5.43 115 86 ALC12(1)222EH250

250 2700 EL 40 x 80 5.28 7.01 85 61 ALC12(1)272EL250

250 3900 EP 40 x 105 7.72 12.08 48 32 ALC12(1)392EP250

250 4700 FP 45 x 105 8.22 12.11 42 29 ALC12(1)472FP250

250 5600 KP 50 x 105 8.63 12.03 38 27 ALC12(1)562KP250

350 220 CB 30 x 30 1.30 2.55 643 397 ALC12(1)221CB350

350 270 CC 30 x 35 1.52 3.01 522 321 ALC12(1)271CC350

350 390 CD 30 x 40 1.90 3.55 370 231 ALC12(1)391CD350

350 390 DC 35 x 35 2.02 3.51 384 243 ALC12(1)391DC350

350 470 CF 30 x 50 2.31 4.42 304 188 ALC12(1)471CF350

350 470 EB 40 x 30 1.95 2.85 368 249 ALC12(1)471EB350

350 560 DD 35 x 40 2.44 3.97 279 181 ALC12(1)561DD350

350 560 EC 40 x 35 2.32 3.50 299 199 ALC12(1)561EC350

350 680 DF 35 x 50 2.92 4.93 225 144 ALC12(1)681DF350

350 680 ED 40 x 40 2.68 4.04 246 164 ALC12(1)681ED350

350 820 EE 40 x 45 3.02 4.50 207 139 ALC12(1)821EE350

350 1000 DH 35 x 60 3.51 5.45 163 107 ALC12(1)102DH350

350 1000 EF 40 x 50 3.39 4.92 175 118 ALC12(1)102EF350

350 1200 EH 40 x 60 3.89 5.62 146 99 ALC12(1)122EH350

350 1500 DL 35 x 80 4.37 6.64 111 73 ALC12(1)152DL350

350 1800 EL 40 x 80 4.85 6.89 100 68 ALC12(1)182EL350

350 2200 EP 40 x 105 5.61 7.99 81 55 ALC12(1)222EP350

350 3300 FP 45 x 105 7.53 11.79 49 32 ALC12(1)332FP350

350 3900 KP 50 x 105 7.95 11.73 44 29 ALC12(1)392KP350

400 180 CB 30 x 30 1.21 2.38 794 509 ALC12(1)181CB400

400 220 CC 30 x 35 1.42 2.82 648 414 ALC12(1)221CC400

400 270 CD 30 x 40 1.66 3.28 529 339 ALC12(1)271CD400

VDC Rated

Capacitance Size Code Case Size Ripple Current ESR Impedance Part Number

Roll Over for

Order Info.

8© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4022_ALC12 • 4/15/2013

Snap-In Aluminum Electrolytic Capacitors – ALC12 Series, +85ºC

Table 1 – Ratings & Part Number Reference cont'd

(1) Termination code: See Termination Tables for available options.

VDC

Rated

Capacitance Size Code Case Size Ripple Current ESR

Maximum

Impedance

Maximum Part Number

100 Hz

20°C (µF)

D x L (mm)

100 Hz

85°C (A)

10 kHz

85°C (A)

100 Hz

20°C (mΩ)

10 kHz

20°C (mΩ)

400 330 DC 35 x 35 1.91 3.35 457 299 ALC12(1)331DC400

400 330 EB 40 x 30 1.79 2.86 485 326 ALC12(1)331EB400

400 390 CF 30 x 50 2.16 4.17 370 238 ALC12(1)391CF400

400 390 DD 35 x 40 2.18 3.85 385 252 ALC12(1)391DD400

400 470 EC 40 x 35 2.21 3.38 352 240 ALC12(1)471EC400

400 560 DF 35 x 50 2.75 4.72 270 178 ALC12(1)561DF400

400 560 ED 40 x 40 2.54 3.92 295 200 ALC12(1)561ED400

400 680 DH 35 x 60 3.14 5.34 226 149 ALC12(1)681DH400

400 680 EE 40 x 45 2.87 4.37 245 168 ALC12(1)681EE400

400 820 EF 40 x 50 3.22 4.80 207 143 ALC12(1)821EF400

400 1000 DL 35 x 80 3.90 6.52 155 102 ALC12(1)102DL400

400 1000 EH 40 x 60 3.71 5.46 172 119 ALC12(1)102EH400

400 1500 EL 40 x 80 4.64 6.71 115 80 ALC12(1)152EL400

400 1800 EP 40 x 105 6.11 11.06 82 53 ALC12(1)182EP400

400 2700 FP 45 x 105 7.11 11.40 59 39 ALC12(1)272FP400

400 3300 KP 50 x 105 7.60 11.38 51 35 ALC12(1)332KP400

450 150 CB 30 x 30 1.15 2.34 861 548 ALC12(1)151CB450

450 220 CC 30 x 35 1.45 2.83 596 382 ALC12(1)221CC450

450 270 CD 30 x 40 1.70 3.30 486 312 ALC12(1)271CD450

450 270 DC 35 x 35 1.82 3.30 500 324 ALC12(1)271DC450

450 330 CF 30 x 50 2.08 4.10 395 252 ALC12(1)331CF450

450 330 DD 35 x 40 2.10 3.79 410 266 ALC12(1)331DD450

450 330 EB 40 x 30 1.79 2.74 460 313 ALC12(1)331EB450

450 390 EC 40 x 35 2.13 3.35 379 255 ALC12(1)391EC450

450 470 DF 35 x 50 2.64 4.66 292 190 ALC12(1)471DF450

450 470 ED 40 x 40 2.45 3.88 314 211 ALC12(1)471ED450

450 560 EE 40 x 45 2.76 4.34 265 178 ALC12(1)561EE450

450 680 DH 35 x 60 3.23 5.22 206 136 ALC12(1)681DH450

450 680 EF 40 x 50 3.10 4.76 220 150 ALC12(1)681EF450

450 820 DL 35 x 80 3.69 6.26 182 123 ALC12(1)821DL450

450 820 EH 40 x 60 3.62 5.44 180 120 ALC12(1)821EH450

450 1000 EL 40 x 80 4.21 6.69 156 107 ALC12(1)102EL450

450 1500 EP 40 x 105 5.77 10.51 96 63 ALC12(1)152EP450

450 1800 FP 45 x 105 6.27 10.87 82 55 ALC12(1)182FP450

450 2200 KP 50 x 105 6.81 11.12 70 47 ALC12(1)222KP450

VDC Rated

Capacitance Size Code Case Size Ripple Current ESR Impedance Part Number

Roll Over for

Order Info.

9© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4022_ALC12 • 4/15/2013

Snap-In Aluminum Electrolytic Capacitors – ALC12 Series, +85ºC

Mechanical Data

Polarity and Reversed Voltage

Aluminium Electrolytic capacitors manufactured for use in DC applications contain an anode foil and a cathode foil. As such, they are

polarized devices and must be connected with the +ve to the anode foil and the -ve to the cathode foil. If this were to be reversed then

the electrolytic process that took place in forming the oxide layer on the anode would be recreated in trying to form an oxide layer on

the cathode. In forming the cathode foil in this way, heat would be generated and gas given off within the capacitor, usually leading to

catastrophic failure.

The cathode foil already possesses a thin stabilized oxide layer. This thin oxide layer is equivalent to a forming voltage of approximately

2 V. As a result, the capacitor can withstand a voltage reversal of up to 2 V for short periods. Above this voltage, the formation process

will commence. Aluminium Electrolytic capacitors can also be manufactured for use in intermittent AC applications by using two anode

foils in place of one anode and one cathode.

Mounting Position

The capacitor can be mounted upright or inclined to a horizontal position.

Insulating Resistance

≥ 100 MΩ at 100 VDC across insulating sleeve.

Voltage Proof

≥ 2,500 VDC across insulating sleeve.

Safety Vent

A safety vent for overpressure is featured on either the base (opposing end to the terminals) or the side of the can. This appears in the

form of a grooved section on the surface of the can, which is a weakened area and designed to relieve build-up of internal pressure due

to overstress or catastrophic failure.

Print Detail

• KEMET Logo

• Rated capacitance

• Capacitance tolerance

• Rated voltage

• Climatic Category

• Date of manufacture & Batch No.

• Article code

10© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4022_ALC12 • 4/15/2013

Snap-In Aluminum Electrolytic Capacitors – ALC12 Series, +85ºC

Construction

The manufacturing process begins with the anode foil being

electrochemically etched to increase the surface area and then

“formed” to produce the aluminum oxide layer. Both the anode and

cathode foils are then interleaved with absorbent paper and wound

into a cylinder. During the winding process, aluminum tabs are

attached to each foil to provide the electrical contact.

The deck, complete with terminals, is attached to the tabs and then

folded down to rest on top of the winding. The complete winding

is impregnated with electrolyte before being housed in a suitable

container, usually an aluminum can, and sealed. Throughout the

process, all materials inside the housing must be maintained at the

highest purity and be compatible with the electrolyte.

Each capacitor is aged and tested before being sleeved and

packed. The purpose of aging is to repair any damage in the oxide

layer and thus reduce the leakage current to a very low level. Aging

is normally carried out at the rated temperature of the capacitor and

is accomplished by applying voltage to the device while carefully

controlling the supply current. The process may take several hours

to complete.

Damage to the oxide layer can occur due to variety of reasons:

• Slitting of the anode foil after forming

• Attaching the tabs to the anode foil

• Minor mechanical damage caused during winding

A sample from each batch is taken by the quality department after

completion of the production process.

The following tests are applied and may be varied at the request

of the customer. In this case the batch, or special procedure, will

determine the course of action.

Electrical:

• Leakage current

• Capacitance

• ESR

• Impedance

• Tan Delta

Mechanical/Visual:

• Overall dimensions

• Torque test of mounting stud

• Print detail

• Box labels

• Packaging, including packed

quantity

Extended cathode

Anode foil

Cathode foil

Tissues

Foil tabs

Aging

Etching

Forming

Winding

Decking

Impregnation

Assembly

Testing

Sleeving

Packing

11© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4022_ALC12 • 4/15/2013

Snap-In Aluminum Electrolytic Capacitors – ALC12 Series, +85ºC

KEMET Corporation

World Headquarters

2835 KEMET Way

Simpsonville, SC 29681

Mailing Address:

P.O. Box 5928

Greenville, SC 29606

www.kemet.com

Tel: 864-963-6300

Fax: 864-963-6521

Corporate Of ces

Fort Lauderdale, FL

Tel: 954-766-2800

North America

Southeast

Lake Mary, FL

Tel: 407-855-8886

Northeast

Wilmington, MA

Tel: 978-658-1663

Central

Novi, MI

Tel: 248-994-1030

West

Milpitas, CA

Tel: 408-433-9950

Mexico

Guadalajara, Jalisco

Tel: 52-33-3123-2141

Europe

Southern Europe

Paris, France

Tel: 33-1-4646-1006

Sasso Marconi, Italy

Tel: 39-051-939111

Central Europe

Landsberg, Germany

Tel: 49-8191-3350800

Kamen, Germany

Tel: 49-2307-438110

Northern Europe

Bishop’s Stortford, United Kingdom

Tel: 44-1279-460122

Espoo, Finland

Tel: 358-9-5406-5000

Asia

Northeast Asia

Hong Kong

Tel: 852-2305-1168

Shenzhen, China

Tel: 86-755-2518-1306

Beijing, China

Tel: 86-10-5829-1711

Shanghai, China

Tel: 86-21-6447-0707

Taipei, Taiwan

Tel: 886-2-27528585

Southeast Asia

Singapore

Tel: 65-6586-1900

Penang, Malaysia

Tel: 60-4-6430200

Bangalore, India

Tel: 91-806-53-76817

Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not

assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of

KEMET Electronics Corporation.

12© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4022_ALC12 • 4/15/2013

Snap-In Aluminum Electrolytic Capacitors – ALC12 Series, +85ºC

Other KEMET Resources

Tools

Resource Location

Con gure A Part: CapEdge http://capacitoredge.kemet.com

SPICE & FIT Software http://www.kemet.com/spice

Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask

Electrolytic LifeCalculator http://www.kemet.com:8080/elc

Product Information

Resource Location

Products http://www.kemet.com/products

Technical Resources (Including Soldering Techniques) http://www.kemet.com/technicalpapers

RoHS Statement http://www.kemet.com/rohs

Quality Documents http://www.kemet.com/qualitydocuments

Product Request

Resource Location

Sample Request http://www.kemet.com/sample

Engineering Kit Request http://www.kemet.com/kits

Contact

Resource Location

Website www.kemet.com

Investor Relations http://www.kemet.com/ir

Call Us 1-877-MyKEMET

Twitter http://twitter.com/kemetcapacitors

Disclaimer

All product speci cations, statements, information and data (collectively, the “Information”) in this datasheet are subject to change. The customer is responsible for checking and

verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed.

All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied.

Statements of suitability for certain applications are based on KEMET Electronics Corporation’s (“KEMET”) knowledge of typical operating conditions for such applications, but are

not intended to constitute – and KEMET speci cally disclaims – any warranty concerning suitability for a speci c customer application or use. The Information is intended for use only

by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise

provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained.

Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still

occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective

circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage.

Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not

be required.

13© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com A4022_ALC12 • 4/15/2013

Snap-In Aluminum Electrolytic Capacitors – ALC12 Series, +85ºC

Digitally signed by Jeannette Calvo

DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corp., ou=Marketing

Communications, cn=Jeannette Calvo, email=jeannettecalvo@kemet.com

Date: 2013.04.29 16:01:33 -04'00'