Key Features
• Five ports: one SFP data input, four PoE
outputs
• VLAN tagging: access/trunk
• Authentication, authorization, and accounting:
RADIUS and TACACS
• Remotely managed: SNMP and web
• Extends network reach by additional 100 m
• Outdoor rated: IP66
• Extended temperature range: –40 ºC to 50 ºC
• IEEE 802.3at-compliant, 60 W per port
• Supports 10/100/1000 Mbps data rates
• Integral surge protection
• Plug and play installation (installer does not
have to open unit)
The PDS-104GO is an outdoor PoE switch that enables the connection
of four powered devices to a network such as an outdoor WLAN, outdoor
IP camera, or outdoor P2P radio. With VLAN and RADIUS support, the
PDS-104GO brings improved security and performance. It provides better
safety through centralized management of user profiles and authorized
system access. By regulating network traffic in each VLAN, the switch
offers increased network performance. The switch offers an SFP port
for uplink in order to support optical interfaces or electrical interfaces.
It is IP66-rated and can be installed in outdoor environments. There is
no need to open the unit during installation. Deployment is simple and
straightforward. The PDS-104GO delivers PoE power of up to 60 W per
device. In addition, it enables remote monitoring and control of the devices’
status, including remote reset. The switch extends the reach between the
switch and powered devices by an additional 100meters, to a maximum
of 200meters—a major benefit in many applications. It offers lightning
protection to the switch itself and to the indoor network.
PDS-104GO
4 + 1 Outdoor Switch, 60 W Per Port, Managed PoE, AC Input
PDS-104GO
Data
AC Power
Data and Power
Indoor
Outdoor
Indoor
Outdoor
AC Power
PDS-104GO
Outdoor WLAN AP1Outdoor Camera 2
Switch
Outdoor WLAN AP2Outdoor Camera 1
PDS-104GO
4 + 1 Outdoor Switch, 60 W Per Port, Managed PoE, AC Input
Specifications
Feature Description
Number of ports 5
Data rates SFP: 1000 mbps modules
Copper: 10/100/1000 mbps
Power over Ethernet output
Pin Assignment and Polarity:
Ports 1 and 2: 1/2, 3/6, 4/5, and 7/8
Ports 3 and 4: 1/2 and 3/6
User port power 60 W per port, 150 W total
Input power requirements Input voltage: 100 VAC–240 VAC
Input current: 2.5 A
Dimensions 240 mm × 166 mm × 72 mm
8.42 in × 5.90 in × 2.75 in
Weight 2.9 kg
Indicators No LED indicators
Connectors
Shielded RJ-45, EIA 568A, and 568B
SFP Cage
Environmental conditions
Operating ambient temperature: –40 ºF to 122 ºF (–40 ºC to 50 ºC) for 150 W
Operating humidity: maximum 90%, non-condensing
Storage temperature: –40 ºF to 185 ºF (–40 ºC to 85 ºC)
Storage humidity: maximum 95%, non-condensing
Operating altitude: Up to 6,560 feet (2000 m)
Weather rating: IP66, NEMA 4X
Reliability MTBF: 200,000 hours at 25 ºC
Thermal rating 41 BTU/Hr (at 240 VAC)
Warranty 5 years
Regulatory compliance IEEE 802.3at (PoE), RoHS-compliant, WEEE-compliant, CE
Electromagnetic emission and immunity
FCC Part 15, Class B
EN 55022 Class B
EN 55024, EN61000-4-5 Class 5
(6 kV CM)
VCCI
Surge protection GR-1089-CORE Issue 4
ITU-T K.20 6 kV on AC lines
Safety approvals UL60950-1 and UL60950-22
GS Mark
Other standards and approvals Dust and water intrusion: IEC60529, Level IP66; NEMA 250
PDS-104GO
4 + 1 Outdoor Switch, 60 W Per Port, Managed PoE, AC Input
Management Capabilities
Feature Description
System network management capabilities
Web interface—used to view unit PoE and Network status, unit configuration, and unit
production information.
SNMP v2/v3—used to monitor unit over the network (MIB-II RFC1213) and monitor/configure
unit PoE capabilities (RFC3621).
Telnet—used to view unit PoE and Network status, unit configuration, and production
information. Software update, Enable/Disable PoE functionality, ping remote network device
for connectivity test.
SNMP traps—used to report various PoE events as PoE PD insertion/removal.
SysLog—used to report PoE events, invalid remote user access, initial DHCPv4/v6 address,
and so on.
Ethernet switch network capabilities
10/100/1000 Mbps half-duplex/full-duplex Ethernet speed.
8K internal MAC address lookup engine.
Auto MDIX.
Jumbo frames.
PoE capabilities
IEEE 802.3at—delivers up to 60 Watts per port—view and statues.
PoE enable/disable—enable/disable PoE port power output (Ethernet data is always
enabled).
Weekly schedule—automatic activation/deactivation of PoE ports based on time of day.
Remote device reset—turning temporary device power off and back on resets attached PD
device..
Configuration options
Web-based—configured using a web browser.
SNMPv1/2c/3—configured using an SNMP management application on a remote computer.
Telnet—configured using a Telnet application on a remote computer.
Security and user authentication Web, Telnet, SNMPv2 and SNMPv3.
VLAN, RADIUS, and TACACS.
MSCC-0234-DB-01000-2.00-1018. 2.0. 10/18
Related Product
Part Number Name Description
PD-OUT/MBK/S Microsemi OUT/MBK/S
Mounting
brackets for
outdoor unit
Ordering Information
Part Number Name Description
PDS-104GO/AC Microsemi 104GO 4 + 1 PoE
outdoor switch
Microsemi, a wholly owned subsidiary of Microchip Technology Inc. (Nasdaq: MCHP), offers a comprehensive portfolio of semiconductor
and system solutions for aerospace & defense, communications, data center and industrial markets. Products include high-performance
and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and
synchronization devices and precise time solutions, setting the world's standard for time; voice processing devices; RF solutions; discrete
components; enterprise storage and communication solutions, security technologies and scalable anti-tamper products; Ethernet solutions;
Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Learn more at www.microsemi.com.
Microsemi Headquarters
One Enterprise, Aliso Viejo, CA 92656 USA
Within the USA: +1 (800) 713-4113
Outside the USA: +1 (949) 380-6100
Sales: +1 (949) 380-6136
Fax: +1 (949) 215-4996
email: sales.support@microsemi.com
www.microsemi.com
Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose,
nor does Microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold
by Microsemi have been subject to limited testing and should not be used in conjunction with mission-critical equipment or applications. Any performance specifications are
believed to be reliable but are not verified, and Buyer must conduct and complete all performance and other testing of the products, alone and together with, or installed in, any
end-products. Buyer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the Buyer’s responsibility to independently determine
suitability of any products and to test and verify the same. The information provided by Microsemi hereunder is provided “as is, where is” and with all faults, and the entire
risk associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights,
whether with regard to such information itself or anything described by such information. Information provided in this document is proprietary to Microsemi, and Microsemi
reserves the right to make any changes to the information in this document or to any products and services at any time without notice.
©2018 Microsemi, a wholly owned subsidiary of Microchip Technology Inc. All rights reserved. Microsemi and the Microsemi logo are registered trademarks of Microsemi
Corporation. All other trademarks and service marks are the property of their respective owners.
PDS-104GO
4 + 1 Outdoor Switch, 60 W Per Port, Managed PoE, AC Input
4 + 1 PoE Outdoor Switch
