PDS-104GO 4 + 1 Outdoor Switch, 60 W Per Port, Managed PoE, AC Input The PDS104GO is an outdoor PoE switch that enables the connection of four powered devices to a network such as an outdoor WLAN, outdoor IP camera, or outdoor P2P radio. With VLAN and RADIUS support, the PDS104GO brings improved security and performance. It provides better safety through centralized management of user profiles and authorized system access. By regulating network traffic in each VLAN, the switch offers increased network performance. The switch offers an SFP port for uplink in order to support optical interfaces or electrical interfaces. It is IP66rated and can be installed in outdoor environments. There is no need to open the unit during installation. Deployment is simple and straightforward. The PDS104GO delivers PoE power of up to 60 W per device. In addition, it enables remote monitoring and control of the devices' status, including remote reset. The switch extends the reach between the switch and powered devices by an additional 100 meters, to a maximum of 200 meters--a major benefit in many applications. It offers lightning protection to the switch itself and to the indoor network. * Five ports: one SFP data input, four PoE outputs * VLAN tagging: access/trunk * Authentication, authorization, and accounting: RADIUS and TACACS * Remotely managed: SNMP and web * Extends network reach by additional 100 m * Outdoor rated: IP66 * Extended temperature range: -40 C to 50 C * IEEE 802.3at-compliant, 60 W per port * Supports 10/100/1000 Mbps data rates * Integral surge protection * Plug and play installation (installer does not have to open unit) PDS-104GO Switch AC Power Indoor Indoor Outdoor Outdoor Data AC Power Data and Power Outdoor Camera 1 Key Features PDS-104GO Outdoor Camera 2 Outdoor WLAN AP1 Outdoor WLAN AP2 PDS-104GO 4 + 1 Outdoor Switch, 60 W Per Port, Managed PoE, AC Input Specifications Feature Description Number of ports 5 Data rates SFP: 1000 mbps modules Copper: 10/100/1000 mbps Power over Ethernet output Pin Assignment and Polarity: Ports 1 and 2: 1/2, 3/6, 4/5, and 7/8 Ports 3 and 4: 1/2 and 3/6 User port power 60 W per port, 150 W total Input power requirements Input voltage: 100 VAC-240 VAC Input current: 2.5 A Dimensions 240 mm x 166 mm x 72 mm 8.42 in x 5.90 in x 2.75 in Weight 2.9 kg Indicators No LED indicators Shielded RJ-45, EIA 568A, and 568B Connectors SFP Cage Operating ambient temperature: -40 F to 122 F (-40 C to 50 C) for 150 W Operating humidity: maximum 90%, non-condensing Storage temperature: -40 F to 185 F (-40 C to 85 C) Environmental conditions Storage humidity: maximum 95%, non-condensing Operating altitude: Up to 6,560 feet (2000 m) Weather rating: IP66, NEMA 4X Reliability MTBF: 200,000 hours at 25 C Thermal rating 41 BTU/Hr (at 240 VAC) Warranty 5 years Regulatory compliance IEEE 802.3at (PoE), RoHS-compliant, WEEE-compliant, CE Electromagnetic emission and immunity FCC Part 15, Class B EN 55022 Class B EN 55024, EN61000-4-5 Class 5 (6 kV CM) VCCI Surge protection GR-1089-CORE Issue 4 ITU-T K.20 6 kV on AC lines Safety approvals UL60950-1 and UL60950-22 GS Mark Other standards and approvals Dust and water intrusion: IEC60529, Level IP66; NEMA 250 PDS-104GO 4 + 1 Outdoor Switch, 60 W Per Port, Managed PoE, AC Input Management Capabilities Feature Description Web interface--used to view unit PoE and Network status, unit configuration, and unit production information. SNMP v2/v3--used to monitor unit over the network (MIB-II RFC1213) and monitor/configure unit PoE capabilities (RFC3621). System network management capabilities Telnet--used to view unit PoE and Network status, unit configuration, and production information. Software update, Enable/Disable PoE functionality, ping remote network device for connectivity test. SNMP traps--used to report various PoE events as PoE PD insertion/removal. SysLog--used to report PoE events, invalid remote user access, initial DHCPv4/v6 address, and so on. 10/100/1000 Mbps half-duplex/full-duplex Ethernet speed. Ethernet switch network capabilities 8K internal MAC address lookup engine. Auto MDIX. Jumbo frames. IEEE 802.3at--delivers up to 60 Watts per port--view and statues. PoE capabilities PoE enable/disable--enable/disable PoE port power output (Ethernet data is always enabled). Weekly schedule--automatic activation/deactivation of PoE ports based on time of day. Remote device reset--turning temporary device power off and back on resets attached PD device.. Web-based--configured using a web browser. Configuration options SNMPv1/2c/3--configured using an SNMP management application on a remote computer. Telnet--configured using a Telnet application on a remote computer. Security and user authentication Web, Telnet, SNMPv2 and SNMPv3. VLAN, RADIUS, and TACACS. PDS-104GO 4 + 1 Outdoor Switch, 60 W Per Port, Managed PoE, AC Input 4 + 1 PoE Outdoor Switch Related Product Part Number Name Description PD-OUT/MBK/S Microsemi OUT/MBK/S Mounting brackets for outdoor unit Ordering Information Part Number Name Description PDS-104GO/AC Microsemi 104GO 4 + 1 PoE outdoor switch Microsemi, a wholly owned subsidiary of Microchip Technology Inc. (Nasdaq: MCHP), offers a comprehensive portfolio of semiconductor and system solutions for aerospace & defense, communications, data center and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization devices and precise time solutions, setting the world's standard for time; voice processing devices; RF solutions; discrete components; enterprise storage and communication solutions, security technologies and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Learn more at www.microsemi.com. Microsemi Headquarters One Enterprise, Aliso Viejo, CA 92656 USA Within the USA: +1 (800) 713-4113 Outside the USA: +1 (949) 380-6100 Sales: +1 (949) 380-6136 Fax: +1 (949) 215-4996 email: sales.support@microsemi.com www.microsemi.com Microsemi makes no warranty, representation, or guarantee regarding the information contained herein or the suitability of its products and services for any particular purpose, nor does Microsemi assume any liability whatsoever arising out of the application or use of any product or circuit. The products sold hereunder and any other products sold by Microsemi have been subject to limited testing and should not be used in conjunction with mission-critical equipment or applications. Any performance specifications are believed to be reliable but are not verified, and Buyer must conduct and complete all performance and other testing of the products, alone and together with, or installed in, any end-products. Buyer shall not rely on any data and performance specifications or parameters provided by Microsemi. It is the Buyer's responsibility to independently determine suitability of any products and to test and verify the same. The information provided by Microsemi hereunder is provided "as is, where is" and with all faults, and the entire risk associated with such information is entirely with the Buyer. Microsemi does not grant, explicitly or implicitly, to any party any patent rights, licenses, or any other IP rights, whether with regard to such information itself or anything described by such information. Information provided in this document is proprietary to Microsemi, and Microsemi reserves the right to make any changes to the information in this document or to any products and services at any time without notice. (c)2018 Microsemi, a wholly owned subsidiary of Microchip Technology Inc. All rights reserved. Microsemi and the Microsemi logo are registered trademarks of Microsemi Corporation. All other trademarks and service marks are the property of their respective owners. MSCC-0234-DB-01000-2.00-1018. 2.0. 10/18