REVISION BZ | *,080 REF~| x [2.03] : DIMENSIONS N/A FOR N OPTION IIL aa 120 #145 REF CII [3.05] [3.68] tot BEEF AHO } REF f J .050 050 REF [4.97] [1.27] REF - 110 REF [2.79] 4 (NO. OF POS. x .050) + .155 REF [1.27] [3.94] (DIFFERENT FOR A OPTION, SEE FIG. 5) =|(NO. OF POS. x .050) + .015 REF [.38] [1.27] = Aid Ie y aa i (NO. OF oe x .050) .050 [1.27] [1.27] SFMXXDXXX 180 [4.57] REF on vA" (SEE TABLE 1) FIG. 1 2 MAX SWAY: DIMENSIONS ARE IN INCHES UNLESS OTHERWISE NOTED TOLERANCES ARE: me 050 X .050 SOCKET STRIP DWG NO: .060 [1.52] .020 [0.51] REF REF (ALTERNATE CONSTRUCTION) XX-01-XXX (See NOTE 5) .005 [.13] REF LL > .050 [1.27] SECT, "A""A" THROUGH HOLE/STRAIGHT MODIFIED S 50 USE BODY: (SFMXXDXxX) LEAD STYLE 01: THROUGH HOLE USE CONTACT: (c-44-01- XXX) (SEE FIG. 1, 1) 02; SURFACE MOUNT USE CONTACT: (C-44~02--XxX) Li: THROUGH HOLE (LOW INSERTION) USE CONTACT: (C6101Xxx) (SEE FIG. 1, SHT. 1) L2: SURFACE MOUNT cow INSERTION) USE CONTACT; (C6102XXx) (SEE FIG. 2, SHT. 1 -L3: STRAIGHT MODIFED Low OW INSERTION) USE CONTACT: (C (SEE FIG. 1, SHT. oy -Ti: THROUGH HOLE (PHOS BRONZE) USE CONTACT: (C11901XXX) (SEE FIG. 1, SHT. 1 T2: SURFACE MOUNT (PHOS BRONZE) USE CONTACT: (C119-02XXx) (SEE FIG. 2, SHT. 1) TABLE ONE PLACE DECIMALS + .1 THREE PLACE DECIMALS + .005 ANGLES TWO PLACE DECIMALS + .01 = FOUR PLACE DECIMALS + .0020 +2 DOUBLE ROW ASSEMBLY SHEET 1 oF 3 SFM1XXXXXXXDXX NO. OF POSITIONS OPTIONS ALL POSITIONS AVAILABLE (LEAVE BLANK FOR STANDARD -N: NO POLARIZATION NOTCH (USE SFMXXDXX-N) A: ALIGNMENT PIN (USE SFMXXDAX) (SEE FIGURE 5, SHT. 1) -LC: LOCKING CLIP (SEE FIGURE Ey (USE (2) LC-05M D-LOX) (AVAILABLE ON ALL LEADS) -P: PICK AND PLACE PAD (SEE FIG 6, SHT 2) TR: TAPE & REEL (SEE FIG 4, SHT 3) -K: POLYAMIDE FILM PAD (.005 13) THICKNESS WITH SILICONE ADHESIVE) (SEE FIG 3) (USE K-500-300) BODY SPECIFICATION D: DOUBLE ROW PLATING SPECIFICATION. S: SELECTIVE SPECIFY -S IN PLATING SUFFIX XXX P: GOLD FLASHED PALLADIUM WN NICKEL SPECIFY P IN PLATING SUFFIX F: FLASH SELECTIVE GOLD SPECIFY F IN PLATING SUFFIX XXX -H: HEAVY GOLD SPECIFY H IN PLATING SUFFIX XXX -x_| .120 [3.05] [ .020 [.51] SUFFIX [TAIL LENGTH "A"|TAIL WIDTH B B L: SELECTIVE LIGHT GOLD SPECIFY -L IN PLATING SUFFIX XXxX -STL: SELECTIVE GOLD/ TINLEAD TAIL x3_|_.075 [1.91] | .016 [.41] SPECIFY STL IN PLATING SUFFIX XXX PROPRIETARY NOTE THIS, DOCUMENT CONTAINS INFORMATION DIFFERENT AS SHOWN OTHERWISE SAME AS FIG. 1 (TOL ACCUM +.005 [.13] OVER 50 POS) i OF POS. (NO. OF POS. x .050) .050 [1.27] [1.27] x .050) .050 [1.27] [1.27] 2 MAX sway > EITHER DIRECTION "Re (SEE NOTE) oS (SEE NOTE) -1575+.0050 DIA [4.000+.127] FIGURE 3 K: POLYAMIDE FILM PAD NOTE: "R .019:.010 [.47+.25] || = USED MEASURED DIMENSION (REF) "s = {("R" .1575 [4.00])/2}+.020 [.51] | 180 _| [4.83] SFMXXDXXX rat i 1853868 [4.704 98 (SEE NOTE 7) FIG. 2 X2: SURFACE MOUNT (ONLY AVAILABLE ON 02 OR -L2 LEADSTYLES) SM: SELECTIVE GOLD/ MATTE TIN TAIL SPECIFY S IN SUFFIX XXX -LM: LIGHT SELECTIVE GOLD/MATTE TIN TAIL SPECIFY L IN PLATING SUFFIX XXX FM: FLASH SELECTIVE GOLD/MATTE TIN TAIL SPECIFY F IN PLATING SUFFIX XXX * = NOT RELEASED NOTES: <C)1. MIN. PUSHOUT FORCE: .5 Ib. 2. COPLANARITY: .004=POS 05 THRU 26 -006=POS 27 THRU 50 3.{C) REPRESENTS CRITICAL DIMENSION 4, TUBE ALL POSITIONS. 5. PINS CAN BE ORIENTED IN ANY DIRECTION; BOTH ROWS MUST FACE SAME WAY. 6. SEE NOTCH FOR PROPER ORIENTATION. 7. .003 [.08] MAXIMUM PIN HEIGHT VARIATION BETWEEN ANY TWO PINS. EISEE NOTE 2 MATERIAL: INSULATOR: BLACK LIQUID CRYSTAL POLYMER CONTACT MATERIAL: TIGER EYE =BeCu TIGER EYE UTE = EXISPROD\ASSEMBLY\050 SFMASM1 Samlec 520 PARK EAST BLVD. NEW ALBANY, INDIANA 47150 PHONE (812) 944-6733 P.O. BOX 1147 CODE 55322 PHOSPHOR BRONZE MADE BY: JORDAN 12/11/89 STM-TXX-XX-XAX-D-XK SFM=1XX-XX-XXX-D-XX SHEET 1 OF 3REV. IBZ] FIGURE 5 A OPTION DIFFERENT AS SHOWN, OTHERWISE SAME AS FIGURE 1 R REF -_ OF POS. x .050) + [1.91] [1.27] (NO. OF POS. x .050) + .125 [1.27] [3.18] SFMXXDAX SI JEVEVEYeYoveayeaveavevevavay .050 [1.27] REF UNLESS OTHERWISE NOTED DIMENSIONS ARE IN INCHES TOLERANCES ARE: ONE PLACE DECIMALS + .1 TWO PLACE DECIMALS + .01 THREE PLACE DECIMALS + .005 ANGLE FOUR PLACE DECIMALS + .0020 +2 me 050 X .050 s SOCKET STRIP DOUBLE ROW ASSEMBLY DWG NO: SEM-TXX-KA-XXX-D-XX SHEET 2 OF 3 .050 DIA [1.27] REF FIGURE 6 P OPTION DIFFERENT AS SHOWN, OTHERWISE SAME AS FIGURE 1 (PAD TO BE POSITIONED AS SHOWN) OO ee P .394 REF ~| [10.00] PPP02 be"A"+.010 [.25] (SEE TABLE 2) | .062 [1.57] .225 REF [5.72] PACKAGE PARIS IN TUBE AS SHOWN (SEE NOTE 4) PT-1-24-13-09 SamlEc ANTI-STATIC= , PT124-01-93 Saml@c ANTI- STATIC ; PT124-01-95 Saml@c ANTI-STATIC | & TF PP ni i LEAD STYLE PACKAGING TUBE PLUG 105X2XD, 105-X2X-D-LC, 105X2D-A PT-124-14-09 | TP24-02 -X1-D, X3-D, -X1-D-LC, -X3-D-LC (NO P&P PAD), PT-1-24-01-93 | TP24-02 -X1-D-A, -X3-D-A X1-DP, X1-D-LC-P (W/ P&P PAD), X1D-A-P PT12402-17 TP09 X2D, X2D-K, X2D-LC (NO P&P PAD), PT-124-14-09 |TP24-02 X2-DA, X2DK-A X2-DP, X3-D-P, X2DK-LC, x2D-LC-P (w/ P&P PAD), X2D-A-P, X3DA-P PT1241509 TP-24 5 POS 01 AND 03 LEAD STYLES MAY BE TUBED USING PT124-1509, TP24-02 PROPRIETARY NOTE THIS DOGUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC INC. AND SHALL NOT BE QTHER THAN THAT FOR WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC INC. TABLE 2 POS. A ODD |{(No. OF POS x .050 [1.27]) / 2} .1895 [4.813] EVEN |{(No. OF POS x .050 [1.27]) / 2} .2145 [5.448] FIGURE 7: _LC OPTION DIFFERENT AS SHOWN, OTHERWISE SAME AS FIGURE 1 | | EVE TET STEVE _.| | ose [1.41] REF (NO. OF POS. x .050) + .075 [1.27] [1.91] al SFMXXDLCX __+ .065 [1.65] REF LC0O51TM || otor.25) REF AVAILABLE IN ALL LEADS 520 PARK EAST BLVD. NEW ALBANY, INDIANA 47150 PHONE (812) 944-6733 P.O. BOX 1147 EXISPROD\ASSEMBLY\050 CODE 55322 SFMASM2 WADE BY JORDAN 12/11/89 SEM~1XX-XX-XXX-D-XX SHEET 20F 3R EV. B Z DIMENSIONS ARE IN INCHES umes Onswes Nom TOLERANCES ARE: TME: . 0 5 0 Xx . 0 50 DWG No: ONE PLACE DECIMALS + .1 THREE PLACE DECIMALS + .005 ANGLES SOCKET STRIP SFMTXX-XX-XXX-D-XX TWO PLACE DECIMALS + .01 = FOUR PLACE DECIMALS + .0020 +2 DOUBLE ROW ASSEMBLY SHEET 30F 3 FIGURE 4 TR_ TAPE AND REEL oooooo 0000 . .2.20 [56.00] POS 1\ ||| Qo 0 OJ0/|0 .630 [16.00] _| | 180 [4.57] SEE NOTE 6 1 f UNWINDING DIRECTION =- .195 [4.95] EXISPROD\ASSEMBLY\050 Es es SFMASMS PROPRIETARY NOTE S P= | I } e | ; THRAEIDENTIAL AND PROPRIETARY TO oe HEPRODUCRD OR THANSTERTED TO 520 PARK EAST BLVD. NEW ALBANY, INDIANA 47150 Sheree i ae Renae PHONE (812) 9446735 P.O. BOX 1147 (OBTAINED WTHOUT THE EXPRESSED oeeee MADE BY JORDAN 12/11/89 SFM1XX-XX-XXX-D-XX SHEET 3 OFS