Datum Anforderungsstufe date ERNI RC 2 2,9 11,6 max XXXX -0,3 class a c e 26 0,2 1 Ubergabesteckzone 5 mating transfer zone 5,08 0,6 15 x 5,08 = 76,2 2 x 5,08 = 10,16 95 max a32 a2 13,6 -0,1 +0,2 3 c 0,3 15,7 -0,3 6 a Elastische Einpresszone mit Ubergabesteckzone / e 2,8 +0,1 1 +0,1 e2 85 -0,2 e32 compliant pressfit zone with mating tranfer zone Isolierwerkstoff / housing material: PBT GF30 Bauart 7 / type 7 Anforderungsstufe 2 = 400 Steckzyklen / performance class 2 = 400 mating cycles Fehlende Masse und Angaben nach IEC 60 603-2 / DIN EN 60 603-2 Missing information and dimensions per IEC 60 603-2 / DIN EN 60 603-2 90 0,10 Bestuckungsplan / contact layout 32 30 28 26 24 22 Schichtaufbau im metallisierten Loch siehe Zeichnung 164062 / Nr. 10 bestuckt / assembled 20 18 16 14 12 10 8 6 diameter of drilled hole see drawing 164062 / No. 10 4 0,09 1) o 1,6 +- 0,06 Durchmesser des metallisierten Loches 2 0,09 Diameter of finished plated-through hole o 1,6 +- 0,06 a Bedruckung siehe Zeichnung 294875 Marking see drawing 294875 e Leiterplatten-Lochbild / PCB drillhole pattern 1) +0,1 alle Locher / 0,05 all holes a c e 32 30 28 5,08 26 24 22 20 18 16 15 x 5,08 = 76,2 90 14 12 10 8 6 4 2 8,17 Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 2,8 0,3 2 x 5,08 = 10,16 c Tolerances Information: 2:1 Scale All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. Federleiste E 48 EE Fem. Connector E 48 Pressfit 364073 www.ERNI.com - 19.06.2008 Index Date Class STVE I A3