DTM60119 128MB-16M x 72, 168-Pin Unbuffered PC100 SDRAM DIMM Identification Part Number:DTM60119 Performance range 1 0 0 M H z ( 1 0 n s @ C L =2) Features Description Burst mode operation The Dataram DTM60119 Assembly is a 16M bit x 72 Synchronous Dynamic RAM high density memory module. The DTM60119 consists of eight CMOS Monolithic 16Mx8 bit Synchronous DRAMs in a TSOP-II 400MiI package, and one 2K EEPROM in 8 pin TSSOP package for Serial Presence Detect on a 168-pin glass-epoxy substrate. Synchronous design allows precise cycle control with the use of system clock. The DTM60119 is a Dual in-line Memory Module and is intented for mounting into 168-pin edge connector sockets. Auto & self refresh capability (4096 Cycles/64ms) LVTTL compatible inputs and outputs Single 3.3V0.3V power supply MRS cycle with address key programs Latency (Access from column address) Burst length (1, 2, 4 & 8 page) Data scramble (Sequential & Interleave) Serial presence detect with EEPROM 168-pin PC100 DIMM double-sided assembly 5.250" wide by 1.375" high DATARAM Corporation P.O. Box 7528, Princeton, NJ 08543-7528; Voice: 609-799-0071, Fax: 609-799-6734, www.dataram.com Document 06039, Revision A, 1/31/00, Dataram Corporation (c) 2000 Page 1