Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Inductive sensor with extended switching distance Bi2-EG08-AG41X M8 x 1 13/4 40 LED 1,6 Type Ident-No. Bi2-EG08-AG41X 4562000 Rated operating distance Sn Mounting mode Hysteresis (switching distance) Min. repeat accuracy Temperature drift Operating temperature 2 mm flush 1... 15 % 2 % 10 % -25 ...+ 70 C Rated operational voltage (DC) UB 10... 55 VDC Max. ripple 10 % Upp Rated operational current (DC) Ie 100 mA Max. OFF-state current Max. switching frequency Rated insulation voltage Short-circuit protection Max. voltage drop at Ie 0,6 mA 1 kHz 0,5 kV yes, cyclic 3,5 V Housing style Dimensions Housing material Active face Max. fixing torque of coupling nut Wiring Cable Cable cross section Vibration resistance Shock resistance Degree of protection threaded barrel; M8 x 1 41,6 mm metal, A2 1.4301 (AISI 304) plastic, PA12-GF20 10 Nm cable O 4, LifYY, PVC, 2 m 2 x 0,25 mm2 55 Hz (1 mm) 30 x g (11 ms) IP67 Switching status indication LED yellow threaded barrel, M8 x 1 stainless steel, 1.4301 extended switching distance 2-wire DC, 10...55 VDC polarized version normally open cable connection Wiring diagram BN + BU Function principles Inductive proximity switches are designed for wear-free non-contact detection of metal objects. For this they use a high-frequency electro-magnetic AC field that interacts with the target. With conventional inductive sensors, this field is generated by an LC resonant circuit with a ferrite core coil. Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: * 15.04.2004 Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Inductive sensor with extended switching distance Bi2-EG08-AG41X Mounting instructions Gap D Gap W Gap T Gap S Gap G minimum gap 2xB 3 x Sn 3xB 1,5 x B 6 x Sn Diameter of active face B O 8 mm G S D T W Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: * 15.04.2004 Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264 Inductive sensor with extended switching distance Bi2-EG08-AG41X Accessories Typ BST-08B IdentNo. 6947210 Description Dimension drawing fixing clamp with dead-stop; material: PA6 M3 7,4 4 12 20 o8 QM-08 6945100 16 quick-mount fixing clamp with dead-stop; material: chrome-plated brass external thread M12 x 1 17/4 o8 17,5 32 Subject to change without notice * (c) Hans Turck GmbH & Co.KG 2002 * Edition: * 15.04.2004 Hans Turck GmbH & Co.KG * Postfach * D-45466 Mulheim an der Ruhr * Telefon 02 08/49 52-0 * Telefax 02 08/49 52-264