Max. switched power: 90 W or 125 VA
Max. switched current: 3 A
Max. switched voltage: 220 VDC or 250 VAC
Material Gold plated silver against palladium silver.
Gold plated palladium silver against palladium
silver
Gold plated silver against gold plated silver
Resistance < 50 milliohms initially
POLARIZED DIP RELAY
BISTABLE (LATCHING)
FEATURES
•High sensitivity, 42 mW pickup
•Low profile DIP package
•Meets FCC Part 68.302 1500 V lightning surge
•Meets FCC Part 68.304 1000 V dielectric
•Single and dual coil versions
•DC coils to 24 VDC
•High switching capacity, 60 W, 250 VA
•Fits standard 16 pin IC socket
•Epoxy sealed for automatic wave soldering and cleaning
•UL, CUR file E43203
GENERAL DATA
Life Expectancy Minimum operations
Mechanical 2 x 107
Electrical 1 x 105at 2 A, 30 VDC or 1 A, 125 VAC
2 x 106at 1 A, 30 VDC or .5 A, 125 VAC
Set Time (typical) 3 ms at nominal coil voltage
Reset Time (typical) 3 ms at nominal coil voltage
Bounce (typical) 3 ms
Dielectric Strength 1500 Vrms contact to coil
(at sea level) 1000 Vrms between contact sets
1000 Vrms across contacts
Meets FCC Part 68.302 lightning surge
Meets FCC Part 68.304 V dielectric
Insulation Resistance 1000 megohms min. at 20°C, 500 VDC,
50% RH
Ambient Temperature At nominal coil voltage
Operating -40°C (-40°F) to 85°C (185°F)
Storage -40°C (-40°F) to 115°C (239°F)
Vibration 50 g at 10–500 Hz
Shock 50 g
Enclosure P.B.T. polyester
Terminals Tinned copper alloy, P.C.
Max. Solder Temp. 270°C (518°F)
Max. Solder Time 5 seconds
Max. Solvent Temp. 80°C (176°F)
Max. Immersion Time 30 seconds
Weight 5 grams
COIL
Power
At Pickup Voltage Standard coil: 56 mW
(typical) Sensitive coil: 42 mW
Max. Continuous 0.9 W at 20°C (68°F)
Dissipation
Temperature Max. 115°C (239°F)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Relay has fixed coil polarity.
4. For complete isolation between the relay’s magnetic fields, it is
recommended that a .197" (5.0 mm) space be provided between
adjacent relays.
5. Relay adjustment may be affected if undue pressure is exerted
on relay case.
6. Specifications subject to change without notice.