AVSMCJ5.0A thru AVSMCJ70CA, e3 and AVSMCG5.0A thru AVSMCG70CA, e3 SURFACE MOUNT 1500 Watt Transient Voltage Suppressor SCOTTSDALE DIVISION APPEARANCE The AVSMCJ5.0-70A or AVSMCG5.0-70A series of 1500 W Transient Voltage Suppressors (TVSs) protects a variety of voltage-sensitive components. It is available in J-bend design (AVSMCJ) with the DO-214AB package for greater PC board mounting density or in a Gull-wing design (AVSMCG) in the DO215AB for visible solder connections. Selections include unidirectional and bidirectional as well as RoHS Compliant designated with an e3 suffix. They can protect from secondary lightning effects per IEC61000-4-5 and class levels defined herein, or for inductive switching environments and induced RF protection. Since their response time is virtually instantaneous, they can also be used in protection from ESD and EFT per IEC61000-4-2 and IEC61000-44. NOTE: All SMC series are equivalent to prior SMM package identifications. WWW . Microsemi .C OM DESCRIPTION IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com FEATURES * * * TEOS Passivation for improved reliability. Selections for 5.0 to 70 volts standoff voltages (VWM) 100% screened as follows for avionics applications: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. * * APPLICATIONS / BENEFITS Temperature Cycle (thermal shock) 20 Cycles -55C to 125C Solder Capability: Stress Tested at 260C for 10 sec. Surge 1 pulse at 110% Ipp (Both Directions for Bidirectional) Surge 1 pulse at 100% Ipp (Both Directions for Bidirectional) Electrical Test Burn-in (HTRB) 48 hrs 125C Polarity A for Bidirectional (96 hrs for Unidirectional) Electrical Test Delta ID and V(BR) Polarity A Burn-in (HTRB) 48 hrs 125C Polarity B for bidirectional (not required for Unidirectional) Electrical Test Delta ID and V(BR) Polarity B (Not required for Unidirectional) Electrical Test GO-NO-GO Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B RoHS Compliant devices available by adding an "e3" suffix * * * * Class 1: Class 2: Class 3: Class 4: * * * * * * * Secondary lightning protection per IEC61000-4-5 with 2 Ohms source impedance: Class 2: AVSMC 5.0 to AVSMC 22A or CA Class 3: AVSMC 5.0 to AVSMC 10A or CA MECHANICAL AND PACKAGING Peak Pulse Power dissipation at 25 C: 1500 watts at 10/1000 s (also see Fig 1,2, and 3) Impulse repetition rate (duty factor): 0.01% tclamping (0 volts to V(BR) min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional Operating and Storage temperature: -65C to +150C Thermal resistance: 20C/W junction to lead, or 80C/W junction to ambient when mounted on FR4 PC board (1oz Cu) with recommended footprint (see last page) Steady-State Power dissipation: 6 watts at TL = 30oC, or 1.56 watts at TA = 25C when mounted on FR4 PC board with recommended footprint Forward Surge: 200 Amps peak impulse of 8.3 ms half-sine wave at 25C (unidirectional only) Solder temperatures: 260 C for 10 s (maximum) Copyright (c) 2008 11-20-08 REV C; AVSMC5-70 AVSMC 5.0 to AVSMC 70A or CA AVSMC 5.0 to AVSMC 45A or CA AVSMC 5.0 to AVSMC 24A or CA AVSMC 5.0 to AVSMC 11A or CA * * * * * * * 2-Stage: Robust, High Reliability Lead Frame CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0 TERMINALS: Gull-wing or C-bend (modified J-bend) leads Tin-Lead or RoHS compliant annealed matte-Tin plating solderable per MIL-STD-750, method 2026 POLARITY: Cathode indicated by band. No band on bi-directional devices. MARKING: See Page 2 marking column. TAPE & REEL option: Standard per EIA-481-2 with 16 mm tape, 750 per 7 inch reel or 2500 per 13 inch reel. WEIGHT: 0.25 grams Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 AVSMC 5.0-70CA, e3 * * AVSMC 5.0 to AVSMC 70A or CA AVSMC 5.0 to AVSMC 70A or CA AVSMC 5.0 to AVSMC 70A or CA AVSMC 5.0 to AVSMC 36A or CA Secondary lightning protection per IEC61000-4-5 with 12 Ohms source impedance: Class 1 : Class 2: Class 3: Class 4: MAXIMUM RATINGS * Selections for 5.0 to 170 volts standoff voltages (VWM) Protection from switching transients and induced RF Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4 Secondary lightning protection per IEC61000-4-5 with 42 Ohms source impedance: AVSMCJ5.0A thru AVSMCJ70CA, e3 and AVSMCG5.0A thru AVSMCG70CA, e3 SURFACE MOUNT 1500 Watt Transient Voltage Suppressor SCOTTSDALE DIVISION @ 25oC UNLESS OTHER WISE SPECIFIED REVERSE STANDOFF VOLTAGE VWM MICROSEMI PART NUMBER BREAKDOWN VOLTAGE VBR @ I(BR) MAXIMUM CLAMPING VOLTAGE @ IPP PEAK PULSE CURRENT (See Fig. 2) IPP MAXIMUM STANDBY CURRENT ID @ VWM Volts Gull-Wing Lead Modified "J" Bend Lead Marking AVSMCG5.0A AVSMCJ5.0A AVSMCG6.0A Volts MIN. I(BR) mA Volts Amps A AVC5.0A 5.0 6.40 10 9.2 163.1 800 AVSMCJ6.0A AVC6.0A 6.0 6.67 10 10.3 145.6 800 AVSMCG7.5A AVSMCJ7.5A AVC7.5A 7.5 8.33 1 12.9 116.3 100 AVSMCG10A AVSMCJ10A AVC10A 10 11.1 1 17.0 88.2 5 AVSMCG11A AVSMCJ11A AVC11A 11 12.2 1 18.2 82.4 5 AVSMCG12A AVSMCJ12A AVC12A 12 13.3 1 19.9 75.3 5 AVSMCG13A AVSMCJ13A AVC13A 13 14.4 1 21.5 69.7 1 AVSMCG15A AVSMCJ15A AVC15A 14 15.6 1 25.8 58.1 1 AVSMCG16A AVSMCJ16A AVC16A 16 17.8 1 26.0 57.7 1 AVSMCG18A AVSMCJ18A AVC18A 18 20.0 1 29.2 51.4 1 AVSMCG24A AVSMCJ24A AVC24A 24 26.7 1 38.9 38.6 1 AVSMCG26A AVSMCJ26A AVC26A 26 28.9 1 42.1 35.6 1 AVSMCG30A AVSMCJ30A AVC30A 30 33.3 1 48.4 31.0 1 AVSMCG40A AVSMCJ40A AVC40A 40 44.4 1 64.5 23.2 1 AVSMCG43A AVSMCJ43A AVC43A 43 47.8 1 69.4 21.6 1 AVSMCG48A AVSMCJ48A AVC48A 48 53.3 1 77.4 19.4 1 AVSMCG60A AVSMCJ60A AVC60A 60 66.7 1 96.8 15.5 1 AVSMCG64A AVSMCJ64A AVC64A 64 71.1 1 103 14.6 1 AVSMCG70A AVSMCJ70A AVC70A 70 77.8 1 113 13.3 1 " * "FOR OTHER VOLTAGES CONTACT THE FACTORY" For Bidirectional device types indicate a C or CA suffix after the part number. (e.g.: AVSMCG170CA). Bidirectional capacitance is half that shown in figure 4 at zero volts. Microsemi Corp's SMC series (1500 W) surface mountable packages are designed specifically for transient voltage suppression. The wide leads assure a large surface contact for good heat dissipation, and a low resistance path for surge current flow to ground. These high speed transient voltage suppressors can be used to effectively protect sensitive components such as integrated circuits and MOS devices. Symbol VWM PPP V(BR) ID Definition SYMBOLS & DEFINITIONS Symbol Working Peak (Standoff) Voltage Peak Pulse Power Breakdown Voltage Standby Current Copyright (c) 2008 11-20-08 REV C; AVSMC5-70 IPP VC I(BR) Definition Peak Pulse Current Clamping Voltage Breakdown Current for V(BR) Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 2 AVSMC 5.0-70CA, e3 * WWW . Microsemi .C OM ELECTRICAL CHARACTERISTICS AVSMCJ5.0A thru AVSMCJ70CA, e3 and AVSMCG5.0A thru AVSMCG70CA, e3 SURFACE MOUNT 1500 Watt Transient Voltage Suppressor SCOTTSDALE DIVISION (PPP) - Peak Pulse Power - kW 100 (Waveform - See Figure 2) Non-repetitive 10 Test wave form parameters tr = 10sec. tp = 1000sec. 1.0 0 1s 10sec 100sec tp - Pulse Time - sec 1ms 10ms WWW . Microsemi .C OM GRAPHS FIGURE 2 - PULSE WAVEFORM FIGURE 1 - Peak Pulse Power vs. Pulse Time Peak Pulse Power (PPP) or continuous o Power in Percent of 25 C Rating PAD LAYOUT A B C INCHES .390 .110 .150 SMCJ mm 9.90 2.79 3.81 SMCG o TL Lead Temperature C FIGURE 4 FIGURE 3 - Derating Curve Typical Capacitance vs. Breakdown Voltage A B C INCHES 0.510 0.110 0.150 mm 12.95 2.79 3.81 DO-215AB MIN MAX A .115 .121 MIN MAX 2.92 3.07 DIMENSIONS IN INCHES B C D E F .260 .220 .305 .077 .380 .280 .245 .320 .104 .400 DIMENSIONS IN MILLIMETERS 6.60 5.59 7.75 1.95 9.65 7.11 6.22 8.13 2.65 10.16 K .025 .040 L .030 .060 0.635 1.016 .760 1.520 Typical Standoff Height: 0.004" - 0.008" (0.1mm - 0.2mm) Copyright (c) 2008 11-20-08 REV C; AVSMC5-70 Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 3 AVSMC 5.0-70CA, e3 PACKAGE DIMENSIONS DO-214AB