Felcom 54 Power entry modules with line filter www.schurter.com/pg06 Inlet filter, modular assembling Standard- or Medical-Filter 5411.XX5X.XXX Appliance inlet Fuseholder Line filter 5431.X05X.XXX Appliance inlet Appliance outlet Switch Line filter C14 70 C Description - Panel Mount: Snap-In Version from front side - 2 - 5 Functions: Inlet Protection class I, Outlet, Line switch 2-pole, Fuseholder for fuselinks 5 x 20 mm 1 or 2pole, Line filter in standard and medical version - Solder terminals 3.5 x 0.8 mm or quick connect terminals 6.3 x 0.8 mm - Alternative: version without line filter Felcom 64 Approvals Characteristics - Modular component selection - Individual components soldered on a printed circuit board - Plug removal necessary for fuse-link replacement Fuse drawer meets requirements of medical standard IEC/EN 60601-1 The fuseholder is accessible from the equipment front - Technical data of filter-components see blockfilter type 5500 - Fully insulated from the rear - Qualified for use in equipment according IEC/EN 60950 Other versions on request - Line switch with other rocker marking References - VDE License Number: 101307 - UL License Number: E72928 General Product Information Weblinks Approvals, RoHS, CHINA-RoHS, e-Store, SCHURTER-Stock-Check, Distributor-Stock-Check Technical Data Ratings IEC Ratings UL/CSA Leakage Current Dielectric Strength Allowable Operation Temp. Climatic Category Degree of Protection Protection Class Terminal Panel Thickness s Material: Housing 1 - 6 A @ Ta 40 C / 250 VAC; Hz 50 1 - 6 A @ Ta 40 C / 125 VAC; 60 Hz standard < 0.5 mA (250 V / 60 Hz) medical < 5 A (250 V / 60 Hz) > 1.7 kVDC between L-N > 2.7 kVDC between L/N-PE Test voltage (2 sec) -25 C to 85 C 25/085/21 acc. to IEC 60068-1 from front side IP 40 acc. to IEC 60529 Suitable for appliances with protection class I acc. to IEC 61140 Solder terminals 3.5 x 0.8 mm or quick connect terminals 6.3 x 0.8 mm Snap-in: 1/1.2/1.5/2/2.5/3 mm Thermoplastic, black, UL 94V-0 Appliance-Inlet /-Outlet Fuseholder Rated Power Acceptance @ Ta 23 C Power Acceptance @ Ta > 23C Line Switch Line Filter MTBF EMC products C14 acc. to IEC/EN 60320-1, F acc. to IEC/EN 60320-2-2, UL 498, CSA C22.2 no. 42 (for cold condition) pin-temperature 70 C, 10 A, Protection class I 1 or 2 pole, Shocksafe category PC2 acc. to IEC 60127-6, for fuse-links 5 x 20 mm 5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per pole Admissible power acceptance at higher ambient temperature see derating curves Rocker switch 2-pole, non-illuminated, acc. to IEC 61058-1 Technical details Standard Version, IEC 60939, IEC 606011, UL 1283, UL 544, EN 133 200, CSA C22.2 no. 8 Technical details > 1'400'000 h acc. to MIL-HB-217 F Felcom 54 Power entry modules with line filter www.schurter.com/pg06 Dimensions Variants 5411.XX5X.XXX Mounting O: 63+0,2 x 27.6+0,2 Variants 5421.X05X.XXX Mounting O: 85.9+0,2 x 27.6+0,2 Variants 5423.XX5X.XXX Mounting O: 96.4+0,2 x 27.6+0,2 Variants 5424.XX5X.XXX Mounting O: 87.9+0,2 x 27.6+0,2 Variants 5431.X05X.XXX Mounting O: 111.1+0,2 x 27.6+0,2 Variants 5432.XX5X.XXX Mounting O: 121.6+0,2 x 27.6+0,2 Technical Data of Filter-Components Rated Current [A] Filter-Type Inductances L [mH] Capacitance CX [nF] Capacitance CY [nF] R [MW] 2 Standard Version 2x4 47 2.2 - 4 Standard Version 2 x 1.6 47 2.2 - 6 Standard Version 2 x 0.7 47 2.2 - 6 Standard Version 2 x 11 47 2.2 - 2 Medical Version (M5) 2x4 47 - 1 4 Medical Version (M5) 2 x 1.6 47 - 1 6 Medical Version (M5) 2 x 0.7 47 - 1 6 Medical Version (M5) 2 x 11 47 - 1 EMC products Felcom 54 Power entry modules with line filter www.schurter.com/pg06 5421 5423 5424 1) Line 2) Load 1 1) Load 2 2) Load 1 1) Load 2 2) Load 1 1) Line 2) Load 1 5431 5432 1) Load 2 2) Load 1 1) Load 2 2) Load 1 Derating Curves 1-pole 2-pole (per pole) Admissible power acceptance in Watt 2.0 1.5 I = 1.0 In I = 0.7 In 1.0 I = < < In 0.5 0.0 0 20 40 60 80 100 Admissible power acceptance in Watt per pole Diagrams 5411 Ambient air temperature Ta C Packaging unit 1.6 1.4 1.2 I = 1.0 In 1.0 0.8 I = 0.7 In 0.6 I = << In 0.4 0.2 0.0 0 20 40 60 80 100 Ambient air temperature Ta C 10 Pcs Accessory Description Assorted Covers Rear Cover Cord retaining kits Cord retainning strain reliefe EMC products Felcom 54 Power entry modules with line filter www.schurter.com/pg06 Ordering instructions 54 XX. X X XX. XX X Type of line filter 1 = standard 3 = medical "Snap-in" panel thickness 10 = 1,0 mm 12 = 1,2 mm 15 = 1,5 mm 20 = 2,0 mm 25 = 2,5 mm 30 = 3,0 mm Connection 51 = solder terminals 3,5 x 0,8 mm 53 = quick connect terminals 6,3 x 0,8 mm Fuseholder 5 x 20 mm 0 = without fuseholder 1 = 1-pole 2 = 2-pole Line filter 1 = 1 Amp. 2 = 2 Amp. 4 = 4 Amp. 6 = 6 Amp. Module combination 11 = Appliance inlet, fuseholder 21 = Appliance inlet, appliance outlet 23 = Appliance inlet, fuseholder, appliance outlet 24 = Appliance inlet, fuseholder, switch 31 = Appliance inlet, appliance outlet, switch 32 = Appliance inlet, fuseholder, appliance outlet, switch Base model The specifications, descriptions and illustrations indicated in this document are based on EMC products current information. All content is subject to modifications anamendments.