SFH 4545
1Version 1.5 | 2018-08-10
Produktdatenblatt | Version 1.1
www.osram-os.com
SFH 4545
Radial T1 3/4
High Power Infrared Emitter (940 nm)
Applications
Electronic Equipment
Industrial Automation (Machine Controls, Light
Barriers, Vision Controls)
Safety and Security, CCTV
Smoke Detectors
Features:
Package: black epoxy
ESD: 2 kV acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)
High Power Infrared LED
Short switching times
Ordering Information
Type Radiant intensity 1) Radiant intensity 1) Ordering Code
typ.
IF = 100 mA; tp = 20 ms IF = 100 mA; tp = 20 ms
IeIe
SFH 4545 250 ... 1250 mW/sr 550 mW/sr Q65110A8095
SFH 4545-DWEW 400 ... 1250 mW/sr 550 mW/sr Q65111A3701
SFH 4545
2Version 1.5 | 2018-08-10
Maximum Ratings
TA = 25 °C
Parameter Symbol Values
Operating temperature Top min.
max.
-40 °C
100 °C
Storage temperature Tstg min.
max.
-40 °C
100 °C
Forward current IFmax. 100 mA
Surge current
tp≤100µs;D=0
IFSM max. 1 A
Reverse voltage 2) VRmax. 12 V
Power consumption Ptot max. 180 mW
ESD withstand voltage
acc. to ANSI/ESDA/JEDEC JS-001 (HBM, Class 2)
VESD max. 2 kV
SFH 4545
3Version 1.5 | 2018-08-10
Characteristics
IF = 100 mA; tp = 20 ms; TA = 25 °C
Parameter Symbol Values
Peak wavelength
λ
peak typ. 950 nm
Centroid wavelength 3)
λ
centroid min.
typ.
max.
920 nm
940 nm
960 nm
Spectral bandwidth at 50% Irel,max
∆λ
typ. 42 nm
Half angle
φ
typ. 5 °
Dimensions of active chip area L x W typ. 0.3 x 0.3
mm x mm
Rise time (10% / 90%)
IF = 100 mA; RL=50Ω
trtyp. 12 ns
Fall time (10% / 90%)
IF = 100 mA; RL=50Ω
tftyp. 12 ns
Forward voltage VFtyp.
max.
1.5 V
1.8 V
Forward voltage
IF = 1 A; tp=100µs
VFtyp.
max.
2.3 V
3 V
Reverse current 2)
VR = 5 V
IRmax.
typ.
10µA
0.01µA
Radiant intensity 1)
IF = 1 A; tp=25µs
Ietyp. 4200 mW/sr
Totalradiant󰘱ux4)
Φ
etyp. 55 mW
Temperaturecoe󰘲cientofvoltage TCVtyp. -1.3 mV / K
Temperaturecoe󰘲cientofbrightness TCItyp. -0.5 % / K
Temperaturecoe󰘲cientofwavelength TC
λ
typ. 0.3 nm / K
Thermal resistance junction ambient real 5) RthJA max. 450 K / W
SFH 4545
4Version 1.5 | 2018-08-10
Brightness Groups
TA = 25 °C
Group Radiant intensity Radiant intensity
IF = 100 mA; tp = 20 ms IF = 100 mA; tp = 20 ms
min. max.
IeIe
CW 250 mW/sr 500 mW/sr
DW 400 mW/sr 800 mW/sr
EW 630 mW/sr 1250 mW/sr
Only one group in one packing unit (variation lower 2:1).
800
0nm
%
OHF04134
20
40
60
80
100
I
rel
λ
850 900 950
1025
Relative Spectral Emission 6), 7)
Irel = f (
λ
); IF = 100 mA; tp = 20 ms
SFH 4545
5Version 1.5 | 2018-08-10
OHF03594
20˚ 40˚ 60˚ 80˚ 100˚ 120˚0.40.60.81.0
100˚
90˚
80˚
70˚
60˚
50˚
10˚20˚30˚40˚
0
0.2
0.4
0.6
0.8
ϕ
Radiation Characteristics 6), 7)
Irel = f (
φ
)
OHF03821
10-3
mA
101
0
10
5
5
10-1
-2
5
10
e
e
I
I
I
F
0
10 1
10 2
10 3
1055
(100 mA)
Radiant Intensity 6), 7)
Ie/Ie(100mA) = f (IF); single pulse; tp=25µs
OHF03822
F
I
10
-4
V
10
0
A
0
F
V
-1
10
5
5
10
-2
-3
5
10
0.5 1 1.5 2 2.5
Forward current 6), 7)
IF = f (VF); single pulse; tp=100µs
SFH 4545
6Version 1.5 | 2018-08-10
0.05
210-1-2-3-4-5 1010 1010 10
t
p
10 10s10
0
0.1
0.005
0.02
0.01
D
=
T
t
A
I
F
D
=
I
P
T
F
P
t
OHF05438
0.2
0.5
1
0.033
0.2
0.4
0.6
0.8
1.0
1.2
Permissible Pulse Handling Capability
IF = f (tp); duty cycle D = parameter; TA = 25°C
T
OHR00880
0
F
Ι
0 20 40 60 80 100˚C
mA
25
50
75
100
125
Max. Permissible Forward Current
IF,max = f (TA); RthJA = 450 K / W
210-1-2-3-4-5
1010 1010 10
t
p
10 10s10
0
T
t
A
I
F
D
=
I
P
T
F
P
t
OHF05587
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
0.5
0.01
0.05
0.1
0.2
0.02
0.005
D
=
Permissible Pulse Handling Capability
IF = f (tp); duty cycle D = parameter; TA = 85°C
SFH 4545
7Version 1.5 | 2018-08-10
Dimensional Drawing 8)
Approximate Weight: 298.0 mg
Package marking: Cathode
SFH 4545
8Version 1.5 | 2018-08-10
Pad 1: cathode
Recommended Solder Pad 8)
SFH 4545
9Version 1.5 | 2018-08-10
TTW Soldering
IEC-61760-1 TTW
0
0s
OHA04645
50
100
150
200
250
300
t
T
˚C
235 ˚C - 260 ˚C
First wave
20 40 60 80 100 120 140 160 180 200 220 240
Second wave
10 s max., max. contact time 5 s per wave
Preheating
T
100 ˚C
120 ˚C
130 ˚C
Typical
Cooling
ca. 3.5 K/s typical
ca. 2 K/s
ca. 5 K/s
Continuous line: typical process
Dotted line: process limits
< 150 K
SFH 4545
10 Version 1.5 | 2018-08-10
Notes
The evaluation of eye safety occurs according to the standard IEC 62471:2006 (photo biological safety of
lampsandlampsystems).WithintheriskgroupingsystemofthisIECstandard,thedevicespeci󰘰edinthis
data sheet falls into the class exempt group (exposure time 10000 s). Under real circumstances (for expo-
sure time, conditions of the eye pupils, observation distance), it is assumed that no endangerment to the
eye exists from these devices. As a matter of principle, however, it should be mentioned that intense light
sourceshaveahighsecondaryexposurepotentialduetotheirblindinge󰘯ect.Whenlookingatbrightlight
sources (e.g. headlights), temporary reduction in visual acuity and afterimages can occur, leading to irrita-
tion, annoyance, visual impairment, and even accidents, depending on the situation.
Subcomponentsofthisdevicecontain,inadditiontoothersubstances,metal󰘰lledmaterialsincludingsilver.
Metal󰘰lledmaterialscanbea󰘯ectedbyenvironmentsthatcontaintracesofaggressivesubstances.There-
fore, we recommend that customers minimize device exposure to aggressive substances during storage,
production, and use. Devices that showed visible discoloration when tested using the described tests above
did show no performance deviations within failure limits during the stated test duration. Respective failure
limits are described in the IEC60810.
Packing information is available on the internet (online product catalog).
For further application related informations please visit www.osram-os.com/appnotes
SFH 4545
11 Version 1.5 | 2018-08-10
Disclaimer
Disclaimer
Language english will prevail in case of any discrepancies or deviations between the two language word-
ings.
Attention please!
The information describes the type of component and shall not be considered as assured characteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may
contain dangerous substances.
For information on the types in question please contact our Sales Organization.
Ifprintedordownloaded,please󰘰ndthelatestversionintheOSRAMOSWebside.
Packing
Please use the recycling operators known to you. We can also help you – get in touch with your nearest
saleso󰘲ce.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For
packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to
invoice you for any costs incurred.
Product safety devices/applications or medical devices/applications
OSRAM OS components are not developed, constructed or tested for the application as safety relevant
component or for the application in medical devices.
In case Buyer – or Customer supplied by Buyer– considers using OSRAM OS components in product safety
devices/applications or medical devices/applications, Buyer and/or Customer has to inform the local sales
partner of OSRAM OS immediately and OSRAM OS and Buyer and /or Customer will analyze and coordi-
natethecustomer-speci󰘰crequestbetweenOSRAMOSandBuyerand/orCustomer.
SFH 4545
12 Version 1.5 | 2018-08-10
Glossary
1) Radiant intensity:MeasuredatasolidangleofΩ=0.001sr
2) Reverse Operation: Reverse Operation of 10 hours is permissible in total. Continuous reverse opera-
tion is not allowed.
3) Dimensions of active chip area: The active chip area consists of 10 single chips with 1 x 1 mm each.
4) Totalradiant󰘱ux: Measured with integrating sphere.
5) Thermal resistance:junction‐ambient,mountedonPC‐board(FR4),padsize16mm²each
6) Typical Values: Due to the special conditions of the manufacturing processes of semiconductor devic-
es,thetypicaldataorcalculatedcorrelationsoftechnicalparameterscanonlyre󰘱ectstatistical󰘰gures.
These do not necessarily correspond to the actual parameters of each single product, which could dif-
fer from the typical data and calculated correlations or the typical characteristic line. If requested, e.g.
because of technical improvements, these typ. data will be changed without any further notice.
7) Testing temperature: TA = 25°C
8) Tolerance of Measure:Unlessotherwisenotedindrawing,tolerancesarespeci󰘰edwith±0.1and
dimensionsarespeci󰘰edinmm.
SFH 4545
13 Version 1.5 | 2018-08-10
Published by OSRAM Opto Semiconductors GmbH
Leibnizstraße 4, D-93055 Regensburg
www.osram-os.com © All Rights Reserved.