KSD-O8Q005-001 1
SM2233-D
Chip LED
Features
• Colorless diffusion lens type
• Compact type
• Radiation size 2.9mm(L)×1.3mm(W) surface mount type.
Outline Dimensions unit :
mm
PIN Connections
1. Anode
2. N.C.
3. Cathode
1
S
Se
em
mi
ic
co
on
nd
du
uc
ct
to
or
r
2.40~2.60
1.20~1.40
1.80~2.00
2.80~3.00
0.50 Max.
0.50 Max.
0.20 Min.
0.90~1.10
0.10 Max.
12
KSD-O8Q005-001 2
SM2233-D
Absolute Maximum Ratings (Ta=25oC)
Characteristic Symbol Rating Unit
Power dissipation PD 63 mW
Forward current IF 25 mA
*1Peak forward current IFP 50 mA
Reverse voltage VR 4 V
Operating temperature range Topr -25∼80 ℃
Storage temperature range Tstg -30∼100 ℃
*2Soldering temperature Tsol 240℃ for 10 seconds
*1. Duty ratio = 1/16, Pulse width = 0.1ms
*2. Recommended reflow soldering temperature profile
- Preheating 150℃ to 185℃ within 120 seconds soldering 240℃ within 10 seconds
Gradual cooling (Avoid quenching)
Electrical Optical Characteristics (Ta=25oC)
Characteristic Symbol Test Condition Min Typ. Max. Unit
Forward voltage VF I
F= 20mA - 2.1 2.5 V
Luminous intensity IV IF= 20mA 17 - - mcd
Dominant wavelength λD IF= 20mA 569 572 576 nm
Spectrum bandwidth ∆λ IF= 20mA - 30 - nm
Reverse current IR VR=4V - - 10 uA
- ±55 -
*3Half angle θ1/2 IF= 20mA - ±80 - deg
*3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity
(Do not use to combine grade classification. It must be used separately grade classification)
max. 10sec
Temp (℃)
Time (sec)
185
150
240
P eak Temp max. 240℃
Preheating area
150~185℃, 90±30sec
max. 3℃/sec
25
Time from 25℃ to Peak Temperature max. 6min
Solder area
220℃, max. 60sec
max. 4℃/sec
max. -6℃/sec
240
180
150
60
0
KSD-O8Q005-001 3
SM2233-D
Characteristic Diagrams
Fig. 3 IF – Ta
Forward Current IF [mA]
Ambient Temperature Ta [℃]
Relative Intensity [%]
Wavelength λ [nm]
Forward Voltage VF [V]
Forward Current IF [mA]
Forward Current IF [mA]
Luminous Intensity Iv [mcd]
Fig.4 Spectrum Distribution
Fig. 2 IV - IF
Fig. 1 IF - VF
Fig. 5 Radiation Diagr am
Relative Luminous Intensity Iv [%]
Fig. 5-1 Radia ti on Di agram(X)
100 50 0 50 100
Relative Luminous Intensity Iv [%]
KSD-O8Q005-001 4
SM2233-D
The AUK Corp. products are intended for the use as components in g eneral electronic
equipment (Office and communication equipment, measuring equipment, home
appliance, etc.).
Please make sure that you consult with us before you use these AUK Corp. products
in equipments which require high quality and / or reliability, and in equipments which
could have major impact to the welfare of human life(atomic energy control, airplane,
spaceship, transportation, combustion control, all types of safety device, etc.).
A
UK
Corp. cannot accept liability to any damage which may occur in case these AUK Corp.
products were used in the mentioned equipments without prior consultation with AUK
Corp..
Specifications mentioned in this publication are subject to change without notice.
