Bulletin PD-21090 rev. A 05/06 12CWQ10FNPbF SCHOTTKY RECTIFIER 12 Amp IF(AV) = 12Amp VR = 100V Major Ratings and Characteristics Description/ Features Characteristics Values Units IF(AV) Rectangular 12 A VRRM 100 V IFSM @ tp = 5 s sine 330 A VF @ 6 Apk, TJ = 125C 0.65 V TJ range - 55 to 150 C waveform The 12CWQ10FNPbF surface mount, center tap, Schottky rectifier series has been designed for applications requiring low forward drop and small foot prints on PC board. Typical applications are in disk drives, switching power supplies, converters, freewheeling diodes, battery charging, and reverse battery protection. Popular D-PAK outline (per leg) Center tap configuration Small foot print, surface mountable Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Lead-Free ("PbF" suffix) Case Styles Base Common Cathode 4 2 Common 1 Cathode Anode 3 Anode D-PAK (TO-252AA) www.irf.com 1 12CWQ10FNPbF Bulletin PD-21090 rev. A 05/06 Voltage Ratings Part number 12CWQ10FNPbF V R Max. DC Reverse Voltage (V) VRWM Max. Working Peak Reverse Voltage (V) 100 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current * See Fig. 5 IFSM 12CWQ... Units (Per Leg) 6 (Per Device) 12 A Max.PeakOneCycleNon-Repetitive 330 Surge Current * See Fig. 7(Per Leg) 110 A EAS Non-Repetit. AvalancheEnergy(PerLeg) 6 mJ IAR RepetitiveAvalancheCurrent(PerLeg) 1 A Conditions 50% duty cycle @ TC = 135C, rectangular wave form Following any rated load condition and with 10ms Sine or 6ms Rect. pulse rated VRRM applied 5s Sine or 3s Rect. pulse TJ = 25 C, IAS = 1 Amps, L = 12 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM IRM 12CWQ... Units Max. Forward Voltage Drop (Per Leg) * See Fig. 1 (1) Conditions 0.80 0.95 0.65 V V V @ 6A @ 12A @ 6A 0.78 V @ 12A Max. Reverse Leakage Current 1 mA TJ = 25 C (Per Leg) * See Fig. 2 4 mA TJ = 125 C TJ = TJ max. (1) TJ = 25 C TJ = 125 C VR = rated VR VF(TO) Threshold Voltage 0.47 V rt Forward Slope Resistance 20.68 m CT Typ. Junction Capacitance (Per Leg) 183 pF VR = 5VDC, (test signal range 100Khz to 1Mhz) 25C LS Typical Series Inductance (Per Leg) 5.0 nH Measured lead to lead 5mm from package body (1) Pulse Width < 300s, Duty Cycle <2% Thermal-Mechanical Specifications Parameters 12CWQ... Units TJ Max. Junction Temperature Range (*) -55 to 150 C Tstg Max. Storage Temperature Range -55 to 150 C RthJC Max. Thermal Resistance (Per Leg) Junction to Case wt Approximate Weight Case Style dTj 2 < 1 Rth( j-a) 3.0 C/W DC operation * See Fig. 4 1.5 0.3 (0.01) g (oz.) D-Pak Marking Device (*) dPtot (PerDevice) Conditions Similar to TO-252AA 12CWQ10FN thermal runaway condition for a diode on its own heatsink www.irf.com 12CWQ10FNPbF Bulletin PD-21090 rev. A 05/06 100 Reverse Current - I R (mA) 10 100 TJ= 150C 125C 1 100C 0.1 75C 0.01 50C 0.001 25C 0.0001 0 10 20 30 40 50 60 70 80 90 100 Reverse Voltage - V R (V) Fig. 2 - Typical Values Of Reverse Current Vs. Reverse Voltage (Per Leg) TJ = 150C 1000 TJ = 125C TJ = 25C 10 1 0 0.5 1 1.5 2 2.5 Junction Capacitanc e - C T (pF) Instantaneous Forward Current - I F (A) 1000 3 TJ= 25C 100 10 3.5 0 20 40 60 80 100 Forward Voltage Drop - VFM (V) Reverse Voltage - V R(V) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) Thermal Impedance Z thJC (C/W) 10 1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM t1 0.1 t2 Notes: Single Pulse (Thermal Resistanc e) 0.01 0.00001 0.0001 0.001 1. Duty factor D = t 1/ t 2 2. Peak TJ = PDM x Z thJC+ TC 0.01 0.1 1 t 1 , Rectangular Pulse Duration (Sec onds) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) www.irf.com 3 12CWQ10FNPbF Bulletin PD-21090 rev. A 05/06 6 145 Average Power Loss - (Watts) Allowable Case Temperature - (C) 150 DC 140 135 Square wave (D = 0.50) 80% Rated V R applied 130 125 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 5 4 RMSLimit 3 DC 2 1 see note (2) 120 0 1 2 3 4 5 6 7 8 0 9 0 Average Forward Current - I F(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current (Per Leg) Non-Repetitive Surge Current - I FSM (A) 1 2 3 4 5 6 7 8 9 Average Forward Current - I F(AV) (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) 1000 At Any Rated Load Condition And With Rated V RRM Applied Following Surge 100 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) (2) Formula used: TC = TJ - (Pd + PdREV) x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6); PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1 = 80% rated VR 4 www.irf.com 12CWQ10FNPbF Bulletin PD-21090 rev. A 05/06 Outline Table Modified JEDEC outline TO-252AA Dimensions in millimeters and (inches) Part Marking Information THIS IS A 12CWQ10FN INTERNATIONAL RECTIFIER LOT CODE 8024 LOGO ASSEMBLED ON WW 02, 2000 PART NUMBER 12CWQ10FN DATE CODE P = LEAD-FREE ASSEMBLY LOT CODE www.irf.com YEAR 0 = 2000 WEEK 02 X = SITE ID 5 12CWQ10FNPbF Bulletin PD-21090 rev. A 05/06 Tape & Reel Information TR 4.1 (0.16) 3.9 (0.15) 1.85 (0.07) DIA. 1.65 (0.06) 2.1 (0.83) 1.9 (0.07) 1.85 (0.07) 1.65 (0.06) 0.35 (0.01) 0.25 (0.01) 7.6 (0.30) 7.4 (0.29) FEED DIRECTION 12.1 (0.48) 11.9 (0.47) 4.1 (0.16) 3.9 (0.15) TRR 2.1 (0.83) 1.9 (0.07) 2.6 (0.10) DIA. 1.5 (0.06) 1.85 (0.07) DIA. 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.6 (0.30) 7.4 (0.29) FEED DIRECTION 8.1 (0.32) 7.9 (0.31) 4.1 (0.16) 3.9 (0.15) TRL 2.1 (0.83) 1.9 (0.07) 2.6 (0.10) DIA. 1.5 (0.06) 1.85 (0.07) DIA. 1.65 (0.06) 1.85 (0.07) 1.65 (0.06) 7.6 (0.30) 7.4 (0.29) FEED DIRECTION 13 (0.52) DIA. 8.1 (0.32) 7.9 (0.31) 2.6 (0.10) DIA. 1.5 (0.06) 7.0 (0.28) 6.8 (0.26) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 0.35 (0.01) 0.25 (0.01) 10.6 (0.42) 10.4 (0.41) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 0.35 (0.01) 0.25 (0.01) 10.6 (0.42) 10.4 (0.41) 16.3 (0.64) 15.7 (0.62) 2.75 (0.11) 2.55 (0.10) 22.4 (0.88) TO-252AA Tape & Reel 375 (14.17) DIA. MAX. 6 50 (1.97) DIA. When ordering, indicate the part number, part orientation, and the quantity. Quantities are in multiples of 2,000 pieces per reel for TR and multiples of 3,000 pieces per reel for both TRL and TRR. www.irf.com 12CWQ10FNPbF Bulletin PD-21090 rev. A 05/06 Ordering Information Table Device Code 12 C W Q 10 1 2 3 4 5 FN TRL PbF 6 1 - Current Rating (12A) 2 - Center Tap Configuration- 3 - 7 8 Package Identifier W = D-Pak 4 4 - Schottky "Q" Series 5 - Voltage Rating (10 = 100V) 6 - FN = TO-252AA 7 - y none = Tube (50 pieces) y TR = Tape & Reel y TRL = Tape & Reel (Left Oriented) y TRR = Tape & Reel (Right Oriented) 8 - y none = Standard Production y PbF = Lead-Free Data and specifications subject to change without notice. This product has been designed and qualified for Consumer Level and Lead-Free. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 05/06 www.irf.com 7