Telecom-, Signal and RF Relays
AXICOM
Cradle Relay
Accessories and Mounting
108-98016 • Nov. 07 • Rev. C • ECOC: JM10
108-98016 Rev. C
All specications subject to change. Consult Tyco Electronics for latest specications. 2 of 11
Telecom-, Signal and RF Relays
Cradle Relay Accessories and Mounting
AXICOM
Index
Dimensions 5
General Data / Ordering Information 6
Dimensions 7
Disclaimer
While Tyco Electronics has made every reasonable effort
to ensure the accuracy of the information in this datasheet,
Tyco Electronics does not guarantee that it is error-free,
nor does Tyco Electronics make any other representati-
on, warranty or guarantee that the information is accurate,
correct, reliable or current. Tyco Electronics reserves the
right to make any adjustments to the information contai-
ned herein at any time without notice. Tyco Electronics
expressly disclaims all implied warranties (and all express
warranties, except as otherwise stated in this datasheet)
regarding the information contained herein, including but
not limited to any implied warranties or merchantability or
tness for a particular purpose. It is recommended that
you test any new or replacement product before incorpo-
rating into a system.
The dimensions in this datasheet are for reference purpo-
se only and are subject to change without notice. Speci-
cations are subject to change without notice.
108-98016 Rev. C
All specications subject to change. Consult Tyco Electronics for latest specications. 3 of 11
Telecom-, Signal and RF Relays
Cradle Relay Accessories and Mounting
AXICOM
Sockets with hand solder terminals
Size III
Size I Size II
ROHS compliant (Directive 2002/95/EC)
as per product date code 0501.
Approx. weight 3.5 g Approx. weight 4.5 g
Approx. weight 5.5 g
108-98016 Rev. C
All specications subject to change. Consult Tyco Electronics for latest specications. 4 of 11
Telecom-, Signal and RF Relays
Cradle Relay Accessories and Mounting
AXICOM
Sockets with PCB terminals
Size III
Size I Size II
ROHS compliant (Directive 2002/95/EC)
as per product date code 0501.
Approx. weight 3.5 g Approx. weight 5.5 g
Approx. weight 6.5 g
108-98016 Rev. C
All specications subject to change. Consult Tyco Electronics for latest specications. 5 of 11
Telecom-, Signal and RF Relays
Cradle Relay Accessories and Mounting
AXICOM
Dimensions Dimensions in mm
Sockets with PCB terminals
Sockets with hand solder terminals
with hold-down spring for cradle relays N, S and P
with hold-down spring for cradle relays N, S and P
with hold-down spring for cradle relay W
with hold-down spring for cradle relay W
Socket Size I Size II Size III
Dimension a 26.6 32.5 38
108-98016 Rev. C
All specications subject to change. Consult Tyco Electronics for latest specications. 6 of 11
Telecom-, Signal and RF Relays
Cradle Relay Accessories and Mounting
AXICOM
General Data
Ordering Code
Terminal material CuSn8 FB 390 plated with min. 3 μm silver or min. 1 μm gold
Socket material with solder terminals Phenolformaldehyde - type 31 (DIN 7708, part 2)
Socket material with PCB terminals Makrolon (polycarbonate)
Maximum continous current at 70 °C 5 A
Version Size Ordering Code Tyco Part Number
Sockets
for printed circuit mounting,
terminals silver-plated
with earth terminal
I
II
III
V23154-Z1001
V23154-Z1002
V23154-Z1028
1393824-1
9-1393809-1
1-1393824-0
for solder terminals,
hand solder terminals, silver-plated
I
II
III
V23154-Z1005
V23154-Z1006
V23154-Z1015
1393824-4
1393824-5
1393824-8
Hold-down springs
for cradle relays N, S and P I
II
III
V23154-Z1021
V23154-Z1022
V23154-Z1034
1393827-1
1393827-2
1393760-2
for cradle relay W I
II
V23154-Z1023
V23154-Z1024
1393827-3
1393760-1
Gold plated terminals on request
108-98016 Rev. C
All specications subject to change. Consult Tyco Electronics for latest specications. 7 of 11
Telecom-, Signal and RF Relays
Cradle Relay Accessories and Mounting
AXICOM
Dimensions Dimensions in mm
Minimum spacing between sockets
for cradle relay P
Relays oriented in the same direction
Dimension b
27
33
39
Dimension c
42
48
54
Socket
Size I
Size II
Size III
Relays oriented inversely to each other
Dimension c
27
33
39
Socket
Size I
Size II
Size III
with hold-down spring for cradle relays N, S and P
When mounting cradle relay P consideration should be given to magnetic elds. Strong DC magnetic elds, possibly
caused by adjacent relays, and large iron masses are the most common causes of interference. Experience has shown
that under normal operating conditions the minimum spacings specied for cradle relay P are sufcient to prevent cross
interference.
108-98016 Rev. C
All specications subject to change. Consult Tyco Electronics for latest specications. 8 of 11
Telecom-, Signal and RF Relays
Cradle Relay Accessories and Mounting
AXICOM
Dimensions Dimensions in mm
Mounting hole layout for cradle relays and sockets with hand solder terminals
with hold-down spring for cradle relays N, S and P
*) This hole is omitted when the mounting hole layout is intended for the socket.
Fixing of the socket
Direct mounting of relays without socket requires a xing nut M2.5 DIN 934-m6AU.
Ordering code: D00934-A0025-S001
Size I Size II Size III
AM 2.5 x ... DIN 84
(Screw length = Dimension a + 3.5 mm)
2.7 DIN 433
BM 2.5 DIN 439
Earth spring
108-98016 Rev. C
All specications subject to change. Consult Tyco Electronics for latest specications. 9 of 11
Telecom-, Signal and RF Relays
Cradle Relay Accessories and Mounting
AXICOM
Dimensions Dimensions in mm
Mounting hole layout for sockets with PCB terminals
Basic grid 2.5 mm according to EN 60097
Fixing of the socket
Size I Size II Size III
View onto the terminals M = Earth terminal
a) Hole for mechanical armature actuation, if required
b) Hole for the socket mounting with screw M1.6
AM 1.6 x ... DIN 84
(Screw length = Dimension a + 7.5 mm)
1.7 DIN 433
BM 1.6 DIN 439
108-98016 Rev. C
All specications subject to change. Consult Tyco Electronics for latest specications. 10 of 11
Telecom-, Signal and RF Relays
Cradle Relay Accessories and Mounting
AXICOM
IM Relays
4th generation slim line – low prole polarized 2 c/o telecom signal relay
with bifurcated contacts, available as non latching or latching relay with
1 coil. Nominal voltage range from 1.5 ... 24 V, coil power consumption of 50 ...
200 mW, latching relays with 1 coil 100 mW. The IM relay is available as
through hole and surface mount type (J-Legs and Gull Wings) and capable
to switch loads up to 60 W/62,5 VA. It is currently the only 2 A rated 4G
relay on the market. Dielectric strength fullls the Telcordia requirements
according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 / 160 µs).
The IM relay is tested according CECC/IECQ and certied in accordance
with IEC/EN 60950 and UL 60950.
Dimensions approx. 10 x 6 mm board space and 5.65 mm height.
P2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal voltage
range from 3 ... 24 V, coil power consumption 140 mW, latching relays
with 1 coil 70 mW. The P2 Relay is available as through hole or surface
mount type and capable to switch currents up to 5 A. Dielectric strength
fullls the Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs)
and FCC part 68 (1,5 kV – 10 / 160 µs). The P2 relay is tested according
CECC/IECQ and certied in accordance with IEC/EN 60950 and UL 60950.
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
FX2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 coil. Nominal voltage
range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the high
sensitive version, 140... 300 mW for the standard version, latching relays
with 1 coil 100 mW. The FX2 relay is available as through hole type and
capable to switch loads up to 60 W/62,5 VA. Dielectric strength fullls the
Telcordia requirements according GR 1089 (2,5 kV – 2 / 10 µs) and FCC
part 68 (1,5 kV – 10 / 160 µs). The FX2 relay is tested according CECC/
IECQ and certied in accordance with IEC/EN 60950 and UL 60950.
Dimensions approx. 15 x 7,5 mm board space and 10,7 mm height.
FT2 / FU2 Relays
3rd generation non polarized, non latching 2 c/o telecom relay with bifurca-
ted contacts. Nominal voltage range from 3 ... 48 V, coil power consumption
200 ... 300 mW. Most sensitive 48 V relay. Available as through hole and
surface mount type. Dielectric strength fullls the Telcordia requirements
according GR 1089 (2,5 kV – 2 / 10 µs) and FCC part 68 (1,5 kV – 10 /
160 µs). The FT2/FU2 relay is tested according CECC/IECQ and certied
in accordance with IEC/EN 60950 and UL 60950.
Dimensions approx. 15 x 7,5 mm board space and 10 mm height.
FP2 Relays
3rd generation polarized 2 c/o telecom relay with bifurcated contacts,
available as non latching or latching relay with 1 or 2 coils. Nominal voltage
range from 3 ... 48 V, coil power consumption of 80 ... 260 mW for the
high sensitive version, 140... 300 mW for the standard version, latching
relays with 1 coil 100 mW.. The FP2 Relay is available as through hole
type and capable to switch loads up to 60 W/62,5 VA. Dielectric strength
fullls FCC part 68 (1,5 kV – 10 / 160 µs). The FP2 is tested according
CECC/IECQ approved.
Dimensions approx. 14 x 9 mm board space and 5 mm height.
MT2
2nd generation non polarized, non latching 2 c/o telecom and si-
gnal relay with bifurcated contacts. Nominal voltage range from 3
... 48 V, coil power consumption 150/200/300/400 and 550 mW.
Dielectric strength fulfills the requirements according FCC part 68
(1,5 kV – 10 / 160 µs).
Dimensions approx. 20 x 10 mm board space and 11 mm height.
D2n Relays
2nd generation non polarized 2 c/o relay for telecom and various other ap-
plications. Nominal voltage range from 3 ... 48 V, coil power consumption from
150 .... 500 mW. The D2n relay is capable to switch currents up to 3 A. Dielectric
strength fullls the requirements according FCC part 68 (1,5 kV – 10 / 160 µs).
Dimensions approx. 20 x10 mm board space and 11 mm height.
P1 Relays
Extremely sensitive, polarized 1 c/o relay with bifurcated contacts for a
wide range of applications, available as non latching or latching relay with
1 or 2 coils. Nominal voltage range from 3 ... 24 V, coil power consumption
65 mW, latching relays with 1 coil 30 mW. The P1 relay is available as
through hole or surface mount type and capable to switch currents up to 1
A. Dielectric strength fullls the requirements according FCC part 68 (1,5
kV – 10 / 160 µs). Dimensions approx. 13 x 7,6 mm board space and 7
mm height for THT or 8 mm height for SMT version.
W11 Relays
Low cost, non polarized 1 c/o relay for various applications. Nominal
voltage range from 3 ... 24 V, coil power consumption 450 mW, sensitive
versions 200 mW. The W11 relay is capable to switch currents up to 3 A.
Dielectric strength 1000 Vrms.
Dimensions approx. 15,6 x 10,6 mm board space and 11,5 mm height.
Reed Relays
High sensitive, non polarized relay for telecom and various other applica-
tions, available with 1 n/o, 2 n/o or 1c/o contacts. Nominal voltage range
from 5 ... 24 V, coil power consumption 50...280 mW for 1 n/o and 125 ...
280 mW for 2 n/o or 1 c/o versions. Reedrelays are available in DIP or
SIL housing and capable to switch currents up to 0,5 A. Integrated diode
and/or electrostatic shield optional. Dielectric strength 1500 Vdc. Dimen-
sions approx. 19,3 x 7 mm board space and 5 ... 7,5 mm height for DIP or
19,8 x 5 mm board space and 7,8 mm height for SIL version.
Cradle Relays
Extremely reliable and mature relay family of 1st generation for various signal
switching applications. Available as non polarized, polarized / latching and
relay with AC coil. The benet is the possibility of combining various contact
sets from 1 up to 6 poles, single and bifurcated contacts, different contact
materials with a coil voltage range from 1,5 Vdc to 220 Vac. Cradle relays are
available as dust protected and hermetically sealed versions, with plug in or
solder terminals and are capable to switch currents up to 5 A. Forcibly guided
(linked) contact sets optional. Dielectric strength 500 Vrms. Dimensions from
approx. 19 x 24 to 19x35 mm board space and 30 mm height.
Other Relays
We offer a variety of different relay families for maintenance and replace-
ment purposes. These relays are up to 60 years old now, such as Card
Relay SN (V23030 series), Small General Purpose Relay (V23006 series),
Small Polarized Relay (V23063 ... V23067 and V23163 ... V23167 series).
Accessories like sockets, hold down springs, etc. optional.
High Frequency Relays
HF3 / HF3S / HF6 series RF relays offering excellent RF characteristics
in a small package. All HF series relays are suitable for SMD soldering
processes. Available as non latching or latching versions with 1 or 2 coils
and a nominal coil voltage range from 3 … 24 V, a coil power consumption
of 140 mW or 70 mW (single coil latching types).
HF3: Low cost RF relay suitable up to 3 GHz. Impedance 50 and 75 Ohm.
50 W hot switching and 50 W RF power carry capability.
Dimensions 14.6 x 7.3 x 10.3 mm.
HF3S: High performance, high power RF relay suitable up to 3 GHz,
50 W hot switching and 150 W RF power carry capability.
Dimensions 15 x 7.6 x 10.6 mm.
HF6: High performance, high power RF relay suitable up to 6 GHz,
50 W hot switching and 50 W RF power carry capability.
Dimensions 15 x 7.6 x 10.6 mm.
Telecom-, Signal and RF Relays
AXICOM
Tyco Electronics Logistics AG
Werk Axicom Au
Seestrasse 295
CH-8804 Au-Wädenswil / Switzerland
Phone +41 44 782 91 11
Fax +41 44 782 90 00
E-mail: axicom@tycoelectronics.com
Tyco Electronics
Paulsternstrasse 26
D-13629 Berlin / Germany
Phone +49 30 386 38573
Fax +49 30 386 38575
E-mail: axicom@tycoelectronics.com
Tyco Electronics EC Trutnov s.r.o.
Komenského 821
CZ-541 01 Trutnov / Czech Republic
E-mail: axicom@tycoelectronics.com
Tyco Electronics Corporation
POB 3608,
Harrisburg, PA 17105, USA
Phone +1 800-522-6752