2 2018-10-26
IRHF57230SE
JANSR2N7498T2
Pre-Irradiation
International Rectifier HiRel Products, Inc.
Thermal Resistance
Symbol Parameter Min. Typ. Max. Units
RJC Junction-to-Case ––– ––– 5.0
RJA Junction-to-Ambient (Typical Socket Mount) ––– ––– 175 °C/W
Electrical Characteristics @ Tj = 25°C (Unless Otherwise Specified)
Symbol Parameter Min. Typ. Max. Units Test Conditions
BVDSS Drain-to-Source Breakdown Voltage 200 ––– ––– V VGS = 0V, ID = 1.0mA
BVDSS/TJ Breakdown Voltage Temp. Coefficient ––– 0.26 ––– V/°C Reference to 25°C, ID = 1.0mA
RDS(on) Static Drain-to-Source On-Resistance ––– ––– 0.24 VGS = 12V, ID2 = 4.3A
VGS(th) Gate Threshold Voltage 2.5 ––– 4.5 V VDS = VGS, ID = 1.0mA
Gfs Forward Transconductance 4.2 ––– ––– S VDS = 15V, ID2 = 4.3A
IDSS Zero Gate Voltage Drain Current ––– ––– 10 µA VDS = 160V, VGS = 0V
––– ––– 25 VDS = 160V,VGS = 0V,TJ =125°C
IGSS Gate-to-Source Leakage Forward ––– ––– 100 nA VGS = 20V
Gate-to-Source Leakage Reverse ––– ––– -100 VGS = -20V
QG Total Gate Charge ––– ––– 47
nC
ID1 = 6.7A
QGS Gate-to-Source Charge ––– ––– 12 VDS = 100V
QGD Gate-to-Drain (‘Miller’) Charge ––– ––– 16 VGS = 12V
td(on) Turn-On Delay Time ––– ––– 25
ns
VDD = 100V
tr Rise Time ––– ––– 100 ID1 = 6.7A
td(off) Turn-Off Delay Time ––– ––– 35 RG = 7.5
tf Fall Time ––– ––– 40 VGS = 12V
Ls +LD Total Inductance ––– 7.0 ––– nH
Measured from Drain lead (6mm / 0.25 in
from package) to Source lead (6mm/ 0.25
in from package) with Source wire
internally bonded from Source pin to Drain
pin
Ciss Input Capacitance ––– 1014 –––
pF
VGS = 0V
Coss Output Capacitance ––– 182 ––– VDS = 25V
Crss Reverse Transfer Capacitance ––– 8.8 ––– ƒ = 1.0MHz
Source-Drain Diode Ratings and Characteristics
Symbol Parameter Min. Typ. Max. Units Test Conditions
IS Continuous Source Current (Body Diode) ––– ––– 6.7
ISM Pulsed Source Current (Body Diode) ––– ––– 26.8
VSD Diode Forward Voltage ––– ––– 1.5 V TJ = 25°C,IS = 6.7A, VGS = 0V
trr Reverse Recovery Time ––– ––– 274 ns TJ = 25°C, IF = 6.7A, VDD ≤ 25V
Qrr Reverse Recovery Charge ––– ––– 2.2 µC di/dt = 100A/µs
ton Forward Turn-On Time Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD)
A
Footnotes:
Repetitive Rating; Pulse width limited by maximum junction temperature.
VDD = 50V, starting TJ = 25°C, L = 6.6mH, Peak IL = 6.7A, VGS = 12V
ISD 6.7A, di/dt 219A/µs, VDD 200V, TJ 150°C
Pulse width 300 µs; Duty Cycle 2%
Total Dose Irradiation with VGS Bias. 12 volt VGS applied and VDS = 0 during irradiation per MIL-STD-750, Method 1019, condition A.
Total Dose Irradiation with VDS Bias. 160volt VDS applied and VGS = 0 during irradiation per MlL-STD-750, Method 1019, condition A.