Features * * * * * * Regulated Converters 2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 87% Low Profile, 10.2mm Height Over Current Protection DC/DC Converter RP08-A Description 8 Watt 3 DIP24/SMD Single & Dual Output 3Y The RP08-A series DC/DC converters are certified to UL 60950-1 and cUL 60950-1. This makes them ideal for all telecom and industrial applications where approved safety standards are required. The DIP24 package is available in both pinned and SMD case styles and meets military standards for thermal shock and vibration tolerance. wa EAR rranty Selection Guide Part Number RP08-123.3SA(3) RP08-1205SA(3) RP08-1212SA(3) RP08-1215SA(3) RP08-243.3SA(3) RP08-2405SA(3) RP08-2412SA(3) RP08-2415SA(3) RP08-483.3SA(3) RP08-4805SA(3) RP08-4812SA(3) RP08-4815SA(3) RP08-1205DA(3) RP08-1212DA(3) RP08-1215DA(3) RP08-2405DA(3) RP08-2412DA(3) RP08-2415DA(3) RP08-4805DA(3) RP08-4812DA(3) RP08-4815DA(3) Input Voltage Range [VDC] 9-18 9-18 9-18 9-18 18-36 18-36 18-36 18-36 36-75 36-75 36-75 36-75 9-18 9-18 9-18 18-36 18-36 18-36 36-75 36-75 36-75 Output Voltage [VDC] 3.3 5 12 15 3.3 5 12 15 3.3 5 12 15 5 12 15 5 12 15 5 12 15 Output Current [mA] 2000 1500 666 533 2000 1500 666 533 2000 1500 666 533 800 333 267 800 333 267 800 333 267 Input(1) Efficiency(1) Current typ. [mA] [%] 688 80 753 83 757 88 766 87 344 80 377 83 387 86 392 85 172 80 188 83 194 86 194 86 803 83 766 87 785 85 407 82 387 86 393 85 196 85 191 87 192 87 Max. Capacitive Load(2) [F] 3300 1600 350 240 3300 1600 350 240 3300 1600 350 240 1000 160 100 1000 160 100 1000 160 100 Notes: Note1: Maximum value at nominal input voltage and full load. Note2: Test by minimum Vin and constant resistor load. E196683 UL60950-1 Certified Model Numbering RP08-__ __ _A/_ Input Voltage Package(3) Output Voltage Single or Dual Ordering Examples RP08-4805SA/SMD = 48V Input, 5V Output, Single, SMD Package RP08-1205DA = 12V Input, 5V Output, Dual, DIP24 Package Notes: Note3: no suffix for standard package (DIP24), add suffix SMD" for SMD package www.recom-power.com REV.: 1/2016 PD-1 RP08-A DC/DC Converter Series Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted BASIC CHARACTERISTICS Parameter Input Voltage Range Condition Min. Typ. Max. nom. Vin = 12V nom. Vin = 24V nom. Vin = 48V 9VDVC 18VDC 36VDC 12VDC 24VDC 48VDC 18VDC 36VDC 75VDC Under Voltage Lockout (UVLO) none Input Filter Pi-Type Input Reflected Ripple Current nominal Vin and full load Input Surge Voltage Vin = 12V, 100ms max. Vin = 24V, 100ms max. Vin = 48V, 100ms max. 20mAp-p 36VDC 50VDC 100VDC Power up Remote ON/OFF Start-up time 700ms 5ms Operating Frequency Range 270kHz Minimum Load(4) full load Ripple and Noise 20MHz Bandwidth 300kHz 50mVp-p DC-DC ON Positive Logic DC-DC OFF Remote ON/OFF(5) Open or 3.0V < Vr < 12V Short or 0V < Vr < 1.2V 2.5mA DC-DC OFF Input current of Remote pin (CTRL) 330kHz 10% -0.5mA DC-DC ON +0.5mA Notes: Note4: The RP08 series requires a minimum of 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification. Note5: The ON/OFF control pin voltage is referenced to -Vin pin. RP08-1205SA Efficiency vs. Output Current Efficiency vs. Input Voltage 95 90 90 85 80 Efficiency [%] Efficiency [%] 85 75 70 65 60 55 9Vin 12Vin 18Vin 50 45 40 10 80 75 70 65 60 20 30 40 50 60 70 80 90 100 0 10 11 12 13 14 15 16 17 18 Input Voltage [VDC] Output Current [%] continued on next page PD-2 REV.: 1/2016 www.recom-power.com RP08-A DC/DC Converter Specifications Series measured at Ta = 25C, nominal input voltage, full load otherwise noted RP08-2405SA Efficiency vs. Output Current Efficiency vs. Input Voltage 90 95 90 85 80 Efficiency [%] Efficiency [%] 85 75 70 65 60 55 18Vin 24Vin 36Vin 50 45 40 10 30 20 40 50 60 70 90 80 80 75 70 65 60 100 18 20 22 24 26 28 30 32 34 36 66 72 75 Input Voltage [VDC] Output Current [%] RP08-4805SA Efficiency vs. Output Current Efficiency vs. Input Voltage 95 90 90 85 80 Efficiency [%] Efficiency [%] 85 75 70 65 60 55 36Vin 48Vin 75Vin 50 45 20 30 40 50 60 70 80 75 70 65 40 10 80 90 100 60 36 Output Current [%] 40 44 48 52 56 60 Input Voltage [VDC] REGULATIONS Parameter Condition Output Voltage Accuracy Line Voltage Regulation Load Voltage Regulation low line to high line DIP24 Single (0% to 100% load) SMD Dual (0% to 100% load) DIP24, SMD Cross Regulation Transient Response recovery time www.recom-power.com Value 1.0% max. asymmetrical 25%<>100% load 0.2% max. 0.5% 1% 1% 5% 25% load step change 200s typ. REV.: 1/2016 PD-3 RP08-A DC/DC Converter Specifications Series measured at Ta = 25C, nominal input voltage, full load otherwise noted PROTECTIONS Parameter Condition Value Short Circuit Protection (SCP) continuous, automatic recovery Over Load Protection (OLP) % of Iout rated 150% typ. DIP24 I/P to O/P I/P (O/P) to case 1.6kVDC/1 minute 1.6kVDC/1 minute SMD I/P to O/P I/P (O/P) to case 1.6kVDC/1 minute 1.0kVDC/1 minute Isolation Voltage Isolation Resistance 500VDC 1G min. Isolation Capacitance 300pF max. Notes: Note6: This power module is not internally fused. An input line fuse must always be used. ENVIRONMENTAL Parameter Condition Value without derating with derating Operating Temperature Range -40C to +80C -40C to +100C Maximum Case Temperature +100C Temperature Coefficient 0.02%/C max. Thermal Impedance Natural convection (20LFM) 20C/Watt typ. Operating Humidity non-condensing 5% - 95% RH Shock MIL-STD-810F Vibration MIL-STD-810F MIL-HDBK-217F BELLCORE TR-NWT-000332(7) MTBF 3543 x 103 hours 3165 x 10 hours Derating Graph(8) RP08-1212SA Output Power [%] 100 80 60 40 20 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] Notes: Note7: BELLCORE TR-NWT-000332. Case l: 50% Stress, Temperature at 40C (Ground fixed and controlled environment). Note8: Derating graphs are valid only for the shown part numbers. If you need detailed derating-information about a part-number not shown here please contact our technical support service at techsupportAT@recom-power.com. PD-4 REV.: 1/2016 www.recom-power.com RP08-A DC/DC Converter Series Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted SAFETY AND CERTIFICATIONS Certificate Type Report / File Number UL General Safety E196683 EMC Compliance Standard UL60950-1 1st Ed.: 2003 C22.2 No. 60950 1st. Ed.: 2003 Condition Standard / Criterion with external filter ESD Radiated Immunity Fast Transient(10) Surge Conducted Immunity EN55022, Class A or B C2 Air 8kV and Contact 6kV Fuse 10 V/m 2kV Input 1kV 10 Vr.m.s +VOUT +VIN DC C1 EN61000-4-2, Criteria A EN61000-4-3, Criteria A EN61000-4-4, Criteria A EN61000-4-5, Criteria A EN61000-4-6, Criteria A LOAD EMI Standard(9) DC Notes: -VIN Note9: The standard modues meet EMI Class A or Class B with external components, see filter suggestions below. Note10: An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5. The suggested capacitor: C3 Nippon chemi-con KY series 200F/100V. -VOUT C2 C2 Input Fuse +VOUT +VIN DC DC C1 LOAD C1 +VOUT +VIN Input LOAD Fuse COM DC LOAD EMI Filtering Class A DC -VOUT -VOUT -VIN -VIN C3 MODEL +VIN C1 1000pF/2kV C1 1206 MLCC +V RP08-24xxS_D RP08-24xxS_D/SMD DC N/A 1000pF/2kV 1206 MLCC N/A 1000pF/2kV 1206 MLCC OUT COM RP08-48xxS_D DC RP08-48xxS_D/SMD -VOUT +VOUT +VIN DC C2 DC -VOUT -VIN C4 -VIN C3 C3 Input LOAD C2 +VOUT +VIN Input DC C1 L1 Fuse +VOUT +VIN DC C1 C2 COM DC DC -VOUT -VOUT -VIN -VIN C4 Input C1 C3 RP08-12xxS_D L1 RP08-12xxS_D/SMD 4.7F/25V 1210 MLCC +VIN +VOUT DC C1 RP08-24xxS_D RP08-24xxS_D/SMD C2 6.8F/50V DC MLCC 1812 C2 C3/C4 L1 N/A 1000pF/2kV 1206 MLCC CMC :325H ref: WE 744290321 ref.: CMC-06 N/A 1000pF/2kV 1206 MLCC CMC: 325H ref: WE 744290321 ref.: CMC-06 2.2F/100V 1812 MLCC 1000pF/2kV 1206 MLCC CMC: 325H ref: WE 744290321 ref.: CMC-06 LOAD Fuse C4 COM -VOUT LOAD MODEL -VIN RP08-48xxS_D RP08-48xxS_D/SMD www.recom-power.com LOAD C3 L1 LOAD EMI Filtering Class B Fuse C3 C2/C3 4.7F/25V 1210 MLCC LOAD Input Input L1 C2 RP08-12xxS_D RP08-12xxS_D/SMD LOAD Fuse C1 Fuse LOAD C3 2.2F/100V 1812 MLCC C4 REV.: 1/2016 PD-5 RP08-A DC/DC Converter Specifications Series measured at Ta = 25C, nominal input voltage, full load otherwise noted DIMENSIONS and PHYSICAL CHARACTERISTICS Parameter Type Value Material Case Base Potting Nickel coated copper Non-conductive black plastic Epoxy (UL94-V0) DIP24 SMD 31.8 x 20.3 x 10.2mm 32.0 x 20.5 x 11.2mm DIP24 SMD 16g 18g Package Dimensions (LxWxH) Package Weight DIP Dimension Drawing (mm) 31.8 20.3 10.2 Pin Connections Pin # 3.80 5.08 O0.5 20.32 2.0 15.24 2.54 1 2 3 9 11 Bottom View 23 22 16 Single Dual 1 Ctrl Ctrl 2 -Vin -Vin 3 -Vin -Vin 9 NC Com 11 NC -Vout 14 +Vout +Vout 16 -Vout -Com 22 +Vin +Vin 23 +Vin +Vin Pin Pitch Tolerance 0.25mm Pin Dimension Tolerance 0.1mm XX.X 0.5mm XX.XX 0.25mm NC = No Connection 14 11.2 11.0 SMD Dimension Drawing (mm) 32.0 Pin Connections Pin # Pin area 1.0 x 0.50 2.54 0.50 1.60 9 10 11 12 25.4 1 2 3 4 5 20.3 20.3 25.40 Bottom View 24 23 22 21 20 Top View 2.40 10.16 2.54 Single Dual 1 Ctrl Ctrl 2 -Vin -Vin 3 -Vin -Vin 9 NC Com 11 NC -Vout 14 +Vout +Vout 16 -Vout Com 22 +Vin +Vin 23 +Vin +Vin Others NC NC Pin Pitch Tolerance 0.25mm Pin Dimension Tolerance 0.1mm XX.X 0.5mm XX.XX 0.25mm NC = No Connection 16 15 14 13 27.94 PD-6 REV.: 1/2016 www.recom-power.com RP08-A DC/DC Converter Series Specifications measured at Ta = 25C, nominal input voltage, full load otherwise noted PACKAGING INFORMATION Parameter Type Packaging Quantity Value 7pcs. Storage Temperature Range -55C to +125C Storage Humidity 5% - 95% RH The product information and specifications are subject to change without prior notice. RECOM products are not authorized for use in safety-critical applications (such as life support) without RECOM's explicit written consent. A safety-critical application is defined as an application where a failure of a RECOM product may reasonably be expected to endanger or cause loss of life, inflict bodily harm or damage property. The buyer shall indemnify and hold harmless RECOM, its affiliated companies and its representatives against any damage claims in connection with the unauthorized use of RECOM products in such safety-critical applications. www.recom-power.com REV.: 1/2016 PD-7 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: RECOM: RP08-1205DA RP08-1205DA/SMD RP08-1205SA RP08-1205SA/SMD RP08-1212DA RP08-1212DA/SMD RP081212SA RP08-1212SA/SMD RP08-1215DA RP08-1215DA/SMD RP08-1215SA RP08-1215SA/SMD RP08-123.3SA RP08-123.3SA/SMD RP08-2405DA RP08-2405DA/SMD RP08-2405SA RP08-2405SA/SMD RP08-2412DA RP082412DA/SMD RP08-2412SA RP08-2412SA/SMD RP08-2415DA RP08-2415DA/SMD RP08-2415SA RP082415SA/SMD RP08-243.3SA RP08-243.3SA/SMD RP08-4805DA RP08-4805DA/SMD RP08-4805SA RP084805SA/SMD RP08-4812DA RP08-4812DA/SMD RP08-4812SA RP08-4812SA/SMD RP08-4815DA RP084815DA/SMD RP08-4815SA RP08-4815SA/SMD RP08-483.3SA RP08-483.3SA/SMD