Issue 1 - August 2007 1 www.zetex.com
© Zetex Semiconductors plc 2007
ZXTN5551FL
160V, SOT23, NPN High voltage transistor
Summary
BVCEO > 160V
BVEBO > 6V
IC(cont) = 600mA
PD = 330mW
Complementary part number ZXTP5401FL
Description
A high voltage NPN transistor in a small outline surface mount package.
Features
•160V rating
SOT23 package
Applications
High voltage amplification
Ordering information
Device marking
N51
Device Reel size
(inches)
Tape width
(mm)
Quantity
per reel
ZXTN5551FLTA 7 8 3000
C
E
B
C
E
B
Pinout - top view
ZXTN5551FL
Issue 1 - August 2007 2 www.zetex.com
© Zetex Semiconductors plc 2007
Absolute maximum ratings
NOTES:
(a) For a device surface mounted on 25mm x 25mm x 1.6mm FR4 PCB with high coverage of single sided 1oz copper, in
still air conditions.
Parameter Symbol Limit Unit
Collector-base voltage VCBO 180 V
Collector-emitter voltage VCEO 160 V
Emitter-base voltage VEBO 6V
Continuous collector current(a) IC600 mA
Power dissipation at Tamb =25°C(a) PD 330 mW
Linear derating factor 2.64 mW/°C
Operating and storage temperature range Tj, Tstg -55 to 150 °C
Thermal resistance
Parameter Symbol Limit Unit
Junction to ambient(a) RJA 379 °C/W
ZXTN5551FL
Issue 1 - August 2007 3 www.zetex.com
© Zetex Semiconductors plc 2007
Electrical characteristics (at Tamb = 25°C unless otherwise stated)
Parameter Symbol Min. Typ. Max. Unit Conditions
Collector-base breakdown
voltage
BVCBO 180 270 V IC = 100A
Collector-emitter
breakdown voltage (base
open)
BVCEO 160 200 V IC = 1mA (*)
NOTES:
(*) Measured under pulsed conditions. Pulse width 300s; duty cycle 2%.
Emitter-base breakdown
voltage
BVEBO 67.85 VI
E = 10A
Collector cut-off current ICBO <1 50 nA VCB = 120V
50 AV
CB = 120V, Tamb= 100°C
Collector-emitter saturation
voltage
VCE(sat) 65 150 V IC = 10mA, IB = 1mA(*)
115 200 V IC = 50mA, IB = 5mA(*)
Base-emitter saturation
voltage
VBE(sat) 760 1000 mV IC = 10mA, IB = 1mA(*)
840 1200 mV IC = 50mA, IB = 5mA(*)
Static forward current
transfer ratio
hFE 80 135 IC = 1mA, VCE = 5V(*)
80 145 250 IC = 10mA, VCE = 5V(*)
30 65 IC = 50mA, VCE = 5V(*)
Transition frequency fT130 MHz IC = 10mA, VCE = 10V,
f = 100MHz
Output capacitance COBO 6pF
VCB = 10V, f = 1MHz(*)
Small signal hFE 50 260 IC = 10mA, VCE = 10V,
f=1kHz (†)
(†) Periodic sample test only
Delay time t(d) 95 ns VCC = 10V, IC = 10mA, IB1 =
IB2= 1mA
Rise time t(r) 64 ns
Storage time t(s) 1256 ns
Fall time t(f) 140 ns
ZXTN5551FL
Issue 1 - August 2007 4 www.zetex.com
© Zetex Semiconductors plc 2007
Typical characteristics
ZXTN5551FL
Issue 1 - August 2007 5 www.zetex.com
© Zetex Semiconductors plc 2007
Intentionally left blank
ZXTN5551FL
Issue 1 - August 2007 6 www.zetex.com
© Zetex Semiconductors plc 2007
Intentionally left blank
ZXTN5551FL
Issue 1 - August 2007 7 www.zetex.com
© Zetex Semiconductors plc 2007
Package outline - SOT23
Note: Controlling dimensions are in millimeters. Approximate dimensions are provided in inches
Dim. Millimeters Inches Dim. Millimeters Inches
Min. Max. Min. Max. Min. Max. Min. Max.
A - 1.12 - 0.044 e1 1.90 NOM 0.075 NOM
A1 0.01 0.10 0.0004 0.004 E 2.10 2.64 0.083 0.104
b 0.30 0.50 0.012 0.020 E1 1.20 1.40 0.047 0.055
c 0.085 0.20 0.003 0.008 L 0.25 0.60 0.0098 0.0236
D 2.80 3.04 0.110 0.120 L1 0.45 0.62 0.018 0.024
e0.95 NOM0.037 NOM-----
E
e
L
e1
D
A
c
E1
L1
A1
b
3 leads
ZXTN5551FL
Issue 1 - August 2007 8 www.zetex.com
© Zetex Semiconductors plc 2007
Zetex sales offices
Europe
Zetex GmbH
Kustermann-park
Balanstraße 59
D-81541 München
Germany
Telefon: (49) 89 45 49 49 0
Fax: (49) 89 45 49 49 49
europe.sales@zetex.com
Americas
Zetex Inc
700 Veterans Memorial Highway
Hauppauge, NY 11788
USA
Telephone: (1) 631 360 2222
Fax: (1) 631 360 8222
usa.sales@zetex.com
Asia Pacific
Zetex (Asia Ltd)
3701-04 Metroplaza Tower 1
Hing Fong Road, Kwai Fong
Hong Kong
Telephone: (852) 26100 611
Fax: (852) 24250 494
asia.sales@zetex.com
Corporate Headquarters
Zetex Semiconductors plc
Zetex Technology Park, Chadderton
Oldham, OL9 9LL
United Kingdom
Telephone: (44) 161 622 4444
Fax: (44) 161 622 4446
hq@zetex.com
© 2007 Published by Zetex Semiconductors plc
Definitions
Product change
Zetex Semiconductors reserves the right to alter, without notice, specifications, design, price or conditions of supply of any product or
service. Customers are solely responsible for obtaining the latest relevant information before placing orders.
Applications disclaimer
The circuits in this design/application note are offered as design ideas. It is the responsibility of the user to ensure that the circuit is fit for
the user’s application and meets with the user’s requirements. No representation or warranty is given and no liability whatsoever is
assumed by Zetex with respect to the accuracy or use of such information, or infringement of patents or other intellectual property rights
arising from such use or otherwise. Zetex does not assume any legal responsibility or will not be held legally liable (whether in contract,
tort (including negligence), breach of statutory duty, restriction or otherwise) for any damages, loss of profit, business, contract,
opportunity or consequential loss in the use of these circuit applications, under any circumstances.
Life support
Zetex products are specifically not authorized for use as critical components in life support devices or systems without the express written
approval of the Chief Executive Officer of Zetex Semiconductors plc. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body
or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to
cause the failure of the life support device or to affect its safety or effectiveness.
Reproduction
The product specifications contained in this publication are issued to provide outline information only which (unless agreed by the
company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a
representation relating to the products or services concerned.
Terms and Conditions
All products are sold subjects to Zetex’ terms and conditions of sale, and this disclaimer (save in the event of a conflict between the two
when the terms of the contract shall prevail) according to region, supplied at the time of order acknowledgement.
For the latest information on technology, delivery terms and conditions and prices, please contact your nearest Zetex sales office.
Quality of product
Zetex is an ISO 9001 and TS16949 certified semiconductor manufacturer.
To ensure quality of service and products we strongly advise the purchase of parts directly from Zetex Semiconductors or one of our
regionally authorized distributors. For a complete listing of authorized distributors please visit: www.zetex.com/salesnetwork
Zetex Semiconductors does not warrant or accept any liability whatsoever in respect of any parts purchased through unauthorized sales channels.
ESD (Electrostatic discharge)
Semiconductor devices are susceptible to damage by ESD. Suitable precautions should be taken when handling and transporting devices.
The possible damage to devices depends on the circumstances of the handling and transporting, and the nature of the device. The extent
of damage can vary from immediate functional or parametric malfunction to degradation of function or performance in use over time.
Devices suspected of being affected should be replaced.
Green compliance
Zetex Semiconductors is committed to environmental excellence in all aspects of its operations which includes meeting or exceeding reg-
ulatory requirements with respect to the use of hazardous substances. Numerous successful programs have been implemented to reduce
the use of hazardous substances and/or emissions.
All Zetex components are compliant with the RoHS directive, and through this it is supporting its customers in their compliance with
WEEE and ELV directives.
Product status key:
“Preview” Future device intended for production at some point. Samples may be available
“Active” Product status recommended for new designs
“Last time buy (LTB)” Device will be discontinued and last time buy period and delivery is in effect
“Not recommended for new designs”
Device is still in production to support existing designs and production
“Obsolete” Production has been discontinued
Datasheet status key:
“Draft version” This term denotes a very early datasheet version and contains highly provisional information, which
may change in any manner without notice.
“Provisional version” This term denotes a pre-release datasheet. It provides a clear indication of anticipated performance.
However, changes to the test conditions and specifications may occur, at any time and without notice.
“Issue” This term denotes an issued datasheet containing finalized specifications. However, changes to
specifications may occur, at any time and without notice.