APEM www.apem.com B2-125
CP series
Capacitive switches
Distinctive features and specifications
B2
ENVIRONMENTAL SPECIFICATIONS
• Sealing : IP68 and IP69K according to IEC 60529
• Triggered by flowing water
• Impact resistance : IK10
• Operating temperature : -20°C to +65°C
• ESD : complies with EN61000-4-2 (extended) ± 8KV (20 contacts)
and ± 15KV (20 air discharges)
ELECTRICAL AND GENERAL SPECIFICATIONS
• Max. current/voltage rating : 200mA 24VDC
• Supply voltage : 5VDC, 12VDC or 24VDC
• Life expectancy : 50 million cycles
• Power consumption non-illuminated : 7mA
• Power consumption illuminated : 25mA
• Operating force : 0N
• LED state for output image option :
1 LED : the LED is ON when the output is closed.
2 LEDs : first colour is ON when the output is open. Second colour is ON
when the output is closed.
• Output type : NPN
MATERIALS
• Case : aluminium, anodized
• Multi-wire leads section 0,22 mm2
length 300 mm
• Cable, length 300 mm, section
depending on switch model
• Connector : HE14 6V compatible
with AMP/TYCO281839-3
ADJUSTABLE SENSITIVITY
Connection to ground by means of the
yellow wire increases sensitivity
(momentary version only).
❑Activated by the touch of a finger
Even with surgeon gloves
❑50 million cycles
❑Auto-calibration function
❑Bushing diameter 16, 19 or 22 mm
❑Momentary or latching
This switch should not be used
in safety applications.
OFF-ON
Wiring diagrams
OFF-MOM
Non-illuminated 1 LED 2 LEDs
Output indicator Independent Output indicator Independent
Legend
R red +V
Black black GND
W white output
Y yellow sensitivity
G green -LED 1
Blue blue -LED2
Wire colours may vary.
Always refer to the label
on the switch.
Wiring for switch connector
Pin 1 : GND Pin 4 : LED 2
Pin 2 : output Pin 5 : sensitivity
Pin 3 : +V Pin 6 : LED 1
Blue
Black
Black
Black Black
Black
Black
Black
BlackBlack GG
RW
W
R
W
R
RWW
R
RW
RW
W
R
RW
W
R
Black
Y
GBlue G
Y
YY
Y
Chamfer
4
1
5
6
2
3
20-Serie CP-A_08-Serie IP-A 31/10/14 08:56 Page125
UG1410A
B2-126 APEMwww.apem.com
CP series
Capacitive switches
Overview
B2
CP 000
SERIES
Terminals
1Flying leads
2Cable
3Connector
Colours / Materials
0 Natural anodized
1Blue anodized
2 Black anodized
3Green anodized
5Gold anodized
6Red anodized
Electrical functions
1OFF - MOM
2OFF - ON
Bushing diameters
B1 16 mm (.630)
B2 19 mm (.748)
B3 22 mm (.866)
LED colours
Blank Non-illum.
0B Blue *
0G Green *
0S Red
0Y Amber
GS Green/red *
* For 12VDC and
24VDC models only
LED functions
SIndependent
COutput indicator
Types of illumination/
voltage
0Non-illuminated - 5VDC
1Non-illuminated - 12VDC
2Non-illuminated - 24VDC
AStandard ring - 5VDC
NStandard ring - 12VDC
KStandard ring - 24VDC
CThin ring - 5VDC
DThin ring - 12VDC
EThin ring - 24VDC
FLarge ring - 5VDC
GLarge ring - 12VDC
HLarge ring - 24VDC
A, N, K for dia. 16 & 19 only
C, D, E, F, G, H for dia 22 only
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
On request
• Duration of activation 15 minutes for latching models (standard duration is infinite)
• Different lengths, gauges or colours for flying lead terminals
• Different cable lengths
Packaging unit : 20 pieces
Dimensions : first dimensions are in mm while inches are shown as bracketed numbers.
The company reserves the right to change specifications without notice.
20-Serie CP-A_08-Serie IP-A 31/10/14 08:56 Page126
APEM www.apem.com B2-127
CP series
Capacitive switches
Illuminated or non-illuminated
B2
Ø22.20
(.874 DIA)
(.756 DIA)
Ø19.20
Ø16.20
(.637 DIA)
MODEL
STRUCTURE
Shown with flying lead terminals
Bushing Ø 16 mm (.630) - standard ring
Momentary
CPB11 OFF - MOM
Latching
CPB12 OFF - ON
(.708DIA)
Ø18.00
(.177)
4.50
(.047)
0.22mm
27.00
(1.062)
(.630DIAx1.00 IS)
Ø16.00x1.00 SI
11.70
(.460)
21.20
Ø13.50
(.531DIA)
CPB1110000NGSC
Bushing Ø 19 mm (.748) - standard ring
Momentary
CPB21 OFF - MOM
Latching
CPB22 OFF - ON
Ø22.00
(.866DIA)
(.118)
3.00
(.047)
1.20
0.22mm
27.00
(1.062)
Ø19.00x1.00 SI
(.748 DIAx1.00 IS)
6.70
(.263 )
2
(.531DIA)
Ø13.50
CPB2110000NGSC
Bushing Ø 22 mm (.866) - large or thin ring
Momentary
CPB31 OFF - MOM
Latching
CPB32 OFF - ON
2.00
(.079)
30°
(.177)
(1.102DIA)
Ø28.00
4.50
2
0.22mm
2.40
(.094)
(1.062)
27.00
(.709DIA)
Ø18.00
4.70
(.185)
(.866DIAx1.00 IS)
Ø22.00x1.00 SI
10.50
(.413)
Ø13.50
(.531DIA)
CPB3210000GGSC
20-Serie CP-A_08-Serie IP-A 31/10/14 08:56 Page127
B2-128 APEMwww.apem.com
B2
CP series
Capacitive switches
Options
CASE COLOURS /MATERIALS
000
TERMINALS
000
0 Natural anodized aluminium
1Blue anodized aluminium
2 Black anodised aluminium
Code Colour
3Green anodized aluminium
5Gold anodized aluminium
6Red anodised aluminium
Code Colour
TYPES OF ILLUMINATION
000
5VDC 12VDC
Standard ring (Ø 16 & 19 only)
Thin ring (Ø 22 only)
Large ring (Ø 22 only)
A N
24VDC
K
C D E
F G H
LED COLOURS
000
Blank Non-illuminated
0B : blue - 0G : green - 0S : red - 0Y : amber - GS : green/red
Blue, green and green/red LEDs available on 12VDC and 24VDC models only.
LED FUNCTIONS
000
SIndependent
COutput indicator
1Flying leads
2Cable
3Connector HE14 6V (see opposite)
Non-illuminated 012
(.300)
9.90
(.389) 7.62
7.62
(.300)
20-Serie CP-A_08-Serie IP-A 31/10/14 08:56 Page128
