(R) CD43__90C Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 http://www.pwrx.com TM POW-R-BLOK Dual SCR Isolated Module 90 Amperes / Up to 1800 Volts BB Description: Powerex Dual SCR Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. Features: Electrically Isolated Heatsinking Compression Bonded for Increased Power Cycling Capability Low Thermal Impedance for Improved Current Capability RoHS Compliant UL Recognized (E78240) Benefits: No Additional Insulation Components Required Easy Installation No Clamping Components Required Reduce Engineering Time Applications: CD43__90C Outline Dimensions CD43__90C Dual SCR Isolated TM POW-R-BLOK Module 90 Amperes / Up to 1800 Volts Dimension Inches Millimeters A 3.62 92 B 0.83 21 C 3.15 80 D 1.18 30 Ordering Information: F 0.83 21 G 0.79 20 H 0.79 20 K 0.24 6.2 Select the complete nine digit module part number from the table below. Example: CD431690C is a 1600Volt, 90 Ampere Dual SCR Isolated TM POW-R-BLOK Module 16 L 0.63 M 0.51 13 N 0.33 8.5 S 0.11 x .02 2.8 x 0.5 U M5 M5 Type Voltage Current Volts Amperes (x100) Bridge Circuits AC & DC Motor Drives Battery Supplies Power Supplies Large IGBT Circuit Front Ends Lighting Control Heat & Temperature Control Welders Version Note: Dimensions are for reference only. CD43 08 12 14 16 18 90 C Revision Date: 04/25/2013 (R) CD43__90C Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 http://www.pwrx.com TM POW-R-BLOK Dual SCR Isolated Module 90 Amperes / Up to 1800 Volts Absolute Maximum Ratings Characteristics Conditions Symbol Units Repetitive Peak Forward and Reverse Blocking Voltage VDRM & VRRM up to 1800 V Non-Repetitive Peak Reverse Blocking Voltage (t < 5 msec) VRSM VRRM + 100 V 180 Conduction, TC=85C IT(RMS) 141 A RMS Forward Current Average Forward Current 180 Conduction, TC=85C IT(AV) 90 A Peak One Cycle Surge Current, Non-Repetitive 50 Hz, 60% VRRM reapplied, Tj=125C ITSM 2000 A I2t for Fusing for One Cycle, 10 milliseconds 50 Hz, 60% VRRM reapplied, Tj=125C I2t 20,400 A2 sec Maximum Rate-of-Rise of On-State Current, (Repetitive) Operating Temperature Tj=125C di/dt 100 A/s TJ -40 to +125 C Tstg -40 to +125 C 35 4 53 6 160 5.64 in.-Lb. Nm in.-Lb. Nm g oz. 2500 V Storage Temperature Max. Mounting Torque, M5 Mounting Screw on Terminals Max. Mounting Torque, Module to Heatsink Module Weight, Typical V Isolation @ 25C 50 - 60 Hz, 1 minute Vrms Information presented is based upon manufacturers testing and projected capabilities. This information is subject to change without notice. The manufacturer makes no claim as to the suitability of use, reliability, capability, or future availability of this product. Revision Date: 04/25/2013 (R) CD43__90C Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 http://www.pwrx.com TM POW-R-BLOK Dual SCR Isolated Module 90 Amperes / Up to 1800 Volts Electrical Characteristics, TJ=25C unless otherwise specified Characteristics Symbol Test Conditions IDRM Up to VDRM, TJ=125C Repetitive Peak Reverse Leakage Current IRRM Peak On-State Voltage V TM Threshold Voltage, Low-level Slope Resistance, Low-level Minimum dV/dt Repetitive Peak Forward Leakage Current Min. Max. Units 10 mA Up to VRRM, TJ=125C 10 mA ITM =270A 1.90 V V(TO)1 rT1 TJ = 125C, I = 16.7% x IT(AV) to IT(AV) 0.8 3.01 V m dV/dt Tj=125C, VDM= 0.67 VDRM Gate Trigger Current IGT Tj= 25C, VD=12V, IA= 1 A 30 100 mA Gate Trigger Voltage VGT Tj= 25C, VD=12V, IA= 1 A 0.75 2.5 Volts Holding Current IH Tj= 25C, VD=12V, IA= 1 A 20 100 mA 800 V/s Thermal Characteristics Characteristics Symbol Max. Units Thermal Resistance, Junction to Case DC Operation RJ-C Per Junction, both conducting 0.28 C/W Thermal Resistance, Case to Sink Lubricated RC-S Per Module 0.15 C/W Revision Date: 04/25/2013 (R) CD43__90C TM POW-R-BLOK Dual SCR Isolated Module 90 Amperes / Up to 1800 Volts Powerex, Inc., 173 Pavilion Lane, Youngwood, Pennsylvania 15697 (724) 925-7272 http://www.pwrx.com Maximum On-State Forward Voltage Drop Maximum Transient Thermal Impedance (Junction to Case) ( Tj = 125 C ) 0.3 Thermal Impedance - Rjc - C/W On-State Voltage - Vtm - Volts 5 4 3 2 0.25 0.2 0.15 0.1 1 0.05 0 10 100 1000 0 0.001 10000 0.01 0.1 Instantaneous On-State Current - Itm - Amperes (Sinusoidal Waveform) 100 (Sinusoidal Waveform) 140 130 180 120 120 90 Max. Case Temperature - Tcase - C Maximum Power Dissipation Per SCR - Watts 10 Maximum Allowable Case Temperature Maximum On-State Power Dissipation 60 100 30 15 80 60 40 20 0 120 110 15 100 30 60 90 90 120 180 80 70 0 20 40 60 80 100 0 10 20 30 40 50 60 70 80 Average On-State Current - It(av) - Amperes Average On-State Current - It(av) - Amperes Maximum On-State Power Dissipation Maximum Allowable Case Temperature (Rectangular Waveform) 90 100 (Rectangular Waveform) 200 130 360 180 Max. Case Temperature - Tcase - C Maximum Power Dissipation Per SCR - Watts 1 Time - t - Seconds 270 160 180 140 120 90 120 60 30 100 15 80 60 40 120 110 100 90 80 30 60 90 120 180 270 15 70 360 (DC) 20 0 60 0 20 40 60 80 100 120 Average On-State Current - It(av) - Amperes 140 160 0 20 40 60 80 100 120 140 Average On-State Current - It(av) - Amperes Revision Date: 04/25/2013 160