Transient Voltage Suppressors IA\/)X TransGuard Axial Lead HOW TO ORDER V A 1000 03 D 100 R QO @ @6 @ Product Designator: V = Varistor (TransGuard) @ Case Designator: A = Axial @ Case Size Designator us, @ Working Voltage: " Where: 03 = 3.3VDC; 26 = 26.0VDC; Lead a Length 05=5.6VDC; 30 = 30.0VDC; Min. 14 = 14.0VDC; 48 = 48.0VDC; 18 = 18.0VDC; 60 = 60.0VDC Lead Diameter Energy: VA1000 VA2000 Where: A=0.1J; D=0.4J; G=0.9J; K = 2.0J; Body Length (L) = 4.32mm. 4.83mm B=0.2J; E=0.6J; H=1.2J; V=0.02J; (170" Max.) (.190" Max.) C=0.3J; F=0.7J; J=1.5d; X= 0.05J Body Diameter (0) = 2.54mm 3.56mm Max. Clamping Voltage: (.100" Max.) (140) Where: 100=10.0V; 300 = 30.0V; Lead Diameter 0.51 + .05mm 0.51 + 05mm 101 = 100.0V; 400 = 40.0V; (020 + .002) (020 + .002) 121 =120.V; 580 = 58.0V; Lead Length 25.4mm 25.4mm 150 =15.5V; 650 = 65.0V2 (1" Min.) (1" Min.) @ Standard Packaging (Pcs/Reel): Style D R T VA1000 1,000 3,000 7,500 . . VA2000 1,000 2,500 5,000 Axial Leaded Devices AVX Part Number | Working Voltage | Breakdown Veltage | Clamping Voltage | Peak Current | Transient Energy | Capacitance Inductance Symbol Vw V5 Vo Tpeak Enns C L Units (max) Volts (max) (ras) (max) Wp! (ye Test Condition <50NA 1mA DC 8/20)S+ 8/20ys 10/1000p8 ; eens di/dt = 100mA/nS VA100003A 100 3.3 4.1 ~6.0 10 40 0.1 1500 1100 3.5 A100003D100 3.3 3.7 ~ 5.6 10 150 0.4 4700 3800 3.5 A100005A150 56 7.6 ~9.3 15.5 40 0.1 1000 | 750 35 A100005D150 66 71-87 155 460 0.4 2800 | 2150 35 VA100014A300 14 16.5 ~ 20.3 30 40 0.1 400 300 3.5 'A100014D300 4 15.9 ~ 19.4 30 150 04 7200 | 900 35 VA100018A400 18 22.9 ~ 28.0 40 40 0.4 350 270 3.5 VA100018D400 18 22.6 ~ 27.5 40 150 0.4 900 700 3.5 A100026D580 26 30.5 ~ 37.3 58 120 04 700 | 580 35 A100030D650 30 36.0 ~ 45.0 65 120 04 600 | 500 35 101 48 56.0 ~ 68.0 100 100 0.4 200 | 165 3.5 VA200060K121 60 67.0 ~ 83.0 120 300 2.0 400 340 3.5 Vwa--Maximum steady-state DC operating voltage the varistor can maintain and not exceed S50uA leakage current V,Voltage across the device measured at 1mA DC current V-Maximum peak voitage across the varistor measured at a specified pulse current and waveform tTransient Energy Rating Pulse Current & Waveform 1 Joule 2A8/20uS. .2-.3 Joules 5A 8/20uS 2.4Joules 10A 8/20pS | peaxMaximum peak current which may be applied with the specified waveform without device failure EjansMaximum energy which may be dissipated with the specific waveform without device failure CDevice capacitance measured with zero volt bias at .5Vrms and 1kHz LDevice inductance measured with a current edge rate of 100mA/nS Dimensions: Millimeters (Inches) Additional information on this product is available from AVXs catalog or AVX's FAX Service. Call 1-800-879-1613 and request document #107. Visit our website http://www.avxcorp.com INVA 107