ZPD CONNECTOR Emboss Emboss Tape Tape 1.5 1.5 mm mm pitch/Disconnectable pitch/Disconnectable Crimp Crimp style style connectors connectors ZPD CONNECTOR Secure locking structure Low insertion force Suction area for picking up Improvement of engagement with prying Specifications * Current rating: 2 A/ 10 to 30 circuits AC/DC (AWG #24) 1.5 A/ 32 to 40 circuits AC/DC (AWG #24) * Voltage rating: 100 V AC/DC * Temperature range:-25 to +85 (including temperature rise in applying electrical current) * Contact resistance: Initial value/ 30 m max. After environmental tests/ 60 m max. * Insulation resistance: 500 M min. * Withstanding voltage: 500 VAC/minute * Applicable wire:Conductor size/ AWG #28 to #24 Insulation O.D./ 0.76 to 1.2 mm In order to correspond to the high-density PC board designing, this ZPD connector is designed as 1.5 mm pitch double row type connector with secure locking device. Low insertion force is realized and good mating feeling is also prepared, and these provide the certain mating operation. *In using the products,refer to "Handling Precautions for Terminals and Connectors" described on our website (Technical documents of Product information page). *RoHS2 compliance *Dimensional unit: mm * Contact JST for details. PC board layout and Assembly layout 10.1 C0.1 0.05 1.7 10.1 Circuit No.N-1 Circuit No.2 Circuit No.N 0.05 0.05 0.7 1.5 0.05 A (Mating side) Note:1 . The above figure is the figure viewed from the connector mounting side. 2. Tolerances are non-cumulative: 0.05 mm for all centers. 3. The dimensions above should serve as a guideline. Contact JST for details. 1 (10.5) (9.2) Circuit No.1 0.1 8.95 Circuit No.2 Circuit No.1 Connector outline 8.3 Circuit No.N Circuit No.N-1 (8.6) (9.5) 1.50.05 0.1 2.80.1 0.7 3.5 0.05 0.05 1.70.05 A0.05 Connector outline 1.70.05 Side entry type 1.70.05 Top entry type ZPD CONNECTOR Contact Applicable wire AWG # mm2 Model No. SZPD-002T-P0.3 6.6 2.9 3.15 0.080.21 Insulation O.D. (mm) Q'ty/ reel 0.761.2 16,000 2824 ZPD CONNECTOR Material and Finish 1 Copper alloy, tin-plated (reflow treatment) 1.07 RoHS2 compliance Contact Crimping machine Crimp applicator SZPD-002T-P0.3 AP-K2N MKS-L Applicator Dies Crimp applicator with dies MK/SZE-002-03 APLMK SZE002-03 Note: Contact JST for fully automatic crimping applicator. Housing No. of circuits <10 circuits> B 8.6 10 Circuit No.1 mark 12 14 7.6 16 18 20 22 1.5 24 A 26 28 30 <12 to 24 circuits> 32 B 34 8.6 Circuit No.1 mark 36 38 ZPDR-10V-S ZPDR-12V-S ZPDR-14V-S ZPDR-16V-S ZPDR-18V-S ZPDR-20V-S ZPDR-22V-S ZPDR-24V-S ZPDR-26V-S ZPDR-28V-S ZPDR-30V-S ZPDR-32V-1-Z ZPDR-34V-1-Z ZPDR-36V-1-Z ZPDR-38V-1-Z ZPDR-40V-1-Z 7.6 40 Model No. Dimensions (mm) A B 6.0 7.5 9.0 10.5 12.0 13.5 15.0 16.5 18.0 19.5 21.0 22.5 24.0 25.5 27.0 28.5 Q'ty/ bag 11.2 1,000 12.7 1,000 14.2 1,000 15.7 1,000 17.2 1,000 18.7 1,000 20.2 1,000 21.7 1,000 23.2 1,000 24.7 500 26.2 500 27.7 500 29.2 500 30.7 500 32.2 500 33.7 500 Material and Finish PBT, UL94V-0, natural (10 to 30 circuits), ivory (32 to 40 circuits) 1.5 RoHS2 compliance A As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. <26 to 30 circuits> B ex. 8.6 Circuit No.1 mark ZPDR-10V-S10 to 30 circuits 7.6 32 to 40 circuits S...natural Z...ivory MG...moss green TR...tomato red DPK...dark pink E...blue Z...ivory K...black 1.5 A <32 to 40 circuits> B 8.6 7.6 Circuit No.1 mark 1.5 A 2 ZPD CONNECTOR Header Top entry type Side entry type <10 circuits> <10 circuits> 1.5 A No. of circuits 7.4 1 1 A <32 to 40 circuits> B 7.4 Circuit No.1 mark Circuit No.1 mark 1 1 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 BM12B-ZPDSS-TF B B 14 BM14B-ZPDSS-TF Circuit No.1 mark Circuit No.1 mark 16 BM16B-ZPDSS-TF 18 BM18B-ZPDSS-TF 20 BM20B-ZPDSS-TF 22 BM22B-ZPDSS-TF 24 BM24B-ZPDSS-TF 26 BM26B-ZPDSS-TF 1.5 1.5 28 BM28B-ZPDSS-TF A A 30 BM30B-ZPDZS-TF 32 BM32B-ZPDZS-TF 34 BM34B-ZPDZS-TF <3236to 40 circuits> BM36B-ZPDZS-TF B 38 BM38B-ZPDZS-TF B Circuit BM40B-ZPDZS-TF No.1 mark 40 Circuit No.1 mark Side entry type BM10B-ZPDSS-TF BM12B-ZPDSS-TF BM14B-ZPDSS-TF BM16B-ZPDSS-TF BM18B-ZPDSS-TF BM20B-ZPDSS-TF BM22B-ZPDSS-TF BM24B-ZPDSS-TF BM26B-ZPDSS-TF BM28B-ZPDSS-TF BM30B-ZPDZS-TF BM32B-ZPDZS-TF BM34B-ZPDZS-TF BM36B-ZPDZS-TF BM38B-ZPDZS-TF BM40B-ZPDZS-TF Dimensions (mm) C A B Q'ty/ reel 7.5 6.0 9.0 10.5 12.0 13.5 15.0 16.5 18.0 19.5 21.0 22.5 24.0 25.5 27.0 28.5 11.2 9.2 1,000 12.7 10.7 1,000 14.2 12.2 1,000 15.7 13.7 1,000 17.2 15.2 1,000 18.7 16.7 1,000 20.2 18.2 1,000 21.7 19.7 1,000 23.2 21.2 1,000 24.7 22.7 1,000 26.2 24.2 1,000 27.7 25.7 1,000 29.2 27.2 1,000 30.7 28.7 1,000 32.2 30.2 1,000 33.7 31.7 1,000 No. of circuits 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 Model No. SM10B-ZPDSS-TF SM12B-ZPDSS-TF SM14B-ZPDSS-TF SM16B-ZPDSS-TF SM18B-ZPDSS-TF SM20B-ZPDSS-TF SM22B-ZPDSS-TF SM24B-ZPDSS-TF SM26B-ZPDSS-TF SM28B-ZPDSS-TF SM30B-ZPDSS-TF SM32B-ZPDZS-TF SM34B-ZPDZS-TF SM36B-ZPDZS-TF SM38B-ZPDZS-TF SM40B-ZPDZS-TF (8) 1,000 1,000 15.7 13.7 1,000 17.2 15.2 1,000 18.7 16.7 1,000 18.2 1,000 16.5 20.2 21.7 19.7 1,000 23.2 21.2 1,000 24.7 22.7 1,000 26.2 24.2 1,000 27.7 25.7 1,000 29.2 27.2 1,000 10.5 12.0 13.5 15.0 18.0 19.5 21.0 22.5 24.0 25.5 27.0 28.5 30.7 28.7 6.7 32.20.3 6.730.2 0.3 33.7 31.7 1,000 1,000 0.6 1,000 0.6 1,000 RoHS2 compliance This product displays (LF)(SN) on a label. The products listed above are supplied on embossed-tape. 7.85 (8) Dimensions (mm) A B 6.0 7.5 9.0 10.5 12.0 13.5 15.0 16.5 18.0 19.5 21.0 22.5 24.0 25.5 27.0 28.5 Q'ty/ reel 11.2 700 12.7 700 14.2 700 15.7 700 17.2 700 18.7 700 20.2 700 21.7 700 23.2 700 24.7 700 26.2 700 27.7 700 29.2 700 30.7 700 32.2 700 33.7 700 Material and Finish Material and Finish Contact: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: Polyamide, UL94V-0, natural (10 to 30 circuits) LCP, UL94V-0, ivory (32 to 40 circuits) Reinforcing tab: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Contact: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: Polyamide, UL94V-0, natural (10 to 30 circuits) LCP, UL94V-0, ivory (32 to 40 circuits) RoHS2 compliance This product displays (LF)(SN) on a label. The products listed above are supplied on embossed-tape. As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. BM10B-ZPDSS-TF- SM10B-ZPDSS-TFDimensions (mm) Q'ty/ No. of 10 to 30 circuits S...natural Z...ivory MG...moss green TR...tomato red DPK...dark pink E...blue Model No. circuits reel A B 32 to 40 circuits Z...ivory K...black 6.0 700 10 11.2 SM10B-ZPDSS-TF 7.5 700 12 12.7 SM12B-ZPDSS-TF 9.0 700 14 14.2 SM14B-ZPDSS-TF 10.5 700 16 15.7 SM16B-ZPDSS-TF 3 9.2 10.70.6 0.6 12.2 11.2 7.5 0.3 12.76.7 6.7 0.3 9.0 14.2 7.85 (5.7) 5.55 (5.7) 1.5 A Model No. 6.0 Q'ty/ reel Contact: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Wafer: Polyamide, UL94V-0, natural (10 to 30 circuits) LCP, UL94V-0, ivory (32 to 40 circuits) Reinforcing tab: Copper alloy, copper-undercoated, tin-plated (reflow treatment) 1.5 1.5 A A Top entry type No. of circuits 0.6 Material and Finish 5.55 1.5 7.4 0.6 Dimensions (mm) C A B Model No. 7.85 1.5 6.7 1.5 12 (5.7) 5.55 (5.7) 7.4 5.55 1.5 A 1.5 6.7 (8) B B Circuit No.1 mark Circuit No.1 mark B A 0.3 <1210to 30 circuits> BM10B-ZPDSS-TF <12 to 30 circuits> A A 0.3 7.85 (8) 7.85 (5.7) 5.55 B B Circuit No.1 mark Circuit No.1 mark 1 1 (8) A 7.4 7.85 (8) 1.5 7.4 (5.7) 5.55 B B Circuit No.1 mark Circuit No.1 mark