Altech Corp. Interfaces Link incompatible systems, or expand the capabilities of your logic system with Altech interface and electronic modules and carriers. These DIN rail or panel mounted printed circuit board modules and carriers give design flexibility, simplify panel layouts and reduce maintenance and downtime. Modules are supplied completely assembled, with ready to wire screw-cage clamp terminal blocks in an extruded track, and can be mounted on 35 or 32 mm DIN rail or directly to panels. Order ready-made modules or mount your own printed circuit boards into Altech mounting tracks. If your needs go beyond our comprehensive range of standard interface and electronic modules, Altech can custom design modules that meet even the most sophisticated requirements. Interfaces Provide a flexible, cost-effective transition between high density connectors, and high quality screw-cage clamp terminal blocks in communications, data processing, process Sub-D Modules Interface between high density connectors with up to 50 poles and discrete wires. No special tools are required. Equipped with male or female connectors. All terminal blocks are individually marked to correspond to the numbers on the connector pins or sockets. 250 VAC, 4 A; 22-12 AWG. Modules with Sub-D Female Connectors 8 EACH Stock No. Mfr.Os Type Part No. Poles Length (L) mm (In.) 1-4 5-9 502-1109 502-1115 502-1126 502-1137 502-1150 SD-F9 SD-F15 SD-F25 SD-F37 SD-F50 5745.2 5746.2 5747.2 5748.2 5749.2 9 15 25 37 50 45 (1.770) 48 (1.890) 81 (3.190) 114 (4.490) 137 (5.390) 32.10 41.71 51.05 65.09 90.69 29.43 38.24 46.79 59.67 83.13 9 15 25 37 50 45 (1.770) 48 (1.890) 81 (3.190) 114 (4.490) 137 (5.390) 32.10 41.72 47.39 65.09 90.69 29.43 38.24 43.44 59.67 83.13 Modules with Sub-D Male Connectors 502-1209 502-1215 502-1225 502-1237 502-1250 SD-M9 SD-M15 SD-M25 SD-M37 SD-M50 5740.2 5741.2 5742.2 5743.2 5744.2 Diode Modules control and other industrial applications. Equipped with component solder pads for easy insertion of circuit building components. DIN rail mount, panel mount available. Ribbon Cable to Discrete Wire Modules Interface between multiwire flat cables with up to 64 conductors and discrete wires. No special tools are required. Supplied with short strain relief ejector latches (long latches available). Terminal blocks are individually marked to correspond to the numbers on the header pins. 250 VAC, 3 A; 22-12 AWG. EACH Stock No. Mfr.Os Type Part No. Poles Length (L) mm (In.) 1-4 5-9 502-1010 502-1014 502-4202 502-4204 502-4206 502-4208 502-4210 502-4212 502-4214 502-4216 FBK10 FBK14 FBK16 FBK20 FBK26 FBK34 FBK40 FBK50 FBK60 FBK64 5720.2 5721.2 5722.2 5723.2 5724.2 5725.2 5726.2 5727.2 5728.2 5729.2 10 14 16 20 26 34 40 50 60 64 47 (1.850) 47 (1.850) 69 (2.720) 69 (2.720) 80 (3.150) 103 (4.060) 114 (4.490) 148 (5.830) 170 (6.680) 170 (6.680) 28.03 30.48 34.45 38.31 43.40 52.03 61.56 70.55 96.10 101.41 25.69 27.94 31.58 35.11 39.78 47.70 56.43 64.67 88.09 92.96 I/O Opto Carriers Wire individually labeled diodes into existing circuits for freewheeling, DC inductive kick suppression (commutating), reverse DC polarity protection, etc. Used bussed diodes for distribution of logic VCC or ground, or gather and decouple electrical signals for lamp testing or collective fault messages. Use as commutating diodes across inductive loads such as DC relays, solenoid valves, actuator magnets, etc. to suppress voltage surges. Standard modules include series connection diode circuits in 1 A versions, and diode gates with bussed anodes or cathodes. DIN rail mount, panel mount and 3 A diodes available. Can be ordered as component carriers without diodes. Rated Current: 1 A. Bussed Diodes (Fig. A) Stock No. 502-5322 502-5324 502-5326 502-5328 502-5330 502-5332 Mfr.Os Type DM4-S DM8-S DM12-S DM16-S DM20-S DM24-S EACH Part No. No. of Diodes Diode Length (L) mm (In.) 1-4 5-9 8971.2 5702.2 5703.2 8973.2 8974.2 8975.2 4 8 12 16 20 24 1N4007 1N4007 1N4007 1N4007 1N4007 1N4007 22.0 (0.87) 42.0 (1.65) 62.0 (2.44) 90.0 (3.54) 110.0 (4.33) 130.0 (5.12) 19.77 38.79 46.86 63.58 95.71 97.43 18.13 35.56 42.95 58.28 87.73 89.31 8842.2 5704.2 5705.2 6 14 22 1N4007 1N4007 1N4007 22.0 (0.87) 42.0 (1.65) 62.0 (2.44) 27.75 42.39 52.94 25.44 38.86 48.53 8850.2 5706.2 5707.2 6 14 22 1N4007 1N4007 1N4007 22.0 (0.87) 42.0 (1.65) 62.0 (2.44) 42.39 42.39 52.94 38.86 38.86 48.53 Bussed Anodes (Fig. B) 502-5334 502-5336 502-5338 DM6-A-S DM14-A-S DM22-A-S Bussed Cathodes (Fig. C) 502-5340 502-5342 502-5344 DM6-K-S DM14-K-S DM22-K-S 368 b ALLIED Mount standard optocoupler input/output (I/O) modules in a high density arrangement for logic output to field devices, or for input of field data to the controller. Altech I/O carriers can accept up to 16 industry standard 0.6" (15.24 mm) I/O modules in any combination N input, output, AC or DC from most manufacturers. 1, 2, and 4 isolated position versions with 5, 15 and 24 VDC logic; and 4, 8 and 16 bussed (logic power) versions with 5 to 24 VDC. EACH Stock No. Mfr.Os Type Part No. Positions (Sockets) Length (L) mm (In.) 1-4 5-9 502-1361 502-1362 502-1366 502-4240 502-4242 502-4244 502-1370 502-1381 502-9991 502-4246 502-4248 502-4250 I/OI-1B* I/OI-2B* I/OI-4B* I/OI-1E I/OI-2E I/OI-4E I/OI-1Ga I/OI-2Ga I/OI-4Ga I/OB-4 I/OB-8 I/OB-16 8954.0/B 8955.0/B 8956.0/B 8954.0/E 8955.0/E 8956.0/E 8954.0/G 8955.0/G 8956.0/G 8956.0 8959.0 8861.0 1 Isolated 2 Isolated 4 Isolated 1 Isolated 2 Isolated 4 Isolated 1 Isolated 2 Isolated 4 Isolated 4 Bussed 8 Bussed 16 Bussed 34.5 (1.360) 57.8 (2.280) 114.0 (4.490) 34.5 (1.360) 57.8 (2.280) 114.0 (4.490) 34.5 (1.360) 57.8 (2.280) 114.0 (4.490) 114.0 (4.490) 183.0 (7.200) 363.0 (14.30) 31.16 49.68 82.42 34.31 49.68 82.42 31.16 48.47 82.43 84.86 154.17 296.30 28.56 45.54 75.55 31.45 45.54 75.55 28.56 44.43 75.56 77.79 141.32 271.61 Logic Voltage: *5 VDC; 15 VDC; a24 VDC; 5-24 VDC. Need Larger Quantity Prices? Call 1-800-433-5700 For Prompt Handling