SMP Interconnect Series
Carlisle Interconnect Technologies / 12900 Alondra Blvd., Cerritos, CA 90703
Toll Free - 866.282.4708 / Fax - 562.494.0955 / CarlisleIT.com
Metal Specification
BeCu (Beryllium Copper) ASTM B 196 and/or ASTM B 197
Brass ASTM B 36, B121, B16, B16M
Stainless Steel ASTM A484/ A582 or A555/581
Iron-Nickel-Cobalt ASTM F-15
Dielectric Specification
Virgin PTFE Fluorocarbon ASTM D 1710 and ASTM D 1457
Polyamide-imide ASTM D5204 Group 2 Class 1
Glass Corning 7070 or Equivalent
Finish Specification
Gold (75u in. Typ) ASTM-B488 Type 1, Class 1.25
Nickel (100u in. Typ) SAE AMS-QQ-N-290
Pasivation ASTM A967
Carlisle Interconnect Technologies launched the SMP
“push-on” connector product line about two decades ago to
facilitate dense packaging within RF/Microwave systems.
The SMP interface has enabled design engineers to increase
performance and complexity of their designs and improve
upon their form factor.
The SMP interconnect series relies on a floating female-
to-female adapter—commonly referred to as a “bullet”—
to enable stacking of boards equipped with an SMP male
PCB connector. This durable construction and ability to
tolerate radial and axial misalignment allows for a blind-
mate interconnect solution. SMP connectors can also
withstand multiple engagement/disengagement cycles
without degradation in electrical performance.
The success of the SMP product line has spurred the
development and commercialization of other blind-mate
interconnect systems – namely the SSMP®, TMP® and
WMP® to facilitate rapid assembly and testing for the gamut
of Military and Commercial RF/Microwave applications.
INTRODUCTION
»Frequency Range: DC - 40 GHz
»50 Ω Impedance; Blindmateable configuration
»Industry standard per MIL-STD-348
»MIL-PRF-39012 compliant
»Ability to withstand Radial/Axial Misalignment
»Board-mount, Field-replaceable, Bullets, Hermetic and
Cable Connector configurations
»Custom Connectors Available
FEATURES
SPECIFICATIONS
Parameter Specification
Impedance 50 Ω
Frequency range DC - 40 GHz
VSWR DC - 26 GHz: 1.15 : 1 (max)
26 - 40 GHz: 1.40:1 (max)
Insertion Loss 0.1 x √ f(GHz)
D W V @ S e a Level 500 Vrms
Insulation Resistance 5000 MΩ (min)
RF High Pot 325 Vrms @ 5 MHz
Force to Engage
Full Detent 15 lbs typical
Limited Detent 7 lbs typical
Smooth Bore 2 lbs typical
Force to
Disengage
Full Detent 5 lbs typical
Limited Detent 3 lbs typical
Smooth Bore 0.5 lbs typical
Radial Misalignment +/- .020 inches*
Axial Misalignment .010 inches
Temperature range -55° C to +165° C
Thermal Shock MIL-STD-202, Method 107, Cond B
Moisture Resistance MIL-STD-202, Method 106, except step 7b
Corrosion MIL-STD-202. Method 101, Cond B
Vibration MIL-STD-202, Method 204, Cond D
Shock MIL-STD-202, Method 213, Cond I
*When mated to a Catcher’s Mitt interface
MATERIALS & FINISH
CABLE CONNECTORS - FOR FLEXIBLE CABLES
SMP Configurations
SMP Female Right Angle Connector for Flexible Cables, 18 GHz / P600
SMP Female Right Angle Connector for Flexible Cables, 26.5 GHz / P601
SMP Male Straight Panel Moount Connector for Flexible Cables / P663
SMP Female Straight Connector for Flexible Cables / P657
P/N Cable TyPe
-1CC RG178
-2CC RG316
-3CC RD178
-4CC RD316
-9CC TLL18-1087
P/N (Ø a) Cable TyPe FIGURe
-9CC (.090) TLL18-1087 1
-11CC (.122) TLL40-1111A 2
P/N (Ø a) Cable TyPe FIGURe
-9CC (.090) TLL18-1087 1
-11CC (.122) TLL40-1111A 2
P/N Cable TyPe INTeRFaCe
-1CC M17/93-RG178
(OR EQUIVALENT) CATCHER’S MITT
-2CC RD178 (OR EQUIVALENT) CATCHER’S MITT
-3CC M17/113-RG316
(OR EQUIVALENT) CATCHER’S MITT
-4CC RD316 (OR EQUIVALENT) CATCHER’S MITT
-5CC M17/93-RG178
(OR EQUIVALENT) LIMITED DETENT
-6CC RD178 (OR EQUIVALENT) LIMITED DETENT
P/N Cable TyPe INTeRFaCe
-7CC M17/113-RG316
(OR EQUIVALENT) LIMITED DETENT
-8CC RD316 (OR EQUIVALENT) LIMITED DETENT
-9CC M17/93-RG178
(OR EQUIVALENT) FULL DETENT
-10CC RD178 (OR EQUIVALENT) FULL DETENT
-11CC M17/113-RG316
(OR EQUIVALENT) FULL DETENT
-12CC RD316 (OR EQUIVALENT) FULL DETENT
CABLE CONNECTORS - FOR SEMI-RIGID & SEMI-FLEX CABLES
SMP Female Straight Connector for Semi-Rigid and
Semi-Flex Cables / P651
SMP Female Float Mount Connector for Semi-Rigid and
Semi-Flex Cables / P658 (Continued)
P/N Cable TyPe (Ø a) FIGURe
-1CC Ø .047 SEMI-RIGID CABLE .049 MIN 2
-2CC Ø .085 SEMI-RIGID CABLE .085 MIN 1
-3CC Ø .047 MICROPOROUS CABLE .047 MIN 2
-4CC Ø .085 MICROPOROUS CABLE .085 MIN 1
Figure 2
SMP FEMALE
INTERFACE PER
MIL-STD-348
(Ø .135 MAX)
ANTI-ROCK RING
(2x Ø .135)
Ø A
(.252)
R.P.
(.300)
DIELECTRIC
STOP
P/N Cable TyPe FIGURe
-1CC UFF Ø .092A
1
-2CC M17/113-RG316
-3CC TLL40-1087
-4CC MICROFLEX Ø .095
-5CC Ø .085 SEMI-RIGID
-6CC UFF Ø .092A
2
-7CC M17/113-RG316
-8CC TLL40-1087
-9CC MICROFLEX Ø .095
-10CC Ø .085 SEMI-RIGID
-11CC Ø .047 SEMI-RIGID 1
-12CC Ø .047 SEMI-RIGID 2
SMP Female Float Mount Connector for Semi-Rigid and
Semi-Flex Cables / P658
SMP Female Right Angle For Semi-Rigid/Semi-Flex Cables,
12 GHz / P652
(Ø .185)
ANTI-ROCK RING
(.211)
CAP
SMP FEMALE
INTERFACE PER
MIL-STD-348
(Ø .135) MAX
Ø A
(.265)
(.150)
P/N Ø a Cable TyPe
-1CC .049 MIN .047 SEMI-RIGID
-2CC .088 MIN .085 SEMI-RIGID
-3CC .049 MIN .047 MICROPOROUS
-4CC .088 MIN .085 MICROPOROUS
(.75)
HEAT SHRINK
TUBING
DIELECTRIC
STOP
CENTER
CONDUCTOR
SEE TABULATION
FOR CABLE TYPE(S)
SMP FEMALE
INTERFACE PER
MIL-STD-348 .300
.252
.135
R.P.
Ø .135 MAX
CAP
(.330)
(.260)
SMP FEMALE
INTERFACE PER
MIL-STD-348
R.P.
(.364)
(Ø .131)
Ø .159
Ø A
ANTI-ROCK RING
SMP FEMALE
INTERFACE PER
MIL-STD-348
R.P.
(.255)
(Ø .120)
(Ø A)
ANTI-ROCK RING
CAP
(.150)
(.344)
Figure 1 Figure 2
(.186)
(Ø .230)
(.050)
(Ø .198)
(.325)
(Ø .125)
(.155)
(.240)
ACROSS FLATS
(Ø .375)
(11/64—56 UNRS—2A)
DIELECTRIC BEAD
CENTER CONDUCTOR SHRINK TUBING
CARLISLE
Figure 1
(.304)
(.75)
SMP FEMALE
INTERFACE PER
MIL-STD-348
R.P.
(Ø .135 MAX)
ANTI-ROCK RING
(.265)
(.200)
SHRINK
TUBING
FLEXIBLE
CABLE
SMP FEMALE
INTERFACE PER
MIL-STD-348
R.P.
(Ø .135 MAX)
ANTI-ROCK RING
(.265)
(.200)
SHRINK
TUBING
FLEXIBLE
CABLE
Figure 2
(.110)
(.200) PANEL
THICKNESS
FLEX CABLE
SCREWDRIVER
SLOT
SMP MALE
INTERFACE PER
MIL-STD-348
R.P.
Recommended Panel Hole
(.200) PANEL
THICKNESS
.150±.003
Ø .201±.001
Ø .233±.001
.050±.001
2
SMP FEMALE
INTERFACE PER
MIL-STD-348
(Ø .135 MAX)
ANTI-ROCK RING
(2x Ø .135) Ø A
(.252)
R.P.
Figure 1
Recommended Mounting Panel
Figure 1
Figure 2
(Ø .293)
R.P.
SMP FEMALE
INTERFACE PER
MIL-STD-348 (.153)(.237)
(.484)
(.221)FOR
.093
PANEL
SEE APPLICABLE
DASH(ES) NUMBER(S)
FOR CABLE TYPE(S) CENTER
CONDUCTOR
DIELECTRIC
STOP
DIELECTRIC STOP
(FOR -11CC)
CENTER CONDUCTOR
(FOR -11CC)
HEAT SHRINK
TUBING
CARLISLE
(.75)
Ø .273
.271 Ø .283
±.002
30°
.095
.091
(Ø .293)
R.P.
SMP FEMALE
INTERFACE PER
MIL-STD-348 (.153)(.237)
(.484)
(.221)FOR
.093
PANEL
SEE APPLICABLE
DASH(ES) NUMBER(S)
FOR CABLE TYPE(S)
CENTER
CONDUCTOR
DIELECTRIC
STOP
HEAT SHRINK
TUBING
CARLISLE
(.75)
FLOAT
MOUNT
METAL SLEEVE (FOR -6CC)
THRU -10CC AND -12CC)
3
SMP Configurations
SMP Male Bulkhead Panel Mount Connector for
Semi-Rigid Cables / P662
SMP Female Right Angle For Semi-Rigid/Semi-Flex Cables,
18 GHz / P659
SMP Female Right Angle For Semi-Rigid/Semi-Flex Cables,
26.5 GHz / P655
(Ø .135 MAX)
SMP FEMALE
INTERFACE PER
MIL-STD-348
(.135)
ANTI-ROCK RING
(.200)
(.265)
R.P.
Ø A
(.200)
(Ø .135 MAX)
SMP FEMALE
INTERFACE PER
MIL-STD-348
ANTI-ROCK RING
(.230)
R.P.
Ø A
(.190)
(.150)
(.224)
CAP
DIELETRIC
STOP
(.150)
Figure 1
Figure 2
CAP
SMP FEMALE
INTERFACE PER
MIL-STD-348
ANTI-ROCK RING
R.P.
Ø A
(.190)
(.224)
(.135)
(.255)
(1.5000)
P/N Ø a Cable TyPe
-1CC .049 MIN .047 SEMI-RIGID
-2CC .088 MIN .085 SEMI-RIGID
-3CC .049 MIN .047 MICROPOROUS
-4CC .088 MIN .085 MICROPOROUS
P/N Ø a Cable TyPe FIGURe
-1CC .049 MIN Ø .047 SEMI-RIGID 1
-2CC .088 MIN Ø .085 SEMI-RIGID 2
-3CC .049 MIN Ø .047 MICROPOROUS 1
-4CC .088 MIN Ø .085 MICROPOROUS 2
P/N Cable TyPe INTeRFaCe
-1CC Ø .047 S/R CATCHER’S MITT
-2CC Ø .085 S/R CATCHER’S MITT
-3CC Ø .047 L/L CATCHER’S MITT
-4CC Ø .085 L/L CATCHER’S MITT
-5CC Ø .047 S/R FULL DETENT
-6CC Ø .085 S/R FULL DETENT
-7CC Ø .047 L/L FULL DETENT
-8CC Ø .085 L/L FULL DETENT
-9CC Ø .047 S/R LIMITED DETENT
-10CC Ø .085 S/R LIMITED DETENT
-11CC Ø .047 L/L LIMITED DETENT
-12CC Ø .085 L/L LIMITED DETENT
-13CC Ø .085 S/R LIMITED DETENT / CATCHER’S MITT
CABLE CONNECTORS - FOR SEMI-RIGID & SEMI-FLEX CABLES (CONT.) PCB CONNECTORS - THROUGH HOLE BOARD MOUNT
SMP Male PCB Mount to a Straight Termination / P654
P/N INTeRFaCe (Ø a) (Ø b) (C) FIGURe
-1CC LIMITED DETENT .120 (.218) .079 2
-2CC FULL DETENT .116 (.218) .079 2
-3CC SMOOTH BORE .125 (.218) .079 2
-4CC CATCHER’S MITT .125 (.235) .079 1
-5CC FULL DETENT .116 (.218) .100 2
-6CC LIMITED DETENT .120 (.218) .100 2
-7CC SMOOTH BORE .125 (.218) .100 2
-8CC CATCHER’S MITT .125 (.235) .100 1
-9CC FULL DETENT .116 (.218) .140 2
-10CC LIMITED DETENT .120 (.218) .140 2
-11CC SMOOTH BORE .125 (.218) .140 2
-12CC CATCHER’S MITT .125 (.235) .140 1
P/N INTeRFaCe (Ø a) (Ø b) (C)
-1CC FULL DETENT .116 .125 .287
-2CC FULL DETENT .116 .115 .297
-3CC FULL DETENT .116 .155 .337
DIELECTRIC BEAD
CENTER CONDUCTOR
(.240)
(.325)
(Ø .375)
(Ø .125) (Ø .198)
(Ø .230)
(.186)
(.050)
(11/64-56 UNRS-2A) (.375)
ACROSS FLATS
(Ø .375)
Installed View Recommended Panel Hole
SMP MALE
INTERFACE PER
MIL-STD-348
SCREWDIVER
SLOT
(Ø .375)
CABLE
(.110)
(.200) PANEL
THICKNESS
R.P.
(.200) PANEL
THICKNESS
.150±.003
Ø .233±.001 Ø .201±.001
.050±.001
4
Recommended Mounting
Hole Pattern
Figure 1
(.100 TYP)
(4X Ø .044)
(4X Ø .027)
(Ø B)
SMP MALE
INTERFACE PER
MIL-STD-348
(Ø .028)
(.196)
R.P.
(Ø A)
R.P.
(5X C)
(.110) (.086)
2X .100
2X .050
Ø .031/.034 4X Ø .037/.039
5
Figure 2
SMP MALE
INTERFACE PER
MIL-STD-348
(Ø .028)
(.196)
R.P.
(Ø A)
R.P.
(5X C)
(.086) (.100 TYP)
(4X Ø .044)
(4X Ø .027)
(Ø B)
Figure 1 Figure 2
SMP MALE
INTERFACE PER
MIL-STD-348
R.P.
(Ø A)
(.110)
4X
(.182)
R.P.
5X
(.140)
4X
(.010)
SMP MALE
INTERFACE PER
MIL-STD-348
(Ø A)
4X
(.182)
R.P.
5X
(.140)
4X
(.010)
R.P.
(.110)
P/N INTeRFaCe (Ø a) FIGURe
-1CC FULL DETENT .116 1
-2CC LIMITED DETENT .120 1
-3CC SMOOTH BORE .125 1
-4CC CATCHER’S MITT .125 2
Recommended Mounting Hole Pattern
.076
.074
4X Ø .037
.035
2X .150
.145
Ø .021
.019
4X (Ø .030)
4X (Ø .068)
(Ø .015)
(Ø .272)
(.200 SQ.)
.150 TYP.
SMP Male Straight PCB Mount - Square Body / P603
SMP Male Right Angle PCB Mount / P646
Recommended Mounting
Hole Pattern
SMP MALE
INTERFACE PER
MIL-STD-348
R.P.
(.320)
(4X .015) (5X C)
(5X B)
R.P.
(4X .092)
(Ø .024)
(4X Ø .020)
(Ø A)
(.110) 4X Ø .032
.028
2X .051
.048
Ø .034
.031
.102
.098
.102
.098
R.P. (4X Ø .020)
(4X Ø .042)
(.110)
(Ø .164)
(.050 TYP.)
(.100 TYP.) (.120 SQ.)
(.010 TYP.)
SMP Configurations
P/N INTeRFaCe (Ø a)
-1 FULL DETENT .116
-2 LIMITED DETENT .120
-3 SMOOTH BORE .125
P/N INTeRFaCe (Ø a) FIGURe
-1CC FULL DETENT (.116) 1
-2CC LIMITED DETENT (.120) 1
-3CC SMOOTH BORE (.125) 1
-4CC CATCHER’S MITT (.125) 2
P/N INTeRFaCe (Ø a) (b) FIGURe
-1CC FULL DETENT (.116) .075 1
-2CC LIMITED DETENT (.120) .075 1
-3CC SMOOTH BORE (.125) .075 1
-4CC CATCHER’S MITT (.125) .075 2
-5CC FULL DETENT (.116) .140 1
-6CC LIMITED DETENT (.120) .140 1
-7CC SMOOTH BORE (.125) .140 1
-8CC CATCHER’S MITT (.125) .140 2
PCB CONNECTORS - EDGE MOUNT
SMP Male Straight Edge Mount Connector / P606
P/N INTeRFaCe (Ø a)
-1CC FULL DETENT .116
-2CC LIMITED DETENT .120
-3CC SMOOTH BORE .125
P/N INTeRFaCe Ø a b C
-1CC FULL DETENT .116 .090 .095
-2CC LIMITED DETENT .120 .090 .095
-3CC SMOOTH BORE .125 .090 .095
-4CC FULL DETENT .116 .050 .055
-5CC LIMITED DETENT .120 .050 .055
-6CC SMOOTH BORE .125 .050 .055
SHROUDS - FLANGE MOUNT
SMP Shroud - Full Detent Straight 2-Hole Flange Mount / P670
P/N INTeRFaCe (Ø a) FIGURe
-1CC FULL DETENT (.116) 1
-2CC LIMITED DETENT (.120) 1
-3CC SMOOTH BORE (.125) 1
-4CC CATCHER’S MITT (.125) 2
P/N a b Ø C Ø D e F G
-1SF .328 .187 .098 .480 .120 .045 .004
-2SF .481 .223 .102 .625 .120 .045 .002
-3SF .282 .165 .073 .400 .120 .045 .002
-4SF .400 .186 .103 .550 .120 .045 .004
-5SF .282 .165 .073 .400 .120 .045 .005
-6SF .282 .165 *.400 .120 .045 .005
-7SF NR NR NR .625 .120 .075 .003
-8SF .481 .223 .102 .625 .120 .045 .004
-8 .481 .223 .102 .625 .120 .045 .004
-9SF .282 .165 .073 .400 .120 .045 .004
-10SF .328 .187 .098 .480 .120 .045 .005
* 2X #0-80 UNF-2B X Ø .085 X 90°Countersunk
Ø D
B
A
2X Ø C
SMP MALE INTERFACE
PER MIL-STD-348
FULL DETENT
(LESS CONTACT)
E
G
Ø .162
.110
±.002
.045
R.P.
(.126)
(2X .007)
(Ø .193)
(.078)
(2X .068)
(2X .065)
Figure 1 Figure 2
Ø A
SMP MALE
INTERFACE PER
MIL-STD-348
(.020)
R.P.
(Ø .164)
(.050)
CENTER CONDUCTOR
(Ø .015)
CENTER
CONDUCTOR
(.307)
(.125)
(2X .065)
(2X .026)
(.110)
R.P.
(.126)
(2X .007)
(.078)
(2X .068)
(2X .065)
Ø A
SMP MALE
(CATCHERS MITT)
INTERFACE PER
MIL-STD-348
R.P.
(Ø .235)
(.050)
CENTER CONDUCTOR
(Ø .015)
CENTER
CONDUCTOR
(.307)
(.125)
(.110)
R.P.
SMP Male Straight Edge Mount Connector / P698
.019
.059
.051
.021
.055 TYP
Recommended PCB
Mounting Pattern
SMP Male Straight to Surface Mount with Posts / P797
Mounting Hole Pattern
Dimensions shown are for Rogers 4350 PCB Material. These dimensions may vary depending on PCB material used.
R .015 TYP.
.0425 TYP. Ø .075
Ø .180/.175
.085±.002 TYP
.054
.019
PLATED THROUGH HOLES
.046 TYP.
.089
Ø .012 TYP
4X Ø .025
.075 TYP
.030 TYP
.057 TYP
.018 TYP
.050 TYP
.044
.020
SMP MALE INTERFACE
PER MIL-STD-348
R.P.
(.026)
(.010)
(.200)
(Ø A)
(.110)
(Ø .165)
4X (B)
.113 (Ø .075)
(.054)
Ø .015
(4X Ø .020)
2X (Ø .165)
(.085 TYP)
Figure 1
Figure 2
SMP MALE INTERFACE
PER MIL-STD-348
R.P.
(.026)
(.010)
(.200)
(Ø A)
(.110)
(Ø .165)
4X (B)
.113 (Ø .075)
(.054)
Ø .015
(4X Ø .020)
2X (Ø .165)
(.085 TYP) (Ø .235)
SMP Male Straight Surface Mount / P703
Mounting Hole Pattern
Dimensions shown are for Rogers 4350 PCB Material. These dimensions may vary depending on PCB material used.
Figure 1
Figure 2
.089
.054
.021
.051 R .015 TYP.
.030 TYP.
.088
Ø .075
Ø .180/.175
2X .019
SMP MALE INTERFACE
PER MIL-STD-348
R.P.
(.026)
(Ø .165)
(.010)
(.200)
(Ø A)
(.110)
.113 (Ø .075)
(.054)
(Ø .015)
2X (Ø .165)
.113 (Ø .075)
(.054)
Ø .015
2X (Ø .165)
(Ø .235)
SMP MALE INTERFACE
PER MIL-STD-348
R.P.
(.026)
(.010)
(.200)
(Ø A)
(.110)
(Ø .165)
PCB CONNECTORS - SURFACE MOUNT
SMP Shroud Solder-in Surface Mount - Short Body / P677
SMP MALE
INTERFACE PER
MIL-STD-348
R.P.
(Ø A)
(.020)
R.P.
(Ø .164)
(.120)
(Ø .195)
6
PCB Mount Detail
(.268)
(Ø .029) TPY
PLATED THRU HOLES
.050 TYP
.059
.051
.021
2X .218
2X .145
2X .073
.019
.170
.165
.238
.305
(2X Full R .0125)
.200 2X D
Recommended PCB Cutout
Ø .250
2X .045 WIDE TABS
Ø .015
.160
2X .074
.175
R.P.
(.110)
Ø A
SMP MALE
INTERFACE PER
MIL-STD-348
.171
.200
R.P.
3X B
2X .015
THICK TABS
SMP Male Straight Surface Mount / P839
Mounting Hole Pattern
Grounded Coplanar Waveguide: Rogers 4350
.174
2X .050
2X .078
2X .078
.040
.070 .168
.106
.024
.031
2X .007
R.P.
(Ø A)
(.110)
(Ø .164)
(.200)
(.095)
.137
(Ø .179) (.179 SQ)
(Ø .078)
(Ø .022)
7
SMP Configurations
SHROUDS - THREAD-IN
SMP Shroud - Thread-In / P676
SMP Press-In Shroud - Short Body / P769
SHROUDS - PRESS-IN
SMP Press-In Shroud / P675
SMP Shroud - Smooth bore Straight 2-Hole Flange Mount / P673
SMP Shroud - Limited Detent Straight 2-Hole Flange Mount / P672
P/N a b Ø C Ø D e
-1SF .328 .187 .098 .480 .004
-2SF .481 .223 .102 .625 .004
-3SF .282 .165 .073 .400 .002
-4SF .400 .186 .103 .550 .004
P/N (a) (b) (Ø C) (Ø D) (e) (F)
-1SF .328 .187 .098 .480 .120 .004
-2SF .481 .223 .102 .625 .120 .002
-3SF .282 .165 .073 .400 .120 .002
P/N INTeRFaCe FIGURe
-1SF FULL DETENT 1
-2SF LIMITED DETENT 1
-3SF SMOOTH BORE 1
-4SF CATCHER’S MITT 2
P/N INTeRFaCe
-1SF FULL DETENT
-2SF LIMITED DETENT
-3SF SMOOTH BORE
P/N (a) (Ø b) (Ø C) (D)
-1SF .080 .143 .154 50P
-2SF .120 .163 .174 50P
-3SF .115 .163 .184 128P
SHROUDS - FLANGE MOUNT (CONT.) SMP Shroud - Thread-In / P676 (Continued) SHROUDS - FIELD-REPLACEABLE
SMP (male) 2-hole flange mount (accepts 0.012” pin) / P836
HERMETICS
SMP Male Hermetic Shroud - Short Body / P680
P/N INTeRFaCe a b Ø C D Ø e
-1CC FULL DETENT (.116)
.165 .625 .481±.002 .078
-1CCSF
-2CC LIMITED DETENT (.120)
-2CCSF
-3CC SMOOTH BORE (.125)
-3CCSF
-4CC FULL DETENT (.116)
.223 .625 .481±.002 .078
-4CCSF
-5CC LIMITED DETENT (.120)
-5CCSF
-6CC SMOOTH BORE (.125)
-6CCSF
-7CC FULL DETENT (.116)
.223 .485 .350±.002 .102
-7CCSF
-8CC LIMITED DETENT (.120)
-8CCSF
-9CC SMOOTH BORE (.125)
-9CCSF
P/N INTeRFaCe (Ø a) (b) (C) D e F G
-1CC FULL DETENT .116 .120 .040 .037/.039 .050 .050±.001
SEE DETAIL A
-2CC LIMITED DETENT .120 .120 .040 .037/.039 .050 050±.001
-3CC SMOOTH BORE .125 .120 .040 .037/.039 .050 050±.001
-4CC FULL DETENT .116 .120 .040 .037/.039 .050 050±.001
-5CC LIMITED DETENT .120 .120 .040 .037/.039 .050 050±.001
-6CC SMOOTH BORE .125 .120 .040 .037/.039 .050 050±.001
-10CC FULL DETENT .116 .120 .040 .037/.039 .070 050±.001
-11CC LIMITED DETENT .120 .120 .040 .037/.039 .070 050±.001
-12CC SMOOTH BORE .125 .120 .040 .037/.039 .070 050±.001
-13CC FULL DETENT .116 .120 .040 .037/.039 .090 050±.001
-14CC LIMITED DETENT .120 .120 .040 .037/.039 .090 050±.001
-15CC SMOOTH BORE .125 .120 .040 .037/.039 .090 050±.001
-22CC FULL DETENT .116 .120 .040 .037/.039 .050 050±.001
SEE DETAIL B
-23CC LIMITED DETENT .120 .120 .040 .037/.039 .050 050±.001
-24CC SMOOTH BORE .125 .120 .040 .037/.039 .050 050±.001
-25CC FULL DETENT .116 .120 .040 .037/.039 .070 050±.001
-26CC LIMITED DETENT .120 .120 .040 .037/.039 .070 050±.001
-27CC SMOOTH BORE .125 .120 .040 .037/.039 .070 050±.001
-28CC FULL DETENT .116 .120 .040 .037/.039 .090 050±.001
-29CC LIMITED DETENT .120 .120 .040 .037/.039 .090 050±.001
-30CC SMOOTH BORE .125 .120 .040 .037/.039 .090 050±.001
SMP Male Hermetic Shroud / P682
P/N INTeRFaCe (Ø a) l EDeTaIl
-1CC FULL DETENT .116 .050 .030 A
-2CC LIMITED DETENT .120 .050 .030 A
-3CC SMOOTH BORE .125 .050 .030 A
-4CC FULL DETENT .116 .240 .220 B
-5CC LIMITED DETENT .120 .240 .220 B
-6CC SMOOTH BORE .125 .240 .220 B
Detail A
Detail B
Recommended Mounting Hole
SMP MALE
INTERFACE PER
MIL-STD-348
R.P.
(Ø A)
(Ø .0150)
G
F
E
(C)
(Ø .145)
(B)
R.P.
(Ø .099)
SQUARE CUT
FULL RADIUS
.082 AS REQ’D
AS REQ’D
SOLDER PREFORM
.015
.013
AS REQ’D
.007
.005
Ø .1020
.1010
Ø .140
.135
Ø .036
.134
Ø .081
.077
D
SMP Male Hermetic Shroud - Short Body / P680 (Continued)
Recommended
Mounting Hole
SMP MALE
INTERFACE PER
MIL-STD-348
(Ø .224)
(.030)
SCREW DRIVER
SLOT
(1/4-48 UNS-2A
THREAD)
(Ø .050)
(.050)
(.120)
(.004 X45)
Figure 1
Figure 2
SMP MALE
INTERFACE PER
MIL-STD-348
(.030)
SCREW DRIVER
SLOT
(10-48 UNS-2A
THREAD)
(.120)
(.004 X45)
(Ø .050)
(.050)
(Ø .160)
Ø .176/.178
STRAIGHT KNURL
SMP MALE
INTERFACE PER
MIL-STD-348
(LESS CONTACT)
(Ø .050)
R.P.
(Ø .170)
(.120)
AS REQ’D
AS REQ’D
.100 MIN
.005 X 45°
CHAMBER
Ø .1735
±.0010
(Ø C)
SMP MALE
INTERFACE PER
MIL-STD-348
(D) STRAIGHT
KNURL
(Ø B)
(A)
(Ø D) (A)
2X Ø C
(B)
SMP MALE INTERFACE
PER MIL-STD-348
(SMOOTH BORE)
(E)
(.110)
(Ø .164)
(.045)
R.P.
(F)
(Ø .125)
Ø D
B
A
2X Ø C
SMP MALE INTERFACE
PER MIL-STD-348
FULL DETENT
(LESS CONTACT)
E
.120
Ø .162
.110
±.002
.045
R.P.
8
D
B2X Ø E
Ø C
SMP MALE INTERFACE
PER MIL-STD-348
(FULL DETENT)
Ø .124±.001
R.P.
Ø .164±.001 (Ø A)
R.P.
(.110)
.229±.002
.065
.002/.005
FEMALE SOCKET
TO ACCEPT Ø
.012±.001 PIN
9
Recommended Mounting HoleInstallation View
SMP MALE
INTERFACE PER
MIL-STD-348
(Ø .164)
L
(Ø A)
(.120)
(Ø .0150)
(.180)
SEE DETAIL A & B
(Ø .099)
Detail A
Detail B
FULL RADIUS
Ø .102
.101
Ø .081
.077
Ø .036
.034
.007
.005
.015
.011
Ø .140
.135
.057
.055 .078
.076
SOLDER
PREFORM
.123 .078
E
SMP Configurations
BULLETS/ADAPTERS
SMP Female to SMP Female Bullet / P617
SMP Male 50 Ohm Termination / P919
SMP Female Short / P930-1CC
OPEN/SHORTS/LOADS
SMP Female 50 Ohm Termination / P918
SMP Female Open / P931-1
SMP Male Hermetic Thread-In with Mounting Nut / P683
SMP Male Hermetic Thread-In / P761
P/N INTeRFaCe (Ø a)
-1CC FULL DETENT (.116)
-2CC LIMITED DETENT (.120)
-3CC SMOOTH BORE (.125)
P/N INTeRFaCe (Ø a)
-1CC LIMITED DETENT (.120)
-2CC FULL DETENT (.116)
P/N
-1CC
P/N INTeRFaCe (Ø a)
-1CCSF FULL DETENT .116
-2CCSF LIMITED DETENT .120
-3CCSF SMOOTH BORE .125
HERMETICS (CONT.) SMP Male to SMP Female Adapter / P914
SMP Male Bulkhead to SMP Male Cathcer’s Mitt / P912
SMP Male to SMP Female Catcher’s Mitt / P916
SMP Female to SMP Female Spring Loaded Bullet / P922
P/N a FIGURe
-1CC .768/.770 1
-2CC .850/.852 1
-3CC 1.365/1.367 1
-4CC .439/.441 2
-5CC .768/.770 2
P/N a FIGURe
-6CC .414/.416 1
-7CC .427/.429 1
-8CC .538/.540 3
-9CC .528/.530 3
P/N FIGURe
-1CC 1
-2CC 2
P/N FIGURe
-3CC 3
-4CC 4
P/N INTeRFaCe (Ø a)
-1CCSF FULL DETENT .116
-2CCSF LIMITED DETENT .120
-3CCSF SMOOTH BORE .125
P/N INTeRFaCe (Ø a)
-1CCSF FULL DETENT .116
-2CCSF LIMITED DETENT .120
-3CCSF SMOOTH BORE .125
P/N INTeRFaCe (Ø a)
-1CCSF FULL DETENT .116
-2CCSF LIMITED DETENT .120
-3CCSF SMOOTH BORE .125
P/N FIGURe a (oPeN) a (CloseD) b o-RING sPRING
PRe-loaD
sPRING
RaTe
-2CC 1.510 .460 .115 NOT REQ’D 1.95 LBS 15.0 LBS/IN
-3CC 2.745 .695 .115 NOT REQ’D 1.21 LBS 5.5 LBS/IN
-4CC 2.660 .610 .135 REQ’D 1.21 LBS 5.5 LBS/IN
SMP Female to SMP Female Bullet / P617 (Continued)
SMP FEMALE
INTERFACE PER
MIL-STD-348
(2 PLC’S)
2X Ø .135 MAX
2X .135 Ø.165
R.P.R.P.
A
SMP FEMALE
INTERFACE PER
MIL-STD-348
(Ø .135 MAX)
(.135)
(.500)
(Ø .187)
EMI RING ANTI-ROCK RING
SMP MALE
INTERFACE PER
MIL-STD-348
(Ø .164) (Ø A)
(.340)
(.110)
R.P. DIAMOND KNURL
SMP FEMALE
INTERFACE PER
MIL-STD-348
(Ø .135 MAX)
(.135)
(.500)
(Ø .187)
EMI RING
ANTI-ROCK RING
SMP FEMALE
INTERFACE PER
MIL-STD-348
(Ø .135 MAX)
(.135)
(.500)
(Ø .187)
EMI RING ANTI-ROCK RING
(.250 HEX)
SMP MALE
INTERFACE PER
MIL-STD-348 (Ø .015)
(.065)
(.110)
(.180)
.050
R.P.
10-48 UNS-2A THREAD
Ø A
Recommended Mounting Hole
.010
.125
Ø .054
SMP MALE
INTERFACE PER
MIL-STD-348
(Ø .155)
(.100)
R.P.
(Ø A)
R.P.
(.205)
.060
(Ø .015)
(2X .045 WIDE X .050 DEEP)
SCREWDRIVER SLOT
10-48 UNS-2A THD
MAJOR: Ø .1847/.1892
PITCH: Ø .1730/.1755
Figure 1
Figure 2
2X .135
2X Ø .135 MAX
Ø.165
A
R.P.R.P.
SMP FEMALE
INTERFACE PER
MIL-STD-348
(2 PLC’S)
2X Conductive O Ring
10
SMP MALE
INTERFACE PER
MIL-STD-348
(Ø .125)
SMP MALE CATHCHER’S
MITT INTERFACE PER
MIL-STD-348
(.110)
2X (.050)
(Ø A)
(.110)
(.242)
(.058)
(10-32 UNF-2A)
R.P.
R.P.
(.250 HEX)
SMP FEMALE INTERFACE
PER MIL-STD-348
(Ø .164)
SMP MALE INTERFACE
PER MIL-STD-348
(Ø A)
(.110)
(.507)
(.134)
R.P.
(.135)
R.P.
(Ø .135) MAX
(.187 HEX)
SMP MALE
INTERFACE PER
MIL-STD-348
SMP MALE
CATHCHER’S MITT
INTERFACE PER
MIL-STD-348
(Ø A)
R.P.
(Ø .125)
(.110)
(.110)
R.P.
(.459)
(.234)
(#10-32 UNF-2A THREAD)
LOCK WASHER
LOCKNUT
(.250 HEX)
Mounting Hole Pattern
.125
10-32 UNF-2B
THREAD
SMP FEMALE INTERFACE
PER MIL-STD-348
(Ø .125)
(.115)
R.P.
NON-STANDARD SMP
FEMALE INTERFACE*
R.P.
Ø .135 MAX
B
A (OPEN)
A (CLOSED)
SMP Female to SMP Female Bullet - Short Body / P650
Figure 1 Figure 3
SMP FEMALE INTERFACE
PER MIL-STD-348
2X
(Ø .135 MAX)
R.P.
(.254)
R.P.
Figure 2
SMP FEMALE INTERFACE
PER MIL-STD-348
2X
(Ø .135 MAX)
R.P.
(.395)
R.P.
(.2535)
Figure 4
SMP FEMALE INTERFACE
PER MIL-STD-348
2X
(Ø .135 MAX)
R.P.
(.224)
R.P.
SMP FEMALE INTERFACE
PER MIL-STD-348
2X
(Ø .135 MAX)
R.P.
(.569)
R.P.
(.100) (.235)
* FOR USE WITH SMOOTH BORE AND CATCHER’S MITT INTERFACES ONLY
Figure 3
11
Figure 1
2X .135
2X Ø .135 MAX
Ø.165
A
R.P.R.P.
SMP FEMALE
INTERFACE PER
MIL-STD-348
(2 PLC’S)
Anti-Rock Ring
Figure 2
SMP FEMALE INTERFACE
PER MIL-STD-348
(Ø .125)
(.115)
R.P.
NON-STANDARD SMP
FEMALE INTERFACE*
R.P.
Ø .135 MAX
B
A (OPEN)
A (CLOSED)
O-RING
(SEE TABLE BELOW)
Ordering Information
Carlisle Interconnect Technologies / 12900 Alondra Blvd., Cerritos, CA 90703
Toll Free - 866.282.4708 / Fax - 562.494.0955 / CarlisleIT.com
Configuration Part Number* Description Options
Cable
Connectors
For Flexible Cables
P657 SMP (female) straight conn for flexible cables
Available for different flexible cables (see figure)
P600 SMP (female) rt angle conn for flexible cables, 18 GHz
P601 SMP (female) rt angle conn for flexible cables, 26.5 GHz
P663 SMP (male) straight panel mount conn for flexible cables
For Semi-rigid &
Semi-flex Cables
P651 SMP (female) straight conn for semi-rigid and semi-flex cables
0.047” & 0.085” cable versions available
(see figure)
P658 SMP (female) float mount conn for semi-rigid and semi-flex cables
P652 SMP (female) rt. angle for semi-rigid/semi-flex cables, 12 GHz
P655 SMP (female) rt. angle for semi-rigid/semi-flex cables, 26.5 GHz
P659 SMP (female) rt. angle for semi-rigid/semi-flex cables, 18 GHz
P662 SMP (male) bulkhead panel mount conn for semi-rigid cables
PCB
Connectors
Through hole
Board Mount
P654 SMP (male) PCB mount to a straight termination Different heights and detents available (see figure)
P603 SMP (male) straight PCB mount - square body
P646 SMP (male) rt. angle PCB mount Different heights available (see figure)
Surface Mount
P677 SMP shroud solder-in surface mount - short body
Different detents available (see figure)
P703 SMP (male) straight surface mount
P797 SMP (male) straight to surface mount w/ posts
P839 SMP (male) straight surface mount
Edge Mount P606 SMP (male) straight edge mount connector
P698 SMP (male) straight edge mount connector
Shrouds
Flange Mount
P670 SMP shroud - full detent straight 2-hole flange mount
Different flange dimensions available (see figure)P672 SMP shroud - limited detent straight 2-hole flange mount
P673 SMP shroud - smooth bore straight 2-hole flange mount
Thread-in P676 SMP shroud - Thread-in
Press-in P675 SMP press-in shroud Different detents available (see figure)
P769 SMP press-in shroud - Short Body
Field-replaceable P836 SMP (male) 2-hole flange mount (accepts 0.012” pin) Narrow flange version available (see figure)
Hermetics
P680 SMP (male) hermetic shroud - Short Body
Different detents and pin styles available
(see figure)
P682 SMP (male) hermetic shroud
P683 SMP (male) hermetic thread-in w/ mounting nut
P761 SMP (male) hermetic thread-in
Opens, Shorts, Loads
P918 SMP (female) 50 Ohm termination
P919 SMP (male) 50 Ohm termination
P930-1CC+SMP (female) Short
P931-1+SMP (female) Open
Bullets/Adapters
P617 SMP (female) to SMP (female) bullet Different lengths available (see figure)
P650 SMP (female) to SMP (female) bullet - short body
P912 SMP (male) bulkhead to SMP (male) catcher’s mitt
Different detents available (see figure)P914 SMP (male) to SMP (female) adapter
P916 SMP (male) to SMP (male) catcher’s mitt
P922 SMP (female) to SMP (female) spring loaded bullet See chart for available lengths
* All parts have a suffix. Please refer to figures for more information + These part numbers don’t require an additional suffix
© Carlisle Interconnect Technologies, 2012. All trademarks, service marks and trade names are property of their respective holding companies. All Rights Reserved.
Rev. 110812-3000
