MicreL, Inc. FEATURES SY10EL16V SY100EL16V SY10EL16V 5V/3.3V DIFFERENTIAL RECEIVER SY100EL16V DESCRIPTION 3.3V and 5V power supply options 250ps propagation delay High bandwidth output transitions Internal 75K input pull-down resistors The SY10/100EL16V are differential receivers. The devices are functionally equivalent to the E116 devices, with higher performance capabilities. With output transition times significantly faster than the E116, the EL16V is ideally suited for interfacing with high-frequency sources. The EL16V provides a VBB output for either singleended use or as a DC bias for AC coupling to the device. The VBB pin should be used only as a bias for the EL16V as its current sink/source capability is limited. Whenever used, the VBB pin should be bypassed to ground via a 0.01F capacitor. Under open input conditions (pulled to VEE), internal input clamps will force the Q output LOW. Replaces SY10/100EL16 Improved output waveform characteristics x3mm) MSOP and SOIC package Available in 8-pin (3x PIN NAMES Pin M9999-061306 hbwhelp@micrel.com or (408) 955-1690 Function D Data Inputs Q Data Outputs VBB Reference Voltage Output Rev.: I 1 Amendment: /1 Issue Date: June 2006 SY10EL16V SY100EL16V Micrel, Inc. PACKAGE/ORDERING INFORMATION Ordering Information(1) Package Type Operating Range Package Marking Lead Finish SY10EL16VKC K8-1 Commercial HEL16V Sn-Pb SY10EL16VKCTR(2) K8-1 Commercial HEL16V Sn-Pb SY100EL16VKC K8-1 Commercial XEL16V Sn-Pb SY100EL16VKCTR(2) K8-1 Commercial XEL16V Sn-Pb SY10EL16VZC Z8-1 Commercial HEL16V Sn-Pb SY10EL16VZCTR(2) Z8-1 Commercial XEL16V Sn-Pb SY100EL16VZC Z8-1 Commercial HEL16V Sn-Pb SY100EL16VZCTR(2) Z8-1 Commercial XEL16V Sn-Pb SY10EL16VKI K8-1 Industrial HEL16V Sn-Pb SY10EL16VKITR(2) K8-1 Industrial HEL16V Sn-Pb SY100EL16VKI K8-1 Industrial XEL16V Sn-Pb SY100EL16VKITR(2) K8-1 Industrial XEL16V Sn-Pb SY10EL16VZI Z8-1 Industrial HEL16V Sn-Pb SY10EL16VZITR(2) Z8-1 Industrial XEL16V Sn-Pb SY100EL16VZI Z8-1 Industrial HEL16V Sn-Pb SY100EL16VZITR(2) Z8-1 Industrial XEL16V Sn-Pb SY10EL16VKG(3) K8-1 Industrial H16V with Pb-Free bar-line indicator Pb-Free NiPdAu SY10EL16VKGTR(2, 3) K8-1 Industrial H16V with Pb-Free bar-line indicator Pb-Free NiPdAu SY100EL16VKG(3) K8-1 Industrial X16V with Pb-Free bar-line indicator Pb-Free NiPdAu SY100EL16VKGTR(2, 3) K8-1 Industrial X16V with Pb-Free bar-line indicator Pb-Free NiPdAu SY10EL16VZG(3) Z8-1 Industrial HEL16V with Pb-Free bar-line indicator Pb-Free NiPdAu SY10EL16VZGTR(2, 3) Z8-1 Industrial HEL16V with Pb-Free bar-line indicator Pb-Free NiPdAu SY100EL16VZG(2) Z8-1 Industrial XEL16V with Pb-Free bar-line indicator Pb-Free NiPdAu SY100EL16VZGTR(2, 3) Z8-1 Industrial XEL16V with Pb-Free bar-line indicator Pb-Free NiPdAu Part Number 8-Pin MSOP (K8-1) 8-Pin SOIC (Z8-1) Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. PRODUCT/PROCESS INFORMATION Process: Bipolar ESD Rating: Per Mil Std. 883 Human Body Model, >2.0kV (all pins). M9999-061306 hbwhelp@micrel.com or (408) 955-1690 2 SY10EL16V SY100EL16V MicreL, Inc. ABSOLUTE MAXIMUM RATINGS(1) Symbol Rating Value Unit VCC Power Supply Voltage (VEE = 0) +6.0 to 0 V VEE Power Supply Voltage (VCC = 0) -6.0 to 0 V VIN Input Voltage (VCC = 0V, VIN not more negative than VEE) Input Voltage (VEE = 0V, VIN not more positive than VCC) -6.0 to 0 +6.0 to 0 V V IOUT Output Current 50 100 mA TLEAD Lead Temperature Range (soldering, 20sec.) +260 C TA Operating Temperature Range -40 to +85 C Tstore Storage Temperature Range -65 to +150 C JA Thermal Resistance (Junction-to-Ambient) 160 109 C/W C/W JC Thermal Resistance (Junction-to-Case) 39 C/W ESD Mil Std. 883 Human Body Model, All Pins >2.0k V Note 1. -Continuous -Surge -Still Air -500lfpm Permanent device damage may occur if absolute maximum ratings are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to absolute maximum ratlng conditions for extended periods may affect device reliability. DC ELECTRICAL CHARACTERISTICS(1, 2) VEE = VEE (Min.) to VEE (Max.); VCC = GND TA = -40C Symbol IEE VBB IIH TA = 0C TA = +25C TA = +85C Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Power Supply Current 10EL 100EL -- -- 18 18 22 22 9 9 18 18 22 22 9 9 18 18 22 22 9 9 18 21 22 26 Output Reference Voltage 10EL 100EL -1.43 -1.38 -- -- -- -- -1.19 -1.26 -- -- -- 150 Input HIGH Current mA V Note 1. Parametric values specified at: Note 2. specification for packaged product only. M9999-061306 hbwhelp@micrel.com or (408) 955-1690 Unit -1.30 -1.38 -1.26 -1.38 150 -- -- -- -- 10/100EL16V Series: -1.27 -1.35 -1.26 -1.38 150 -- -3.0V to -5.5V. 3 -- -- -- -1.25 -1.31 -1.26 -1.38 150 -- A SY10EL16V SY100EL16V Micrel, Inc. AC ELECTRICAL CHARACTERISTICS(1, 5) VEE = VEE (Min.) to VEE (Max.); VCC = GND TA = -40C Symbol tPD tskew Parameter TA = 0C TA = +25C TA = +85C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit Propagation Delay to Output D (Diff) D (SE) 125 75 250 250 375 425 175 125 250 250 325 375 175 125 250 250 325 375 205 155 280 280 355 405 Duty Cycle Skew(2) (Diff) ps -- 5 -- -- 5 20 -- 5 20 -- 5 20 ps Minimum Input Swing(3) 150 -- -- 150 -- -- 150 -- -- 150 -- -- mV VCMR Common Mode Range(4) -1.3 -- -0.4 -1.4 -- -0.4 -1.4 -- -0.4 -1.4 -- -0.4 V tr tf Output Rise/Fall Times Q (20% to 80%) 100 225 350 100 225 350 100 225 350 100 225 350 ps VPP Note 1. Parametric values specified at: 10/100EL16V Series: -3.0V to -5.5V. Note 2. Duty cycle skew is the difference between a tPLH and tPHL propagation delay through a device. Note 3. Minimum input swing for which AC parameters are guaranteed. The device has a DC gain of 40. Note 4. The CMR range is referenced to the most positive side of the differential input signal. Normal operation is obtained if the HIGH level falls within the specified range and the peak-to-peak voltage lies between VPP min. and 1V. The lower end of the CMR range varies 1:1 with VEE. The numbers in the spec table assume a nominal VEE = -3.3V. Note for PECL operation, the VCMR (min) will be fixed at 3.3V - |VCMR (min)|. Note 5. Specification for packaged product only. M9999-061306 hbwhelp@micrel.com or (408) 955-1690 4 SY10EL16V SY100EL16V MicreL, Inc. 8-PIN MSOP (K8-1) Rev. 01 Package Notes: Note 1. Package meets Level 1 moisture sensitivity. M9999-061306 hbwhelp@micrel.com or (408) 955-1690 5 SY10EL16V SY100EL16V Micrel, Inc. 8-PIN SOIC(Z8-1) Rev. 03 Package Notes: Note 1. Package meets Level 1 moisture sensitivity. MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. (c) 2006 Micrel, Incorporated. M9999-061306 hbwhelp@micrel.com or (408) 955-1690 6