254
ALUMINUM ELECTROLYTIC CAPACITORS
CAT.8100H
UCY Miniature Sized, High Ripple Current,
High Reliability
High ripple current and Long Life product withstanding
load life of 10000 to 12000 hours at +105°C.
Suited for ballast application.
Compliant to the RoHS directive (2011/65/EU).
AEC-Q200 compliant. Please contact us for details.
U
1
C
2
Y
3
2
4
E
5
1
6
0
7
1
8
M
9 10 11
Capacitance tolerance (±20%)
Rated capacitance (100µF)
Rated voltage (250V)
H D
12
T
Size code
Series name
Type
φD
P
10
5.0
12.5
5.0
16
7.5
18
7.5
φd 0.6 0.6 0.8 0.8
L + 1.5 MAX. 15 MIN 4MIN
Radial Lead Type
Sleeve (P.E.T.) φd
Pressure
relief vent
Type numbering system (Example : 250V 100µF)
Configuration
φD+0.5MAX.
P±0.5
φ D
10
Pb-free leadwire
Pb-free PET sleeve
PD
12.5 to 18 HD
Configuration
(mm)
Dimension table in next page.
Please refer to page 20, 21, 22 about the formed or taped product spec.
Please refer to page 4 for the minimum order quantity.
Specifications
Category Temperature Range
Rated Voltage Range
Rated Capacitance Range
Capacitance Tolerance
Leakage Current
Tangent of loss angle (tan δ)
Stability at Low Temperature
Endurance
Shelf Life
Marking
Performance CharacteristicsItem
–40 to +105°C (160 to 400V), –25 to +105°C (420 to 500V)
160 to 500V
6.8 to 680µF
± 20% at 120Hz, 20°C
After 1 minute's application of rated voltage at 20°C, leakage current is not more than 0.04CV+100 (µA)
Printed with white color letter on dark brown sleeve.
After storing the capacitors under no load at 105˚C for 1000 hours and then performing voltage treatment based on JIS C
5101-4 clause 4.1 at 20°C, they shall meet the specified values for the endurance characteristics listed above.
Measurement frequency : 120Hz
Capacitance change
Leakage current
The specifications listed at right shall be met when the
capacitors are restored to 20˚C after D.C. bias plus rated
ripple current is applied for 12000 hours (10000 hours for 20L
or less, 500V) at 105˚C, the peak voltage shall not exceed the
rated voltage.
tan δ
Within ±20% of the initial capacitance value
Less than or equal to the initial specified value
200% or less than the initial specified value
Z–25°C / Z+20°C
Z–40°C / Z+20°C
Rated voltage (V)
Impedance ratio ZT / Z20 (MAX.)
160
3
6
200
3
6
250
3
6
350
5
6
400
5
6
420
6
--
450
6
--
500
6
--
Measurement frequency : 120Hz at 20°C
Rated voltage (V)
tan δ (MAX.)
160
0.20
200
0.20
250
0.20
400
0.24
420
0.24
450
0.24
500
0.24
350
0.24
UCY
UCS
Smaller
• Please refer to page 20 about the end seal configuration.
Long Life
ULD