* 10 WATTS OUTPUT POWER * 2:1 AND 4:1 WIDE INPUT VOLTAGE RANGE * INTERNATIONAL SAFETY STANDARD APPROVAL * SIX-SIDED CONTINUOUS SHIELD * HIGH EFFICIENCY UP TO 86% * STANDARD 2" X 1" X 0.4" PACKAGE * FIXED SWITCHING FREQUENCY The FDC10 and FDC10-W series offer 10 watts of output power from a 2 x 1 x 0.4 inch package. FDC10 series have 21 wide input voltage of 9-18, 18-36 and 36-75VDC. FDC10-W series have 4:1 ultra wide input voltage of 9-36 and 18-75VDC. The FDC10 and FDC10-W features 1600VDC of isolation, short-circuit and over-voltage protection, as well as six sided shielding. The safety approval of EN60950 and UL1950. All models are particularly suited to telecommunications, industrial, mobile telecom and test equipment applications. According the extended operation temperature range, there are "M1" and "M2" version for special application. UL E193009 TUV R2054609 CB JPTUV-001422 CE MARK T E C H N I C A L S P E C I F I C AT I O N All specifications are typical at nominal input, full load and 25C otherwise noted. OUTPUT SPECIFICATIONS GENERAL SPECIFICATIONS Output power 10 Watts max Voltage accuracy Full load and nominal Vin 2% Minimum load (Note 1) Line regulation 10% of FL LL to HL at Full Load Single Dual Load regulation 10% to 100% FL Cross regulation Asymmetrical load 25% / 100% FL Ripple and noise Single Dual 20MHz bandwidth Transient response recovery time 25% load step change 3.3V output Over voltage protection 5V output Zener diode clamp 12V output 15V output Over load protection Short circuit protection Input filter 300pF, max 5% Approvals and standard 50mVp-p 75mVp-p 500uS 9 - 18VDC 18 - 36VDC 36 - 75VDC 9 - 36VDC 18 - 75VDC Pi type 12V input Input surge voltage 24V input 100mS max 48V input Input reflected ripple (Note 2) Nominal Vin and full load 36VDC 50VDC 100VDC 30mAp-p Start up time 20mS typ Nominal Vin and constant resistor load Remote ON/OFF (Note 3) (Positive logic) DC-DC ON DC-DC OFF (Negative logic) DC-DC ON DC-DC OFF Remote off input current Nominal Vin 9 300KHz, typ INPUT SPECIFICATIONS Input voltage range 10 ohms, min Switching frequency Hiccup, automatics recovery 12V nominal input 24V nominal input 48V nominal input FDC10-W 24V nominal input 48V nominal input Isolation resistance Isolation capacitance 150% typ FDC10 1600VDC, min 1% 3.9V 6.2V 15V 18V % of FL at nominal input See table Isolation voltage 1% 2% 0.02% / C, max Temperature coefficient Efficiency Open or 3.5V < Vr < 12V Short or 0V < Vr < 1.2V Short or 0V < Vr < 1.2V Open or 3.5V < Vr < 12V 2.5mA IEC60950, UL1950, EN60950 Case material Nickel-coated copper Base material Non-conductive black plastic Potting material Epoxy (UL94-V0) 2.00 X 1.00 X 0.40 Inch (50.8 X 25.4 X 10.2 mm) Dimensions Weight 27g (0.95oz) 6 MTBF (Note 4) 1.976 x 10 hrs ENVIRONMENTAL SPECIFICATIONS Standard -25C ~ +85C (with derating) Operating temperature range M1 (Note 5) -40C ~ +85C (non-derating) (Reference derating curve) M2 (W series) -40C ~ +85C (with derating) Maximum case temperature +100C Storage temperature range Thermal impedance (Note 6) -55C ~ +105C Nature convection Nature convection with heat-sink Thermal shock 12C/watt 10C/watt MIL-STD-810D Vibration 10~55Hz, 2G, 30minutes along X,Y and Z Relative humidity 5% to 95% RH EMC CHARACTERISTICS Conducted emissions EN55022 Level A Radiated emissions EN55022 Level A ESD EN61000-4-2 Perf. Criteria2 Radiated immunity EN61000-4-3 Perf. Criteria2 Fast transient EN61000-4-4 Perf. Criteria2 Surge EN61000-4-5 Perf. Criteria2 Conducted immunity EN61000-4-6 Perf. Criteria2 (8) Model Number Input Range Output Voltage Output Current Input (7) Current Eff (%) Capacitor (9) Load max FDC10-12S33 FDC10-12S05 FDC10-12S12 FDC10-12S15 FDC10-12D05 FDC10-12D12 FDC10-12D15 FDC10-24S33 FDC10-24S05 (W) FDC10-24S12 (W) FDC10-24S15 (W) FDC10-24D05 (W) FDC10-24D12 (W) FDC10-24D15 (W) FDC10-48S33 FDC10-48S05 (W) FDC10-48S12 (W) FDC10-48S15 (W) FDC10-48D05 (W) FDC10-48D12 (W) FDC10-48D15 (W) 9 - 18 VDC 9 - 18 VDC 9 - 18 VDC 9 - 18 VDC 9 - 18 VDC 9 - 18 VDC 9 - 18 VDC 18 - 36 VDC 18 - 36 (9 - 36) VDC 18 - 36 (9 - 36) VDC 18 - 36 (9 - 36) VDC 18 - 36 (9 - 36) VDC 18 - 36 (9 - 36) VDC 18 - 36 (9 - 36) VDC 36 - 75 VDC 36 - 75 (18 - 75) VDC 36 - 75 (18 - 75) VDC 36 - 75 (18 - 75) VDC 36 - 75 (18 - 75) VDC 36 - 75 (18 - 75) VDC 36 - 75 (18 - 75) VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 5 VDC 12 VDC 15 VDC 2000mA 2000mA 830mA 670mA 1000mA 416mA 333mA 2000mA 2000mA 830mA 670mA 1000mA 416mA 333mA 2000mA 2000mA 830mA 670mA 1000mA 416mA 333mA 724mA 1082mA 1064mA 1088mA 1068mA 1053mA 1041mA 362mA 534 (548mA) 519 (532mA) 523 (551mA) 548 (548mA) 520 (547mA) 520 (548mA) 183mA 260 (274mA) 253 (259mA) 258 (262mA) 267 (271mA) 254 (281mA) 260 (270mA) 80 81 82 81 82 83 84 80 82 (80) 84 (82) 84 (80) 80 (80) 84 (80) 84 (80) 79 84 (80) 86 (84) 85 (84) 82 (81) 86 (78) 84 (81) 6800uF 4700uF 690uF 470uF 680uF 330uF 110uF 6800uF 4700uF 690uF 470uF 680uF 330uF 110uF 6800uF 4700uF 690uF 470uF 680uF 330uF 110uF Note FDC10-48S05 Derating Curve 100 75 50 Nature convection 25 0 -40 -25 -10 0 50 Nature convection 25 0 -40 -25 -10 0 50 60 70 80 90 100 AMBIENT TEMPERATURE (C) COMMON - OUTPUT CTRL (Option) 0.50 (12.7) 0.40 (10.2) 0.40 (10.2) Nature convection 0.40 (10.2) 25 50 60 70 80 90 100 AMBIENT TEMPERATURE (C) EFFICIENCY (%) OUTPUT POWER (%) 50 + INPUT - INPUT + OUTPUT 75 FDC10-48S05-M2 Derating Curve 75 + INPUT - INPUT + OUTPUT NO PIN - OUTPUT CTRL (Option) 1.00(25.4) 100 AMBIENT TEMPERATURE (C) 100 1 2 3 4 5 6 FDC10-48S05-M1 Derating Curve 0 -40 -25 -10 0 50 60 70 80 90 100 DUAL DIA. 0.04(1.0) OUTPUT POWER (%) 6. 7. 8. 9. SINGLE FDC10-48S05 Efficiency VS Output load 82 81 80 79 78 77 76 75 70 65 50 3 4 5 Bottom View 1 2 6 0.80(20.3) 5. PIN CONNECTION PIN 0.60(15.2) 4. 2.00(50.8) 2. 3. The FDC10 (W) series required a minimum 10% loading on the output to maintain specified regulation. Operation under no-load condition will not damage these devices, however they may not meet all listed specification Simulated source impedance of 12uH. 12uH inductor in series with +Vin. The ON/OFF control is option function. There are positive logic and negative logic. The pin voltage is referenced to negative input To order positive logic ON-OFF control add the suffix-P (Ex: FDC10-24S05-P) To order negative logic ON-OFF control add the suffix-N (Ex: FDC10-24S05-N) BELLCORE TR-NWT-000332. Case I: 50% Stress, Temperature at 40C. (Ground fixed and controlled environment) M1 version is more efficient, therefore, it can be operated in a more extensive temperature range than standard and M2 version. Heat sink is optional and P/N: 7G-0020A. Maximum value at nominal input voltage and full load of standard type. Typical value at nominal input voltage and full load. Test by minimum Vin and constant resistor load. OUTPUT POWER (%) 1. 0.10(2.5) 0.20(5.1) 0.5 1 1.25 1.5 OUTPUT LOAD (A) 1.75 2 1. All dimensions in Inches (mm) 2. Pin Pitch tolerance 0.014(0.35) 0.22(5.6)