D WIMA DC-LINK MKP 4 Metallized Polypropylene (PP) - Capacitors for DC-Link Applications. Capacitances from 1.0 mF to 400 mF. Rated Voltages from 400 VDC to 1300 VDC. Special Features Electrical Data Capacitances up to 400 mF High volume/capacitance ratio Excellent self-healing properties Very low dissipation factor High reliability 2-pin and 4-pin contact configuration (plate versions on request) AEC-Q200 qualified According to RoHS 2011/65/EU Typical Applications As intermediate circuit capacitor e.g. in high power converter technology, power supplies, solar inverters etc. Construction Dielectric: Polypropylene (PP) film Capacitor electrodes: Vacuum-deposited Internal construction: Plastic film Vacuum-deposited electrode Metal contact layer (schoopage) Termination PCM 1 kHz 10 kHz 27.5 37.5 52.5 15 x 10 -4 30 x 10-4 50 x 10 -4 160 x 10 -4 210 x 10 -4 260 x 10 -4 Voltage and current derating: A derating factor of 1.35% per K must be applied from +85 C for DC voltages and from +70 C for AC currents (Irms). Additionally a derating factor of 4.5% per K must be applied from +85 C for AC currents (I rms) Reliability: Operational life 100 000 hours (Ur and 70) C) Failure rate l 0 (0.5 x Ur and 40) C) P = CN [mF] x U r [V] l0 P 10 000 10 000 < P 25 000 25 000 < P 50 000 50 000 < P 100 000 P > 100 000 < < < < < 2 5 10 20 30 fit fit fit fit fit Insulation resistance at +20+ C: 30 000 sec (M x mF) Measuring voltage: 100 V/1 min. Test voltage: 1.2 Ur, 2sec Dielectric absorption: 0.05 % Specific dissipation: Box size Specific dissipation in Watts per K W x H x L in mm above the ambient temperature 9 x 19 x 31.5 11 x 21 x 31.5 13 x 24 x 31.5 15 x 26 x 31.5 17 x 29 x 31.5 27 x 15 x 41.5 17 x 34.5 x 31.5 20 x 39.5 x 31.5 19 x 32 x 41.5 20 x 39.5 x 41.5 24 x 45.5 x 41.5 31 x 46 x 41.5 35 x 50 x 41.5 40 x 55 x 41.5 35 x 50 x 57 45 x 55 x 57 45 x 65 x 57 0.021 0.025 0.030 0.034 0.039 0.043 0.044 0.053 0.054 0.065 0.080 0.092 0.106 0.123 0.132 0.164 0.184 Packing Packing units at the end of the catalogue For further details and graphs please refer to Technical Information. Maximum pulse rise time: PCM 27.5 37.5 52.5 max. pulse rise time V/msec at TA < 40) C 400 VDC 500 VDC 600 VDC 800 VDC 900 VDC 1100 VDC 1300 VDC 11 8 5 15 10 7 27 19 13 29 21 15 35 22 18 43 29 21 50 35 25 for pulses equal to the rated voltage 01.19 Encapsulation: Solvent-resistant, flame-retardant plastic case with epoxy resin seal, UL 94 V-0 Terminations: Tinned wire (plate versions on request). Marking: Colour: Red. Marking: Black. Capacitance range: 1 mF to 400 mF (intermediate values on request) Rated voltages: 400 VDC, 500 VDC, 600 VDC, 800 VDC, 900 VDC, 1100 VDC, 1300 VDC Capacitance tolerances: 20%, 10%, 5% Operating temperature range: -55+ C to +105+ C (hot spot including self-heating) Climatic test category: 55/085/56 in accordance with IEC Dissipation factors at +20 C: 122 D WIMA WIMA DC-LINK FKP 4 MKP 4 Continuation General Data Capacitance W H L PCM** Pin 1 mF 2 3 4 5 7 10 mF 15 20 25 30 40 50 60 70 80 90 100 mF 120 140 150 160 180 190 200 220 250 270 300 330 350 370 400 9 9 9 9 9 9 11 13 15 17 17 20 20 20 24 24 24 31 31 35 35 40 40 40 40 35 45 45 45 45 45 45 45 19 19 19 19 19 19 21 24 26 29 34.5 39.5 39.5 39.5 45.5 45.5 45.5 46 46 50 50 55 55 55 55 50 55 55 55 65 65 65 65 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 57 57 57 57 57 57 57 57 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 2 2 2 2 2 2 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 4 4 4 4 4 4 4 4 400 VDC (70 C) / 300 VDC (85 C) IS Irms*(10 kHz)* ESR (10 kHz)* A A m 11 22 33 44 55 77 110 165 220 275 330 440 400 480 560 640 720 800 960 1120 1200 1280 1440 1520 1600 1100 1250 1350 1500 1650 1750 1850 2000 1 1.5 1.5 2 2 2.5 3.5 4.5 5.5 6.5 7 9.5 11 11.5 15 17 17.5 19 20 22.5 23 28 29.5 31.5 32.5 27 32 33.5 35 37 40 41.5 43 238.7 119.4 79.6 59.7 47.7 34.1 23.9 15.9 11.9 9.5 8 6 5.4 4.8 3.6 2.7 2.6 2.5 2.3 2.1 2 1.6 1.4 1.2 1.2 1.8 1.6 1.5 1.3 1.2 1.1 1.1 1 Part number DCP4G041006A_ _ _ _ _ _ DCP4G042006A_ _ _ _ _ _ DCP4G043006A_ _ _ _ _ _ DCP4G044006A_ _ _ _ _ _ DCP4G045006A_ _ _ _ _ _ DCP4G047006A_ _ _ _ _ _ DCP4G051006B_ _ _ _ _ _ DCP4G051506D_ _ _ _ _ _ DCP4G052006F_ _ _ _ _ _ DCP4G052506G_ _ _ _ _ _ DCP4G053006I_ _ _ _ _ _ DCP4G054006J_ _ _ _ _ _ DCP4G055007G_ _ _ _ _ _ DCP4G056007G_ _ _ _ _ _ DCP4G057007H_ _ _ _ _ _ DCP4G058007H_ _ _ _ _ _ DCP4G059007H_ _ _ _ _ _ DCP4G061007I_ _ _ _ _ _ DCP4G061207I_ _ _ _ _ _ DCP4G061407J_ _ _ _ _ _ DCP4G061507J_ _ _ _ _ _ DCP4G061607K_ _ _ _ _ _ DCP4G061807K_ _ _ _ _ _ DCP4G061907K_ _ _ _ _ _ DCP4G062007K_ _ _ _ _ _ DCP4G062209F_ _ _ _ _ _ DCP4G062509H_ _ _ _ _ _ DCP4G062709H_ _ _ _ _ _ DCP4G063009H_ _ _ _ _ _ DCP4G063309J_ _ _ _ _ _ DCP4G063509J_ _ _ _ _ _ DCP4G063709J_ _ _ _ _ _ DCP4G064009J_ _ _ _ _ _ 2-pin version * General guide PCM * Permissible I rms at 10 C internal temperature rise (general guide) d 27.5 0.8 37.5 1 ** PCM = Printed circuit module = pin spacing Dims. in mm. W PCM b Part number completion: Version code: 2-pin 4-pin Tolerance: 20 % 10 % 5 % Packing: bulk Pin length: 6-2 = = = = = = = D2 D4 M K J S SD pin 4-pin version Taped version see page 149. Rights reserved to amend design data without prior notification. pin c pin c 11 13 15 17 20 20 24 31 35 40 35 45 27.5 5 27.5 7.5 27.5 7.5 27.5 10 27.5 12.5 37.5 12.5 37.5 12.5 37.5 20 37.5 20 37.5 20 52.5 20 52.5 20 d c 0.8 0.8 0.8 0.8 0.8 1 1 1 1 1 1.2 1.2 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.8 0.8 01.19 Continuation page 124 123 D WIMA WIMADC-LINK FKP 4 MKP 4 Continuation General Data Capacitance W H L PCM** Pin 1 mF 2 3 5 7 8 10 mF 12 15 20 22 25 30 35 40 9 9 9 9 11 13 13 15 17 17 20 20 20 20 20 24 24 24 24 31 31 31 31 31 35 35 35 35 35 40 35 40 35 40 35 35 35 45 45 45 45 45 45 45 45 19 19 19 19 21 24 24 26 29 34.5 39.5 39.5 39.5 39.5 39.5 45.5 45.5 45.5 45.5 46 46 46 46 46 50 50 50 50 50 55 50 55 50 55 50 50 50 55 55 55 55 55 55 65 65 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 57 41.5 57 41.5 57 41.5 57 57 57 57 57 57 57 57 57 57 57 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 52.5 37.5 52.5 37.5 52.5 37.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 2 2 2 2 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 4 2/4 4 2/4 4 2/4 4 4 4 4 4 4 4 4 4 4 4 45 50 55 60 65 70 75 80 85 90 95 100 mF 110 120 130 140 150 160 170 180 190 200 210 220 240 500 VDC (70 C) / 400 VDC (85 C) IS Irms*(10 kHz)* ESR (10 kHz)* A A m 15 30 45 75 105 120 150 180 225 300 330 375 300 350 400 400 450 500 550 600 650 700 750 800 850 900 950 1000 700 1100 770 1200 840 1300 910 980 1050 1120 1190 1260 1330 1400 1470 1540 1680 1 1.5 1.5 2.5 3 3 4 4 5 6 7 7.5 9 8.5 10 10 12.5 13 14 14 16.5 18 17 18 10.5 21 21.5 24 18 19 19 22.5 20 23 21 21.5 22.5 25.5 26.5 27 28 28.5 29.5 32 33.5 238.7 119.4 79.6 47.7 34.1 29.8 23.9 19.9 15.9 11.9 10.9 9.5 7.9 9.1 5.7 8 5 4.8 4 4.7 3.3 2.9 3.2 2.8 3.2 2.4 2.2 1.9 4 2.9 3.6 2.7 3.3 2.4 3.1 2.8 2.7 2.5 2.3 2.2 2.1 2 1.9 1.8 1.7 Part number DCP4H141006A_ _ _ _ _ _ DCP4H142006A_ _ _ _ _ _ DCP4H143006A_ _ _ _ _ _ DCP4H145006A_ _ _ _ _ _ DCP4H147006B_ _ _ _ _ _ DCP4H148006D_ _ _ _ _ _ DCP4H151006D_ _ _ _ _ _ DCP4H151206F_ _ _ _ _ _ DCP4H151506G_ _ _ _ _ _ DCP4H152006I_ _ _ _ _ _ DCP4H152206J_ _ _ _ _ _ DCP4H152506J_ _ _ _ _ _ DCP4H153007G_ _ _ _ _ _ DCP4H153507G_ _ _ _ _ _ DCP4H154007G_ _ _ _ _ _ DCP4H154007H_ _ _ _ _ _ DCP4H154507H_ _ _ _ _ _ DCP4H155007H_ _ _ _ _ _ DCP4H155507H_ _ _ _ _ _ DCP4H156007I_ _ _ _ _ _ DCP4H156507I_ _ _ _ _ _ DCP4H157007I_ _ _ _ _ _ DCP4H157507I_ _ _ _ _ _ DCP4H158007I_ _ _ _ _ _ DCP4H158507J_ _ _ _ _ _ DCP4H159007J_ _ _ _ _ _ DCP4H159507J_ _ _ _ _ _ DCP4H161007J_ _ _ _ _ _ DCP4H161009F_ _ _ _ _ _ DCP4H161107K_ _ _ _ _ _ DCP4H161109F_ _ _ _ _ _ DCP4H161207K_ _ _ _ _ _ DCP4H161209F_ _ _ _ _ _ DCP4H161307K_ _ _ _ _ _ DCP4H161309F_ _ _ _ _ _ DCP4H161409F_ _ _ _ _ _ DCP4H161509F_ _ _ _ _ _ DCP4H161609H_ _ _ _ _ _ DCP4H161709H_ _ _ _ _ _ DCP4H161809H_ _ _ _ _ _ DCP4H161909H_ _ _ _ _ _ DCP4H162009H_ _ _ _ _ _ DCP4H162109H_ _ _ _ _ _ DCP4H162209J_ _ _ _ _ _ DCP4H162409J_ _ _ _ _ _ * General guide * Permissible I rms at 10 C internal temperature rise (general guide) ** PCM = Printed circuit module = pin spacing Dims. in mm. Rights reserved to amend design data without prior notification. 01.19 Continuation page 125 124 D WIMA WIMA DC-LINK FKP 4 MKP 4 Continuation General Data Capacitance W H L PCM** Pin 2 mF 5 7 10 mF 9 13 15 17 27 17 20 20 20 24 24 31 31 35 35 35 40 35 40 35 40 35 40 35 35 35 45 45 45 45 45 45 45 45 19 24 26 29 15 34.5 39.5 39.5 39.5 45.5 45.5 46 46 50 50 50 55 50 55 50 55 50 55 50 50 50 55 55 55 65 65 65 65 65 31.5 31.5 31.5 31.5 41.5 31.5 31.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 57 41.5 57 41.5 57 41.5 57 57 57 57 57 57 57 57 57 57 57 27.5 27.5 27.5 27.5 37.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 52.5 37.5 52.5 37.5 52.5 37.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 2 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 4 2/4 4 2/4 4 2/4 4 4 4 4 4 4 4 4 4 4 4 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 mF 110 115 120 130 140 150 600 VDC (70 C) / 450 VDC (85 C) IS Irms (10 kHz)* ESR (10 kHz)* A A m 54 135 189 270 190 405 540 380 475 570 665 760 855 950 1045 1140 1235 845 1330 910 1425 975 1520 1040 1105 1170 1235 1300 1430 1495 1560 1690 1820 1950 * General guide 2 3.5 4.5 6 6.5 7.5 9 10 11.5 14 14.5 16.5 17 19 17 17.5 19.5 20 20 20.5 20.5 21 22 22 22.5 23.5 24 25 26.5 27.5 28 29.5 31 33 56 22 16 11 10 7.4 6.2 6.2 5 4.1 3.8 3.3 3.2 2.9 3.8 3.4 3.3 3.3 3.1 3.1 3 3 2.6 2.6 2.1 1.9 2.8 2.6 2.3 2.5 2.3 2.1 1.9 1.7 Part number DCP4I042006A_ _ _ _ _ _ DCP4I045006D_ _ _ _ _ _ DCP4I047006F_ _ _ _ _ _ DCP4I051006G_ _ _ _ _ _ DCP4I051007M_ _ _ _ _ _ DCP4I051506I_ _ _ _ _ _ DCP4I052006J_ _ _ _ _ _ DCP4I052007G_ _ _ _ _ _ DCP4I052507G_ _ _ _ _ _ DCP4I053007H_ _ _ _ _ _ DCP4I053507H_ _ _ _ _ _ DCP4I054007I_ _ _ _ _ _ DCP4I054507I_ _ _ _ _ _ DCP4I055007J_ _ _ _ _ _ DCP4I055507J_ _ _ _ _ _ DCP4I056007J_ _ _ _ _ _ DCP4I056507K_ _ _ _ _ _ DCP4I056509F_ _ _ _ _ _ DCP4I057007K_ _ _ _ _ _ DCP4I057009F_ _ _ _ _ _ DCP4I057507K_ _ _ _ _ _ DCP4I057509F_ _ _ _ _ _ DCP4I058007K_ _ _ _ _ _ DCP4I058009F_ _ _ _ _ _ DCP4I058509F_ _ _ _ _ _ DCP4I059009F_ _ _ _ _ _ DCP4I059509H_ _ _ _ _ _ DCP4I061009H_ _ _ _ _ _ DCP4I061109H_ _ _ _ _ _ DCP4I061159J_ _ _ _ _ _ DCP4I061209J_ _ _ _ _ _ DCP4I061309J_ _ _ _ _ _ DCP4I061409J_ _ _ _ _ _ DCP4I061509J_ _ _ _ _ _ 2-pin version PCM d ** PCM = Printed circuit module = pin spacing 27.5 0.8 37.5 1 Dims. in mm. Part number completion: Version code: 2-pin 4-pin Tolerance: 20 % 10 % 5 % Packing: bulk Pin length: 6-2 = = = = = = = W PCM b D2 D4 M K J S SD pin 4-pin version 01.19 Taped version see page 149. pin Rights reserved to amend design data without prior notification. Continuation page 126 c pin c 11 13 15 17 20 19 20 24 27 31 35 40 35 45 27.5 5 27.5 7.5 27.5 7.5 27.5 10 27.5 12.5 37.5 10 37.5 12.5 37.5 12.5 37.5 20 37.5 20 37.5 20 37.5 20 52.5 20 52.5 20 d c 0.8 0.8 0.8 0.8 0.8 1 1 1 1 1 1 1 1.2 1.2 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.8 0.8 125 D WIMA WIMA DC-LINK FKP 4 MKP 4 Continuation General Data Capacitance W H L PCM** Pin 2 mF 5 7 10 mF 15 65 70 75 80 85 90 95 100 mF 110 115 9 13 17 17 20 20 20 24 24 31 31 35 35 40 35 40 35 35 45 45 45 45 45 45 45 45 45 19 24 29 34.5 39.5 39.5 39.5 45.5 45.5 46 46 50 50 55 50 55 50 50 55 55 55 65 65 65 65 65 65 31.5 31.5 31.5 31.5 31.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 57 41.5 57 57 57 57 57 57 57 57 57 57 57 27.5 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 52.5 37.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 2 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 4 2/4 4 4 4 4 4 4 4 4 4 4 4 Capacitance W H L PCM** Pin 2 mF 5 7 10 mF 11 17 17 20 20 20 24 31 31 35 40 35 35 35 35 45 45 45 45 45 45 21 29 34.5 39.5 39.5 39.5 45.5 46 46 50 55 50 50 50 50 55 55 55 65 65 65 31.5 31.5 31.5 31.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 57 57 57 57 57 57 57 57 57 57 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 37.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 4 4 4 4 4 4 4 4 4 4 20 25 30 35 40 45 50 55 60 15 20 25 30 35 40 45 50 55 60 65 70 75 80 800 VDC (70 C) / 700 VDC (85 C) IS I rms (10 kHz)* ESR (10 kHz)* A A m 58 2 52 145 4 21 203 5 15 290 6.5 10 435 9 6.9 315 9.5 6.9 420 10 6.2 525 12.5 5 630 14 4.1 735 15.5 3.8 840 16.5 3.3 945 17.5 3.4 1050 19 3 1155 19.5 3.2 825 20.4 3.2 1260 20.5 2.9 900 21.5 2.9 975 22.5 2.2 1050 23.5 3 1125 24 2.9 1200 24.5 3 1275 25 2.6 1350 25.5 2.5 1425 26 2.4 1500 26.5 2.3 1650 27.5 2.2 1725 28 2.1 900 VDC (70 C) / 760 VDC (85 C) IS I rms (10 kHz)* ESR (10 kHz)* A A m 70 2.5 44 175 4.5 18 245 6 13 350 8 8.8 220 8.5 8.8 330 10.5 5.8 440 13 4.8 550 15.5 3.8 3.7 660 15.5 770 18 3.2 880 19.5 3.2 720 20.5 3.2 810 21 2.8 900 22 3.3 990 22.5 3.2 990 22.5 3.2 1080 23 3 1170 24 2.9 1260 24.5 3.3 1350 25 2.9 1440 25.5 2.8 Part number DCP4L042006A_ _ _ _ _ _ DCP4L045006D_ _ _ _ _ _ DCP4L047006G_ _ _ _ _ _ DCP4L051006I_ _ _ _ _ _ DCP4L051506J_ _ _ _ _ _ DCP4L051507G_ _ _ _ _ _ DCP4L052007G_ _ _ _ _ _ DCP4L052507H_ _ _ _ _ _ DCP4L053007H_ _ _ _ _ _ DCP4L053507I_ _ _ _ _ _ DCP4L054007I_ _ _ _ _ _ DCP4L054507J_ _ _ _ _ _ DCP4L055007J_ _ _ _ _ _ DCP4L055507K_ _ _ _ _ _ DCP4L055509F_ _ _ _ _ _ DCP4L056007K_ _ _ _ _ _ DCP4L056009F_ _ _ _ _ _ DCP4L056509F_ _ _ _ _ _ DCP4L057009H_ _ _ _ _ _ DCP4L057509H_ _ _ _ _ _ DCP4L058009H_ _ _ _ _ _ DCP4L058509J_ _ _ _ _ _ DCP4L059009J_ _ _ _ _ _ DCP4L059509J_ _ _ _ _ _ DCP4L061009J_ _ _ _ _ _ DCP4L061109J_ _ _ _ _ _ DCP4L061159J_ _ _ _ _ _ Part number DCP4N042006B_ _ _ _ _ _ DCP4N045006G_ _ _ _ _ _ DCP4N047006I_ _ _ _ _ _ DCP4N051006J_ _ _ _ _ _ DCP4N051007G_ _ _ _ _ _ DCP4N051507G_ _ _ _ _ _ DCP4N052007H_ _ _ _ _ _ DCP4N052507I_ _ _ _ _ _ DCP4N053007I_ _ _ _ _ _ DCP4N053507J_ _ _ _ _ _ DCP4N054007K_ _ _ _ _ _ DCP4N054009F_ _ _ _ _ _ DCP4N054509F_ _ _ _ _ _ DCP4N055009F_ _ _ _ _ _ DCP4N055509F_ _ _ _ _ _ DCP4N055509H_ _ _ _ _ _ DCP4N056009H_ _ _ _ _ _ DCP4N056509H_ _ _ _ _ _ DCP4N057009J_ _ _ _ _ _ DCP4N057509J_ _ _ _ _ _ DCP4N058009J_ _ _ _ _ _ Dims. in mm. 126 Rights reserved to amend design data without prior notification. Continuation page 127 01.19 * General guide ** PCM = Printed circuit module = pin spacing D WIMA DC-LINK MKP 4 Continuation General Data 1100 VDC (70 C) / 920 VDC (85 C) IS I rms (10 kHz)* ESR (10 kHz)* A A m Capacitance W H L PCM** Pin 2 3 5 7 13 15 17 20 19 20 31 31 35 40 35 35 45 45 45 45 45 24 26 34.5 39.5 32 39.5 46 46 50 55 50 50 55 55 65 65 65 31.5 31.5 31.5 31.5 41.5 41.5 41.5 41.5 41.5 41.5 57 57 57 57 57 57 57 27.5 27.5 27.5 27.5 37.5 37.5 37.5 37.5 37.5 37.5 52.5 52.5 52.5 52.5 52.5 52.5 52.5 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 2/4 4 4 4 4 4 4 4 Capacitance W H L PCM** Pin 2 mF 5 15 20 20 20 24 31 40 35 35 45 45 45 26 39.5 39.5 39.5 45.5 46 55 50 50 55 65 65 31.5 31.5 41.5 41.5 41.5 41.5 41.5 57 57 57 57 57 27.5 27.5 37.5 37.5 37.5 37.5 37.5 52.5 52.5 52.5 52.5 52.5 2/4 2/4 2/4 2/4 2/4 2/4 2/4 4 4 4 4 4 mF 10 mF 15 20 25 30 35 40 45 50 55 60 7 10 mF 15 20 25 30 35 40 86 129 215 301 203 290 435 580 580 725 630 735 840 945 1050 1150 1260 3 4 5.5 7.5 7.5 9.5 13 14 15 16.5 17.5 18 19 20 21 22 23 36 23 14 10 10 7.2 5.4 5.2 4.7 4.6 4.4 4 4.5 4.1 4.1 3.8 3.5 100 250 175 245 350 525 700 500 625 750 875 1000 3 6 7 8 10.5 14 17.5 18 19 20 21 22 36 14 14 10 7,2 4.8 4 4 3.6 4 4.1 3.7 Part number DCP4R242006F_ _ _ _ _ _ DCP4R245006J_ _ _ _ _ _ DCP4R245007G_ _ _ _ _ _ DCP4R247007G_ _ _ _ _ _ DCP4R251007H_ _ _ _ _ _ DCP4R251507I_ _ _ _ _ _ DCP4R252007K_ _ _ _ _ _ DCP4R252009F_ _ _ _ _ _ DCP4R252509F_ _ _ _ _ _ DCP4R253009H_ _ _ _ _ _ DCP4R253509J_ _ _ _ _ _ DCP4R254009J_ _ _ _ _ _ 2-pin version PCM d ** PCM = Printed circuit module = pin spacing 27.5 0.8 37.5 1 W PCM b Part number completion: Version code: 2-pin 4-pin Tolerance: 20 % 10 % 5 % Packing: bulk Pin length: 6-2 = = = = = = = D2 D4 M K J S SD pin 4-pin version Taped version see page 149. pin 01.19 DCP4P042006D_ _ _ _ _ _ DCP4P043006F_ _ _ _ _ _ DCP4P045006I_ _ _ _ _ _ DCP4P047006J_ _ _ _ _ _ DCP4P047007F_ _ _ _ _ _ DCP4P051007G_ _ _ _ _ _ DCP4P051507I_ _ _ _ _ _ DCP4P052007I_ _ _ _ _ _ DCP4P052007J_ _ _ _ _ _ DCP4P052507K_ _ _ _ _ _ DCP4P053009F_ _ _ _ _ _ DCP4P053509F_ _ _ _ _ _ DCP4P054009H_ _ _ _ _ _ DCP4P054509H_ _ _ _ _ _ DCP4P055009J_ _ _ _ _ _ DCP4P055509J_ _ _ _ _ _ DCP4P056009J_ _ _ _ _ _ 1300 VDC (70 C) / 1100 VDC (85 C) IS I rms (10 kHz)* ESR (10 kHz)* A A m * General guide Dims. in mm. Part number c pin c 11 13 15 17 20 19 20 24 31 35 40 35 45 27.5 5 27.5 7.5 27.5 7.5 27.5 10 27.5 12.5 37.5 10 37.5 12.5 37.5 12.5 37.5 20 37.5 20 37.5 20 52.5 20 52.5 20 d c 0.8 0.8 0.8 0.8 0.8 1 1 1 1 1 1 1.2 1.2 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.8 0.8 Rights reserved to amend design data without prior notification. 127 D Recommendation for Processing and Application of Through-Hole Capacitors Soldering Process Internal temperature of the capacitor must be kept as follows: Polyester: preheating: T max. T 125 C soldering: T max. T 135 C Polypropylene: preheating: Tmax. T 100 C soldering: T max. T 110 C Single wave soldering Soldering bath temperature: T P 260 C Dwell time: t P 5 sec Double wave soldering Soldering bath temperature: T P 260 C Dwell time: St P 5 sec Due to different soldering processes and heat requirements the graphs are to be regarded as a recommendation only. WIMA Quality and Environmental Philosophy ISO 9001:2015 Certification ISO 9001:2015 is an international basic standard of quality assurance systems for all branches of industry. The approval according to ISO 9001:2015 of our factories by the infaz (Institut fur Auditierung und Zertifizierung) certifies that organisation, equipment and monitoring of quality assurance in our factories correspond to internationally recognized standards. WIMA WPCS The WIMA Process Control System (WPCS) is a quality surveillance and optimization system developed by WIMA. WPCS is a major part of the quality-oriented WIMA production. Points of application during production process: incoming material inspection metallization film inspection schoopage pre-healing pin attachment cast resin preparation/ encapsulation " 100% final inspection " Testing as per customer requirements All WIMA capacitors, irrespective of whether through-hole devices or SMD, are made of environmentally friendly materials. Neither during manufacture nor in the product itself any toxic substances are used, e.g. - - - - - Lead PCB CFC Hydrocarbon chloride Chromium 6+ - - - - - PBB/PBDE Arsenic Cadmium Mercury etc. We merely use pure, recyclable materials for packing our components, such as: " " " " carton cardboard adhesive tape made of paper polystyrene We almost completely refrain from using packing materials such as: " adhesive tapes made of plastic " metal clips RoHS Compliance According to the RoHS Directive 2011/65/EU as amended from time to time certain hazardous substances like e.g. lead, cadmium, mercury must not be used any longer in electronic equipment as of July 1st, 2006. For the sake of the environment WIMA has refraind from using such substances since years already. WIMA Kondensatoren sind bleifrei konform RoHS 2011/65/EU WIMA capacitors are lead free in accordance with RoHS 2011/65/EU Tape for lead-free WIMA capacitors DIN EN ISO 14001:2004 WIMA's environmental management has been established in accordance with the guidelines of DIN EN ISO 14001:2004 to optimize the production processes with regard to energy and resources. 01.19 " " " " " " " WIMA Environmental Policy 15 D Typical Dimensions for Taping Configuration Vh P P2 Diagram 1: PCM 2.5/5/7.5mm W W1 W0 H H1 W2 P1 D0 d P t F P0 H1 P P1 H P1 d d P0 P2 F F Diagram 2: PCM 10/15 mm Diagram 3: PCM 22.5 and 27.5*mm *PCM 27.5 taping possible with two feed holes between components Designation Carrier tape width Dimensions for Radial Taping Symbol PCM 2.5 taping W P0 P2 18.0 p0.5 PCM 5 taping PCM 7.5 taping PCM 10 taping* PCM 15 taping* PCM 22.5 taping PCM 27.5 taping 18.0 p0.5 18.0 p0.5 18.0 p0.5 18.0 p0.5 18.0 p0.5 18.0 p0.5 for hot-sealing for hot-sealing for hot-sealing for hot-sealing for hot-sealing for hot-sealing for hot-sealing Hold-down tape width W0 6.0 6.0 12.0 12.0 12.0 12.0 12.0 adhesive tapeadhesive tapeadhesive tapeadhesive tapeadhesive tapeadhesive tapeadhesive tape Hole position W1 9.0 p0.5 9.0 p0.5 9.0 p0.5 9.0 p0.5 9.0 p0.5 9.0 p0.5 Hold-down tape position W2 0.5 to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max. 0.5 to 3.0 max. Feed hole diameter D0 4.0 p0.2 4.0 p0.2 4.0 p0.2 4.0 p0.2 4.0 p0.2 4.0 p0.2 12.7 p1.0 12.7 p1.0 12.7 p1.0 25.4 p1.0 25.4 p1.0 38.1 p1.5 4.0 p0.2 3*8.1 p1.5 or 50.8 p1.5 Pitch of component P Feed hole pitch P0 12.7 cumulative pitch p0.3 error max. 1.0 mm/20 pitch Feed hole centre to pin P1 5.1 p0.5 Hole centre to component centre P2 12.7 cumulative pitch p0.3 error max. 1.0 mm/20 pitch 12.7 cumulative pitch p0.3 error max. 1.0 mm/20 pitch 12.7 cumulative pitch p0.3 error max. 1.0 mm/20 pitch 12.7 cumulative pitch p0.3 error max. 1.0 mm/20 pitch 12.7 p0.3 9.0 p0.5 cumulative pitch error max. 1.0 mm/20 pitch 12.7 p0.3 cumulative pitch error max. 1.0 mm/20 pitch 3.85 p0.7 2.6 p0.7 7.7 p0.7 5.2 p0.7 7.8 p0.7 5.3 p0.7 6.35 p1.3 6.35 p1.3 6.35 p1.3 12.7 p1.3 12.7 p1.3 19.05 p1.3 19.05 p1.3 Feed hole centre to bottom H edge of the component 16.5 p0.3 18.5 p0.5 16.5 p0.3 18.5 p0.5 16.5 p0.5 18.5 p0.5 16.5 p0.5 18.5 p0.5 16.5 p0.5 18.5 p0.5 16.5 p0.5 18.5 p0.5 16.5 p0.5 18.5 p0.5 Feed hole centre to top H edge of the component1 H+Hcomponent < H1 32.25 max. H+Hcomponent < H1 32.25 max. H+Hcomponent < H1 24.5 to 31.5 H+Hcomponent < H1 25.0 to 31.5 H+Hcomponent < H1 26.0 to 37.0 H+Hcomponent < H1 30.0 to 43.0 H+Hcomponent < H1 35.0 to 45.0 Pin spacing at +0.8 F 2.5 p0.5 5.0 upper edge of carrier tape -0.2 7.5 p0.8 10.0 p0.8 15 p0.8 22.5 p0.8 27.5 p0.8 Pin diameter d 0.4 p0.05 Component alignment Dh p 2.0 max. p 2.0 max. p 3.0 max. p 3.0 max. p 3.0 max. p 3.0 max. p 3.0 max. 0.6 p0.2 0.6 p0.2 0.6 p0.2 0.6 p0.2 0.6 p0.2 0.6 p0.2 0.6 p0.2 Total tape thickness t Package (see also page 150) REEL 0.5 p0.05 0.5 +0.06 p0.05 or 0.6 -0.05 0.5 +0,06 p0.05 or 0.6 -0.05 ROLL/AMMO P 360 max. 52 p2 B p2 P 30 p158 depending on comp. dimensions Unit 0.8 +0,08 -0.05 0.8 +0,08 -0.05 +0.08 0.8 -0.05 AMMO 52 p254 p2 max. P 500 max. B 58 p2 or REEL B 60 p2 REEL PP 360 30 p1 P 25 p1 66 p2 68 p2 depending on PCM and component dimensions see details page 151. Dims in mm. 01.19 Diameter of pins see General Data. Please clarify customer-specific deviations with the manufacturer. * PCM 10 and PCM 15 can be crimped to PCM 7.5. Position of components according to PCM 7.5 (sketch 1). P 0 = 12.7 or 15.0 is possible 149 D Types of Tape Packaging of Capacitors for Automatic Radial Insertion REEL Packaging 340 max. 301 251 360 max. 500 max. AMMO Packaging 340 max. 370 max. ROLL Packaging 34 0m ax. 50 max. 50 max. 70 max. . ax 0 m ax. 34 0 m 49 B BAR CODE (Labelling) Labelling of package units in plain text and with alphanumerical Bar Code BARCODE Code 39" Scanner decoding of WIMA supplier number Customer`s P/O number Customer`s part number WIMA confirmation number WIMA part number Lot number Date code Quantity In addition part description of - - - - - - article capacitance value rated voltage dimensions capacitance tolerance packing 01.19 as well as gross weight and customer`s name are indicated in plain text. 150 D Packing Quantities for Capacitors with Radial Pins in PCM 2.5 mm to 22.5 mm Size PCM 2.5 mm 5 mm 7.5 mm 10 mm 15 mm 22.5 mm W 2.5 3 3.8 4.6 5.5 2.5 3 3.5 4.5 4.5 5 5.5 5.5 6.5 7.2 7.2 8.5 8.5 11 2.5 3 4 4.5 5 5.7 7.2 3 4 4 4 5 5 6 6 8 5 5 6 6 7 7 8 8 9 9 10 11 5 6 7 8 8.5 10 10.5 10.5 11 12 H 7 7.5 8.5 9 10 6.5 7.5 8.5 6 9.5 10 7 11.5 8 8.5 13 10 14 16 7 8.5 9 9.5 10.5 12.5 12.5 9 8.5 9 9.5 10 11 12 12.5 12 11 13 12.5 14 14 15 15 17 14 16 18 14 14 15 16.5 20 18.5 22 19 20.5 21 24 bulk L 4.6 4.6 4.6 4.6 4.6 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 10 10 10 10.3 10.3 10.3 10.3 13 13.5 13 13 13.5 13 13 13 13 18 19 18 19 18 19 18 19 18 18 19 18 26.5 26.5 26.5 28 26.5 28 26.5 26.5 26.5 28 Codes 0B 0C 0D 0E 0F 1A 1B 1C 1D 1E 1F 1G 1H 1I 1J 1K 1L 1M 1N 2A 2B 2C 2D 2E 2F 2G 3A FA 3C 3D FB 3F 3G 3H 3I 4B FC 4C FD 4D FE 4F FF 4H 4J FG 4M 5A 5B 5D FH 5F FI 5G 5H 5I FJ S 5000 5000 5000 5000 5000 5000 5000 5000 6000 4000 3500 4000 2500 2500 2500 2000 2000 1500 1000 5000 5000 4000 3500 3000 2000 1500 3000 3000 3000 3000 2000 3000 2400 2400 2000 2400 1000 2000 1000 1600 1000 1200 500 1200 900 500 1000 1200 1000 760 500 500 570* 594* 594* 561* 480* Moulded versions. Rights reserved to amend design data without prior notification. 01.19 * TPS (Tray-Packing-System). Plate versions may have different packing units. Samples and pre-production needs on request. pcs. per packing unit REEL AMMO P 360 P 500 340 x 340 490 x 370 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 N O F I H J A C B D 2200 2500 - 2800 - 2000 2300 - 2300 - 1500 1800 - 1800 - 1200 1500 - 1500 - 900 1200 - 1200 - 2200 2500 - 2800 - 2000 2300 - 2300 - 1600 2000 - 2000 - 1300 1500 - 1500 - 1300 1500 - 1500 - 1100 1400 - 1400 - 1000 1200 - 1200 - 1000 1200 - 1200 - 800 1000 - 1000 - 700 1000 - 1000 - 700 950 - 1000 - 600 800 - 800 - 600 800 - 800 - 500 600 - 640 - - 2500 4400 2500 - - 2200 4300 2300 4150 - 1700 3200 1700 3100 - 1500 2900 1400 2700 - 1300 2500 1300 - - 1000 2200 1100 - - 900 1800 1000 - - 1100 2200 - 1900 - 900 1600 - 1450 - 900 1600 - 1450 - 900 1600 - 1400 - 700 1300 - 1200 - 700 1300 - 1200 - 550 1100 - 1000 - 550 1100 - 1000 - 400 800 - 740 - 600 1200 - 1150 - 600 1200 - 1200 - 500 1000 - 1000 - 500 1000 - 1000 - 450 900 - 850 - 450 900 - 850 - 400 800 - 740 - 400 800 - 740 - 350 700 - 650 - 350 700 - 650 - 300 650 - 590 - 300 600 - 540 - - 800 - 770 - - 700 - 640 - - 600 - 550 - - 500 - 480 - - 480 - 450 - - 420 - 380 - - 400 - 360 - - 400 - 360 - - 380 - 350 - - 350 - 310 ROLL 151 D Packing Quantities for Capacitors with Radial Pins in PCM 27.5 mm to 52.5 mm Size PCM pcs. per packing unit REEL AMMO P 360 P 500 340 x 340 490 x 370 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 H16.5 H18.5 N O F I H J A C B D - - 460/340* - 420 - - 380/280* - 350 - - 300 - 290 - - - - - 270 - 250 - - - - - - - - - - - - - - - - - - - - - - - - - - - ROLL bulk W 9 11 13 13 15 15 17 17 20 20 H 19 21 24 25 26 26 29 34.5 32 39.5 L 31.5 31.5 31.5 33 31.5 33 31.5 31.5 33 31.5 Codes 6A 6B 6D FK 6F FL 6G 6I FM 6J S 567* 459* 378* 405* 324* 324* 198* 198* 162* 162* 37.5 mm 9 11 13 15 17 19 20 24 31 35 40 19 22 24 26 29 32 39.5 45.5 46 50 55 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 41.5 7A 7B 7C 7D 7E 7F 7G 7H 7I 7J 7K 441* 357* 294* 252* 154* 140* 126* 112* 84* 35* 28* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 48.5 mm 19 23 27 33 37 31 34 37.5 48 54 56 56 56 56 56 8D 8E 8H 8J 8L 120* 80* 84* 25* 25* - - - - - - - - - - - - - - - - - - - - - - - - - 45 45 50 55 65 57 57 57 57 57 9D 9E 9F 9H 9J 70* 60* 25* 20* 20* - - - - - 52.5 mm 25 30 35 45 45 - - - - - - - - - - 27.5 mm * for 2-inch transport pitches. * TPS (Tray-Packing-System). Plate versions may have different packing units. Samples and pre-production needs on request. Moulded versions. Rights reserved to amend design data without prior notification. 01.19 Updated data on www.wima.com 152 D WIMA Part Number System A WIMA part number consists of 18 digits and is composed as follows: Field 1 - 4: Type description Field 5 - 6: Rated voltage Field 7 - 10: Capacitance Field 11 - 12: Size and PCM Field 13 - 14: Version code (e.g. Snubber versions) Field 15: Capacitance tolerance Field 16: Packing Field 17 - 18: Pin length (untaped) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 M K S 2 C 0 2 1 0 0 1 A 0 0 M S S D 20 % bulk MKS 2 01.19 Type description: SMD-PET = SMDT SMD-PEN = SMDN SMD-PPS = SMDI FKP 02 = FKP0 MKS 02 = MKS0 FKS 2 = FKS2 FKP 2 = FKP2 FKS 3 = FKS3 FKP 3 = FKP 3 MKS 2 = MKS2 MKP 2 = MKP2 MKS 4 = MKS4 MKP 4C = MKPC MKP 4 = MKP4 MKP 10 = MKP1 FKP 1 = FKP1 MKP-X2 = MKX2 MKP-X1 R = MKX1 MKP-Y2 = MKY2 MP 3-X2 = MPX2 MP 3-X1 = MPX1 MP 3-Y2 = MPY2 MP 3R-Y2 = MPRY MKP 4F = MKPF Snubber MKP = SNMP Snubber FKP = SNFP GTO MKP = GTOM DC-LINK MKP 3 = DCP3 DC-LINK MKP 4 = DCP4 DC-LINK MKP 4S = DCPS DC-LINK MKP 5 = DCP5 DC-LINK MKP 6 = DCP6 DC-LINK HC = DCHC DC-LINK HY = DCHY 63 VDC Rated voltage: 50 VDC = B0 63 VDC = C0 100 VDC = D0 250 VDC = F0 400 VDC = G0 450 VDC = H0 520 VDC = H2 600 VDC = I0 630 VDC = J0 700 VDC = K0 800 VDC = L0 850 VDC = M0 900 VDC = N0 1000 VDC = O1 1100 VDC = P0 1200 VDC = Q0 1250 VDC = R0 1500 VDC = S0 1600 VDC = T0 2000 VDC = U0 2500 VDC = V0 3000 VDC = W0 4000 VDC = X0 6000 VDC = Y0 250 VAC = 0W 275 VAC = 1W 300 VAC = 2W 305 VAC = AW 350 VAC = BW 440 VAC = 4W 500 VAC = 5W ... 0.01 mF Capacitance: 22 pF = 0022 47 pF = 0047 100 pF = 0100 150 pF = 0150 220 pF = 0220 330 pF = 0330 470 pF = 0470 680 pF = 0680 1000 pF = 1100 1500 pF = 1150 2200 pF = 1220 3300 pF = 1330 4700 pF = 1470 6800 pF = 1680 0.01 mF = 2100 0.022 mF = 2220 0.047 mF = 2470 0.1 mF = 3100 0.22 mF = 3220 0.47 mF = 3470 = 4100 1 mF 2.2 mF = 4220 4.7 mF = 4470 = 5100 10 mF = 5220 22 mF = 5470 47 mF 100 mF = 6100 220 mF = 6220 1000 mF = 7100 1500 mF = 7150 ... 2.5 x 6.5 x 7.2 - Size: 4.8 x 3.3 x 3 Size 1812 = KA 4.8 x 3.3 x 4 Size 1812 = KB 5.7 x 5.1 x 3.5 Size 2220 = QA 5.7 x 5.1 x 4.5 Size 2220 = QB 7.2 x 6.1 x 3 Size 2824 = TA 7.2 x 6.1 x 5 Size 2824 = TB 10.2 x 7.6 x 5 Size 4030 = VA 12.7 x 10.2 x 6 Size 5040 = XA 15.3 x 13.7 x 7 Size 6054 = YA 2.5 x 7 x 4.6 PCM 2.5 = 0B 3 x 7.5 x 4.6 PCM 2.5 = 0C 2.5 x 6.5 x 7.2 PCM 5 = 1A 3 x 7.5 x 7.2 PCM 5 = 1B 2.5 x 7 x 10 PCM 7.5 = 2A 3 x 8.5 x 10 PCM 7.5 = 2B 3 x 9 x 13 PCM 10 = 3A 4 x 9 x 13 PCM 10 = 3C 5 x 11 x 18 PCM 15 = 4B 6 x 12.5 x 18 PCM 15 = 4C 5 x 14 x 26.5 PCM 22.5 = 5A 6 x 15 x 26.5 PCM 22.5 = 5B 9 x 19 x 31.5 PCM 27.5 = 6A 11 x21 x 31.5 PCM 27.5 = 6B 9 x 19 x 41.5 PCM 37.5 = 7A 11 x 22 x 41.5 PCM 37.5 = 7B 19 x 31 x 56 PCM 48.5 = 8D 25 x 45 x 57 PCM 52.5 = 9D ... Version code: Standard = Version A1 = Version A1.1.1 = Version A2 = ... 00 1A 1B 2A Tolerance: 20 % = 10 % = 5 % = 2.5 % = 1 % = ... 6 -2 M K J H E Packing: AMMO H16.5 340 x 340 AMMO H16.5 490 x 370 AMMO H18.5 340 x 340 AMMO H18.5 490 x 370 REEL H16.5 360 REEL H16.5 500 REEL H18.5 360 REEL H18.5 500 ROLL H16.5 ROLL H18.5 BLISTER W12 180 BLISTER W12 330 BLISTER W16 330 BLISTER W24 330 Bulk/TPS Standard ... =A =B =C =D =F =H =I =J =N =O =P =Q =R =T =S Pin length (untaped) 3.5 0.5 = C9 6 -2 = SD 16 1 = P1 ... Pin length (taped) none = 00 The data on this page is not complete and serves only to explain the part number system. Part number information is listed on the pages of the respective WIMA range. 147