programming of high-

capacity memory devices

devices supported with

new devices added

supporting concurrent

compatible with the

latest operating

systems including

Windows 8

parts and labour

The Dataman 448Pro2 is a super fast PC based gang programmer with

optimal device for your design. Independent programming options

combine with device insertion tests and a user friendly interface to give

higher programming yields and reduced failure rates.

General

• The 448Pro2 programmer offers the same advanced features as the 448Pro+ programmer but with up to

70% faster programming of high-capacity memory devices.

• FPGA based totally reconfigurable 48 powerful TTL pindrivers provide H/L/pull_up/pull_down and read

capability for each pin of the socket. Advanced pindrivers incorporate high-quality high-speed circuitry to

deliver signals without overshoot or ground bounce for all supported devices. Pin drivers operate down to

to environment or operator failure. All ZIF socket pin inputs of the Dataman 448Pro2 programmer are

protected against ESD up to 15kV.

• The 448Pro2 programmer performs programming verification at the marginal levels of supply voltage,

improving programming yield and guaranteeing long data retention.

• Wide range of socket converters are available to handle devices in PLCC, SOIC, PSOP, SSOP, TSOP, TSSOP,

TQFP, QFN (MLF), SDIP, BGA and other packages.

Dataman 448Pro2 www.dataman.com

Programmer Specification

• 4 x universal programming modules (4 x 48-pin DIL ZIF sockets and 4 x ISP

Base Unit (DAC)

• Three D/A converters for VCCP, VPP1, and VPP2, controllable rise and fall time

• VCCP range 0..8V/1A

• VPP1, VPP2 range 0..26V/1A

ZIF Socket

• 48-pin DIL ZIF socket accepts both 300/600 mil devices up to 48-pin

• Pindrivers: 48 universal

• VCCP/VPP1/VPP2 can be connected to each pin

ISP Connector

• 20-pin male type with missinsertion lock

• 6 TTL pindrivers, provides H, L, CLK, pull-up, pull-down; level H selectable

from 1.8V up to 5V to handle all (including low-voltage) devices

• 1x VCCP voltage (range 2V..7V/100mA), can be applied to two pins

• Programmed chip voltage (VCCP) with both source/sink capability and

voltage sense

• 1x VPP voltage (range 2V..25V/50mA), can be applied to six pins

• Target system supply voltage (range 2V..6V/250mA)

• ESD protection on each pin (IEC1000-4-2: 15kV air, 8kV contact)

• This part of the software is focused to the easy monitoring of high-volume

production operations.

• Operator-friendly control software combines many powerful functions with

ease of use. Graphic user interface provides an overview of important

information, reducing the burden on the operator with unnecessary details.

• Project files are used to control the 448Pro2 and contain user data, chip

programming setup, chip configuration, auto programming command

sequence. This helps minimize operator error as the project file is normally

created by an engineer and then passed to the operator. The optional

protected mode can be set avoiding unwanted changes to the project file.

pull-down menus, hot keys and on-line help. Selecting a device is performed

by its class, by manufacturer or simply by typing a fragment of the vendor

name and/or part number.

• Standard device-related commands (read, blank check, program, verify, erase)

are enhanced by test functions (insertion test, signature-byte check) and

additional special functions (auto-increment serialisation, production mode -

programming starts immediately after chip is inserted).

• All known data formats are supported. Automatic file format detection and

conversion performed during loading of file.

• The software provides extensive information about programmable devices

EPROM, EEPROM, Flash EPROM, NAND Flash, LBA-NAND, mDOC H3, multi-chip

devices, FRAM, MRAM, NV RAM, PROM, Serial E(E)PROM, Serial Flash,

Configuration (EE)PROM, 1-Wire E(E)PROM, PLD, FPGA, Clocks, Microcontrollers

Programmer (ISP Connector)

Serial E(E)PROM, 1-Wire E(E)PROM, Serial Flash, Microcontrollers, PLD, FPGA

• ESD wrist strap with cord and banana plug

• Vacuum pen

• Optional range of adapters and socket converters also available

• 30 day money back guarantee* - If you don't like it, send it back.

• Three year guarantee - Three years parts and labour warranty, on the

448Pro2 universal gang programmer.