Fiber Optic Products Catalog LC Connectors One-Piece LC Connector Product Facts Singlemode Telecordia GR-326 tested (Report #501-652) Multimode TIA/EIA 568-B.3 tested Singlemode and Multimode are compatible with both anaerobic adhesives and heat cure epoxy adhesives Universal Connector Body Common body for simplex or duplex Common body for jumper or buffer applications Fewer parts to inventory Universal One-Piece Connector Body Widened Thumb Latch Duplex Clip Field installable Makes simplex assemblies duplex Correct polarity errors Used for both jumpers and buffered fiber applications One-Piece Body Improved rigidity Improved side-load strength Diamond Knurled Crimp Body Duplex Clip Color coded to comply with 568 C Aqua for 50/125 laser optimized Black for standard 50/125 Beige for 62.5/125 Blue for singlemode Widened Thumb Latch Increased hit area Increased bend strength Ramped front latch for snag resistance Diamond Knurled Crimp Body Increased tensile proof strength Identical to Tyco Electronics' SC/FC design Performance Characteristics Insertion Loss -- 0.2 dB Typical Reflectance -- -55 dB Typical Operating Temperature -- -40C to +75C Durability -- 500 Cycles LC Connector Kits Description Fiber Type Housing Color Boot Color Singlemode Blue Blue Beige Aqua Beige Black Beige Beige Blue Blue Beige Aqua Beige Black Beige Beige Black -- Simplex Multimode Singlemode ) wn ho s .0 6-2 (1. Duplex Multimode Duplex Clip For use with Simplex Kits 900 m Buffered 1.6-2.0 mm Jacketed 3.0 mm Jacketed 900 m Buffered 1.6-2.0 mm Jacketed 3.0 mm Jacketed 900 m Buffered 1.6-2.0 mm Jacketed 3.0 mm Jacketed 900 m Buffered 1.6-2.0 mm Jacketed 3.0 mm Jacketed 900 m Buffered 1.6-2.0 mm Jacketed 3.0 mm Jacketed 900 m Buffered 1.6-2.0 mm Jacketed 3.0 mm Jacketed 900 m Buffered 1.6-2.0 mm Jacketed 3.0 mm Jacketed 900 m Buffered 1.6-2.0 mm Jacketed 3.0 mm Jacketed Individual Pack Part Number 1918384-1 1918266-1 1918374-1 1918385-3 1918267-3 1918375-3 1918385-4 1918267-4 1918375-4 1918385-1 1918267-1 1918375-1 1918387-1 1918372-1 1918376-1 1918388-3 1918373-3 1918377-3 1918388-4 1918373-4 1918377-4 1918388-1 1918373-1 1918377-1 Bulk Pack Part Number 1918384-2 1918266-2 1918374-2 1918385-5 1918267-5 1918375-5 1918385-6 1918267-6 1918375-6 1918385-2 1918267-2 1918375-2 1918387-2 1918372-2 1918376-2 1918388-5 1918373-5 1918377-5 1918388-6 1918373-6 1918377-6 1918388-2 1918373-2 1918377-2 -- 1754371-1 -- Used with Note: All part numbers are RoHS compliant. 44 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog LC Connectors (Continued) Connectors/Adapters/ Tooling & Accessories One-Piece LC Connector Family 3.0 Jacket 1 1.6 - 2.4 mm Jacket 250 / 900 m Buffered Fiber Note: All of the above are also available in simplex. LC Connector Component Selection Chart (bulk packaged) Fiber Type Simplex Connector Assembly & Dust Cap Duplex Clip Singlemode (blue hsg.) 1828456-1 1754371-1 Multimode (beige hsg.) 1754625-1 1754371-1 Cable Size Crimp Eyelet with Heat Shrink Crimp Eyelet Strain Relief Description 1.6-2.0 mm 1.6-2.0 mm 1.6-2.0 mm 2.4 mm 2.4 mm 2.4 mm 3.0 mm 900 m 1.6-2.0 mm 1.6-2.0 mm 1.6-2.0 mm 2.4 mm 2.4 mm 2.4 mm 3.0 mm 900 m 6374150-1 6374150-1 6374150-1 6588189-1 6588189-1 6588189-1 -- -- 6374150-1 6374150-1 6374150-1 6588189-1 6588189-1 6588189-1 -- -- -- -- -- -- -- -- 5504118-3 -- -- -- -- -- -- -- 5504118-3 -- Straight/Bend Limiting Angled 50 Degree Angle Straight/Bend Limiting Angled 50 Degree Angle Straight 900 m Buffer, 10 mm Straight/Bend Limiting Angled 50 Degree Angle Straight/Bend Limiting Angled 50 Degree Angle Straight 900 m Buffer, 10 mm Crimp Tool Dieset only - 1588175-1 Crimp Tool with Dieset - 1588176-1 Instruction Sheet: 408-8675 Strain Relief Part Number (see chart below) 1588153-X 1374737-X 6457543-X 1588153-X 1374737-X 6457543-X 502716-X 6588612-X 1588153-X 1374737-X 6457543-X 1588153-X 1374737-X 6457543-X 502716-X 6588612-X Termination Kit - 1754462-1 Upgrade Kit for Anaerobic terminations - 1754603-1 http://www.tycoelectronics.com/documents 1374737-X 6588612-X 6457543-X Strain Relief Color Base Part Number 1588153 1374737 6457543 502716 6588612 Beige Blue Black Red Aqua -5 -2 -1 -3 -1 -2 -1 -2 -4 -2 -3 -3 -4 -1 -5 -- -- -- -5 -4 -8 -- -- -11 -8 1588153-X Note: All part numbers are RoHS compliant. 45 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog LC Connectors (Continued) Tight Jacketed LC Connectors Product Facts Multimode or singlemode Simplex or duplex Tested using MIL-PRF85045/16 2.0 mm cable LC Commercial Item Description (CID) interim approval by the Naval Surface Warfare Center, Dahlgren Division Application In Flight Networks Shipboard Applications Aero Market The tight jacketed LC Connectors are non pullproof versions of the standard connectors that are designed for use with tight construction cable. Unlike standard connectors, this design allows the jacket and buffer to move together, reducing the chances of micro-bends and fiber breakage. Boot, Bend Limiting 52.0 Ref. [2.05] Crimp Eyelet / Heat Shrink Assembly Connector Sub Assembly Fiber Type Singlemode (blue body & straight boot) Multimode (beige body & straight boot) Kit Part Number 6828095-X 6828130-X 1918228-X 6828094-X 6828129-X 1918153-X Description Simplex, 1.6-2.0 mm Duplex, 1.6-2.0 mm Simplex, 2.4 mm Simplex, 1.6-2.0 mm Duplex, 1.6-2.0 mm Simplex, 2.4 mm Note: X = -1 for individual package, -2 for bulk package. Instruction Sheet 408-10014. See http://www.tycoelectronics.com/documents. Duplex Clip Available (Part Number 1754371-1). Note: All part numbers are RoHS compliant. 46 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog LC Connectors (Continued) Connectors/Adapters/ Tooling & Accessories Short Boot LC Connector Product Facts Overall LC connector length 42.5 mm (compares to 52 mm standard product) Multimode or singlemode Simplex or duplex Anti-snag rear connector latch For 1.6 mm to 2.4 mm cable GR-326 Small Form-Factor Performance Requirements 1 The short boot LC connector provides GR-326 level performance while reducing ferrule tip to boot length to 42.5 mm. The 20% reduction in length is ideal for installing in cabinets or other enclosed spaces, protecting against potential mechanical damage from closed cabinet doors. Bend Limiting Boot Crimp Eyelet / Heat Shrink Assembly Connector Subassembly Protective Cover Fiber Type Singlemode (blue body & straight blue boot) Multimode (beige body & straight beige boot) Kit Part Number 1918407-X 1918406-X 1918405-X 1918404-X Description Simplex, 1.6-2.0 mm Duplex, 1.6-2.0 mm Simplex, 1.6-2.0 mm Duplex, 1.6-2.0 mm Note: X = -1 for individual package, -2 for bulk package The boot (1918403-X) is also sold separately, for use with any Tyco Electronics LC connector. 31.95 Ref. [1.258] 47.00 Ref. [1.850] 27.45 Ref. [1.081] 42.50 Ref. [1.673] Part Number 1457567-4 Adapter Ref. Not Included in Kit Note: All part numbers are RoHS compliant. 47 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog LC Connectors (Continued) Wide Latch Multimode KRONE Universal Adapter Narrow Latch Multimode Narrow Latch Singlemode (Not sold through Tyco Electronics) Wide Latch Singlemode Narrow Latch LC Connector Product Facts One-piece housing Reduced thumb latch for tight interconnections Mates with Krone universal 1.25 mm adapter Multimode or singlemode Duplex through use of clip (Part Number 1754371-1) Anti-snag rear connector latch Subassembly can be used with 900 m to 3.0 mm cable GR-326 Small Form Factor Performance The reduced thumb latch on this connector provides superior performance when space is limited by maintaining all of the other features of the Tyco Electronics LC connector. Bend Limiting Boot Crimp Eyelet / Heat Shrink Assembly Connector Assembly Protective Cover Fiber Type Singlemode (Blue Body & Straight Blue Boot) Multimode (Beige Body & Straight Beige Boot) Kit Part Number Description 1918538-X Simplex, 1.6-2.0 mm 1918539-X Simplex, 1.6-2.0 mm Note: X = -1 for individual package, -2 for bulk package 52.00 Ref. [2.047] KRONE is a trademark of KRONE Optical Systems, Inc. Note: All part numbers are RoHS compliant. 48 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog LC Connectors (Continued) Connectors/Adapters/ Tooling & Accessories LC/SC Flexible Boot Product Facts Compatible with any Tyco Electronics LC Connector Compatible with Tyco Electronics SC Part Numbers 6588714-3 and 6588715-5 Controls cable radius in limited space environments For use with 1.6 to 2.4 mm multimode or singlemode cable Requires crimp eyelet with heat shrink (Part Number 6374150-X or 6588189-1) 1 Base Part Number 1918003 Beige -5 Blue -2 Black -3 Red -- Base Part Number 1828184 Beige -4 Blue -1 Black -2 Green -3 LC/SC 900 m GR-326 Style Boot Product Facts Compatible with any Tyco Electronics LC Connector Compatible with Tyco Electronics SC parts 6588714-3 and 6588715-5 Provides bend limiting support For use with 900 m multimode or singlemode fiber Note: All part numbers are RoHS compliant. 49 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog LC Adapters LC Duplex Adapter for SC Cutout -- Plastic Alignment Sleeve Material Housing Color Beige Black Aqua Blue Beige Black Aqua Beige Black Aqua Blue Green Beige Black Aqua Blue Green Description Flanged Metal Flangeless Flanged Ceramic Flangeless Part Numbers M2 x 0.4 or 2-56 UNC When Required 6457567-8 2-6457567-1 2-6457567-0 1-6457567-3 6457567-7 1-6457567-9 1-6457567-8 6457567-5 1-6457567-7 1-6457567-6 6457567-4 6457567-6 6457567-2 1-6457567-5 1-6457567-4 6457567-1 6457567-3 13.0-13.5 [.512-.531] 18.0 [.709] 9.5-10.0 [.375-.393] Recommended Panel Cutout Max. Panel Thk. 1.70 [.067] 13.2-13.4 [.520-.527] LC Duplex Adapter for LC Cutout -- Plastic Alignment Sleeve Material Description Duplex Sr-Jr Metal Duplex Sr-Sr Duplex Sr-Jr Ceramic Duplex Sr-Sr Housing Color Beige Blue Beige Blue Beige Blue Beige Blue Part Numbers Part Numbers 13.2-13.4 [.520-.527] 1985150-4 1985150-3 1985149-4 1985149-3 1985150-2 1985150-1 1985149-2 1985149-1 Recommended Panel Cutout Panel Thk. 1.2/1.7 [.047/.067] O 2.5 [.098] LC Adapter for SC Cutout -- Metal Alignment Sleeve Material Description Housing Color Ceramic Flanged Flangeless Flangeless w/ EMI Shielding Electroless Nickel 9.5-10.0 [.375-.393] 18.0 [.709] 13.0-13.5 [.512-.531] 1754683-1 1754682-1 M2 x 0.4 or 2-56 UNC When Required 1754727-1 Recommended Panel Cutout Panel Thk. 1.2/1.7 [.047/.067] 7.1-7.2 [.280-.283] LC Simplex Adapter -- Plastic Alignment Sleeve Material Description Ceramic Simplex Adapter Housing Color Beige Blue Part Numbers 11.7-11.8 [.461-.465] 1457062-2 1457062-1 Recommended Panel Cutout Panel Thk. 1.2/1.7 [.047/.067] LC Quad Adapter -- Plastic Flanged Alignment Sleeve Material Metal Ceramic Description Flanged Flanged Housing Color Beige Blue Part Numbers 1695790-5 1695790-4 Note: All part numbers are RoHS compliant. Recommended Panel Cutout Max. Panel Thk. 1.7 [.067] 50 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog MU High Density Connectors Connectors/Adapters/ Tooling & Accessories Product Facts Singlemode and multimode product range For digital network applications PC end face available on both singlemode and multimode connectors For analog network applications, APC end face available on singlemode connectors (8) Connector design uses 1.25 mm ceramic ferrule technology Polarized for precise insertion Factory terminated cable assemblies LSZH sheathed cable available High optical performance (low insertion, high return loss) High density (up to 8 lines per module) Performance Characteristics Insertion Loss -- 0.1 dB Typical Reflectance -- -55 dB Typical Operating Temperature -- -25C to +75C Durability -- 500 Cycles 1 Tyco Electronics' MU high density fiber optic interconnection system offers a solution for high performance telecommunications networking. The system centers around the fully standardized MU connector, which is also sometimes known as the Mini SC. The MU connector is at least half the size of the standard SC connector. It can offer twice the port density but all the optical performance of traditional fiber optic connectors. Featuring a similar latching mechanism to the SC connector, the MU is just as easy to connect and disconnect. The MU system includes a complete range of multimode and singlemode pre-terminated cable assemblies; bulkhead adapters; backplane housings; system card housings; connector kits; termination tooling and customer polishing processes. Key Applications Front Panel I/O and High Density Patch Panels for Optical Transmission Equipment, Optical Distribution Frames and Optical Network Units. Full range of simplex, duplex and 8 position bulkhead adapters Color coded adapters for ease of identification Tuneable versions available to achieve lower insertion losses "Push-pull" type latching mechanism Fully compliant with relevant IEC standards (IEC 60874-1, CECC 86 305 801) Exceeds ETSI performance requirements (ETSI Grade P) Back Panel I/O in Optical Transmission and Switching Equipment 8 position Type L optical modules available 2.0 mm misalignment pickup tolerance during mating Zero force on backplane when fully mated Description FOKIT MU SM PC 0.9 125/1.0 FOKIT MU SM PC 0.9 126/1.0 FOKIT MU SM PC 125 m, 2.0 mm FOKIT MU SM PC 126 m, 2.0 mm Part Number 1348982-1 1348982-2 106875-1 106875-2 Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. Zero tensile load on daughter card when fully mated Constant mating force during 2.5 mm free float Fully compliant with IEC 60917 and IEC 61076-4-101 MU Standards Compliance Product range -- MU cable assembly Applicable standards -- IEC 60874-1 CECC 86 305 801 (MU-APC) I-ETS 300 671 IEC 61300 Product range -- Z-PACK 2 mm HM Product Applicable standards -- IEC 60917 IEC 61076-4-101 51 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog MU High Density Connectors (Continued) MU Bulkhead Adapter The MU bulkhead adapter is designed to help save valuable panel space in high density applications. The adapter enables the interconnection of two MU connectors and features a 1.25 mm ceramic alignment sleeve to ensure precise fiber alignment and low insertion loss, both during and after the interconnection process. log network applications. It is also available in a choice of simplex, duplex and 8 position versions. Description Part Number PC finish Simplex MU Adapter 233263-1 Duplex MU Adapter 233263-3 Duplex MU Adapter with SC cut-out 1348840-2 APC finish Duplex MU Adapter with SC cut-out 1348840-1 The MU bulkhead adapter is available in PC and APC versions for both digital and ana- Z-PACK 2 mm HM1 Type L and M Connector Housings Z-PACK 2 mm HM connector housings offer a solution to the demand for discrete fiber lines, allowing single disconnects and routing on the backplane. The 8 position Type L connector housing is fully optical and can accommodate up to 8 fiber lines. These connector housings are available in female configurations and are designed for use on the system card. The hybrid Type M connector housing combines optical and electrical contacts in one housing, with 55 signal contact positions and 4 fiber optic lines. It allows easy migration from combined optical / electrical to full optical backplane inter-connections. Female Type M connector housings are suitable for use on the system card while male Type M connector housings are designed for back panel application. Tyco Electronics also designs and manufactures a range of MT based fiber optic backplane connectors, LIGHTRAY MPX fiber optic backplane connectors. For further information, see Cable Assemblies & Backplane Interconnects Section 2, pages 137-151. Description Type L Male Female Part Number 106743-1 106744-1 HM : Hard Metric 1 MU Backplanes Product Facts Complies to IEC 60917 and IEC 61076-4-101 Constant mating force during 2.5 mm free float Zero tensile load on system card and backplane when fully mated Low insertion / extraction forces Scalable system allows easy implementation of future upgrades Low loss High return loss APC versions available Float in all directions (including x and y) Misalignment pick up tolerances 2.0 horizontal, 2.5 mm vertical, and 2 degrees angular Description 2 Position Backplane Housing (includes mounting bracket) Systemcard Housing 4 Position Backplane Housing (includes mounting bracket) Systemcard Housing Part Number 1391160-1 1391095-1 1391161-1 1391094-1 Note: Future product extensions planned: 6 position and 8 position versions. Please contact your local Sales Engineer for additional information. Note: Part Numbers are RoHS compliant except: Indicates non-RoHS compliant. 52 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog SC Connectors Connectors/Adapters/ Tooling & Accessories Product Facts One-piece connector body: Fastest assembly Field installable Anaerobic adhesive compatible Compliant with JIS C-5973 Fibre Channel TIA FOCIS-3 Pre-radiused ceramic ferrules Simplex Connector Description For 125 m cladding diameter Instruction Sheet 408-8674 http://www.tycoelectronics. com/documents Color coded to comply with 568C Aqua for 50/125 laser optimized Black for standard 50/125 Beige for 62.5/125 Blue for singlemode Performance Characteristics for Singlemode SC Connector Kits -- Polymer Crimp Body Insertion Loss -- <0.2 dB Typical Return Loss -- <-55 dB Typical Durability -- 200 Cycles Housing Color Boot Color Simplex Blue Blue Duplex Blue Blue 900 m Buffered, 3.0 mm Jacketed 3.0 mm Jacketed 2.4 mm Jacketed 2.0 mm Jacketed 900 m Buffer 3.0 mm Jacketed 2.0 mm Jacketed Individual Pack Part Numbers Bulk Pack Crimp Tool 5504646-7 -- 503911-1 5504646-1 5504933-2 5503934-2 5492123-1 5504655-1 5504936-2 5504646-2 5504933-4 5503934-3 5492123-2 5504655-2 -- 503911-1 492026-1 492026-1 N/A 503911-1 492026-1 Part Numbers Bulk Pack Description Housing Color Boot Color Used With 3.0 mm Jacketed 4-1918861-5 -- Simplex Blue Blue Duplex Blue Blue 2.4 mm Jacketed 2.0 mm Jacketed 2.4 mm Jacketed 2.0 mm Jacketed 6588714-5 6588714-1 6693776-5 6693776-1 6588714-6 6588714-4 6693776-6 6693776-2 Crimp Tool (1) 492131-1 (1) 58532-1 1588176-1 1588176-1 1588176-1 1588176-1 Part Numbers Bulk Pack Crimp Tool Individual Pack Multimode SC Connector Kits Housing Color Boot Color Performance Characteristics for GR-326 Style Product Insertion Loss -- <0.2 dB Typical Return Loss -- <-59 dB Typical Durability -- 200 Cycles Tested to GR-326 (Test Report 501-584) Used With GR-326 Style Singlemode SC Connector Kits -- Metal Crimp Body Description 1 Singlemode SC Connector Kits -- Polymer Crimp Body SC 1.6 mm to 2.0 mm Connector Duplex Connector Simplex Beige Aqua Beige Black Tunable -- 6 positions Performance Characteristics for Multimode SC Connector Kits Insertion Loss -- <0.2 dB Typical Durability -- 500 Cycles TIA 586B Compliant Beige Beige Beige Aqua Beige Black Beige Beige Duplex Note: All part numbers are RoHS compliant. Used With 900 m Buffered, 3.0 mm Jacketed 3.0 mm Jacketed 2.0 mm Jacketed 900 m Buffer 900 m Buffered, 3.0 mm Jacketed 3.0 mm Jacketed 2.0 mm Jacketed 900 m Buffer 900 m Buffered, 3.0 mm Jacketed 3.0 mm Jacketed 2.4 mm Jacketed 2.0 mm Jacketed 900 m Buffer 3.0 mm Jacketed 2.0 mm Jacketed 3.0 mm Jacketed 2.0 mm Jacketed 3.0 mm Jacketed 2.4 mm Jacketed 2.0 mm Jacketed Individual Pack 1-5503948-1 -- 503911-1 1-5503948-0 5504931-5 5504932-5 -- -- -- 503911-1 492026-1 N/A 1-5503948-2 -- 503911-1 1-5503948-3 5504931-6 5504932-1 5503948-8 5504931-3 5504932-2 503911-1 492026-1 N/A 5503948-5 -- 503911-1 5503948-1 5504930-1 5504931-1 5504932-6 5504657-8 5504928-3 5504657-9 5504928-4 5504657-1 5504927-1 5504928-1 5503948-2 5504930-2 -- -- -- -- -- -- 5504657-2 5504927-2 -- 503911-1 492026-1 492026-1 N/A 503911-1 492026-1 503911-1 492026-1 503911-1 492026-1 492026-1 53 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog SC Connectors (Continued) SC Connector Components 3.0 mm Jacket 900 m Buffered Fiber 1.6 - 2.4 mm Jacket SC Duplex Clip (Black) Part Number 6348522-1 Use 2 pieces to duplex simplex housings SC Connector Component Selection Chart (bulk packaged) Fiber Type Simplex Connector Sub-Assembly 6457215-5 Duplex Clip* Cable Size (2) 6348522-1 6588714-3 (2) 6348522-1 5492123-7 (2) 6348522-1 Singlemode - GR-326 Style Singlemode - Polymer Crimp Body Multimode - Metal Crimp Body (Ceramic Ferrule) 6588715-5 (2) 6348522-1 Multimode - Polymer Crimp Body (Ceramic Ferrule) 5503948-7 (2) 6348522-1 3.0 mm 2.4 mm 1.6-2.0 mm 900 m 3.0 mm 2.4 mm 2.0 mm Crimp Eyelet w/ Heat Shrink -- 6588189-1 6374150-2 -- -- -- -- Crimp Eyelet 504973-3 -- -- -- 503970-3 503970-6 503970-9 900 m -- -- 2.4 mm 1.6-2.0 mm 900 m 3.0 mm 2.4 mm 2.0 mm 6588189-1 6374150-2 -- -- -- -- -- -- -- 503970-3 503970-6 503970-9 900 m -- -- Strain Relief Part Number** 1588491-X 1588153-X 1588153-X 1828184-X 5503971-X 5503971-X 5503971-X 6457493-X (long) 6278309-X (short) 1588153-X 1588153-X 1828184-X 5503971-X 5503971-X 5503971-X 6457493-X (long) 6278309-X (short) * For Fibre Channel compliant assemblies, use one (1) piece each of Part Number 503487-Y and 503488-Y. (Dash refers to color -- refer to customer drawing for details). ** Strain relief dash number indicates color - see page 55 for details. Note: All part numbers are RoHS compliant. 54 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog SC Connectors (Continued) Connectors/Adapters/ Tooling & Accessories SC Strain Reliefs -- Jacketed Cable 3.0 mm - GR-326 Style Description GR-326 Style 3.0 mm 2.4 mm 2.0 mm 3.0 mm 1.6 mm - 2.4 mm No No No Yes Yes Part Number Color Black 1-5503971-0 1-5503971-2 2-5503971-3 -- 1588153-3 Red 1-5503971-1 1-5503971-3 2-5503971-7 -- -- Beige 5503971-1 5503971-3 5503971-5 -- 1588153-5 Blue 5503971-2 5503971-4 5503971-6 1588491-2 1588153-2 1 SC Strain Reliefs -- Angled Black 1278705-3 1374737-3 6457543-4 Part Number Color Beige 1278705-2 1374737-2 6457543-1 Blue 1278705-1 1374737-1 6457543-2 Black 6457493-3 6278309-1 1828184-2 Part Number Color Beige 6457493-9 -- 1828184-4 Blue 6457493-1 6278309-2 1828184-1 3.0 mm Angled Description 3.0 mm 2.0 mm 2.0 mm Simplex Simplex 45 Simplex 900 m Short SC Strain Reliefs -- 900 micron Description Long (33 mm) 900 m Short (10 mm) 900 m GR-326 Style 900 m 900 m GR-326 Style 900 m SC Low Loss Loopback Connector Part Number 5503141-1 Part Number 5503141-2 Part Number 5504883-1 Product Facts Product Facts Product Facts 50/125 Multimode 62.5/125 Multimode Singlemode Use for Equipment Testing Use for Equipment Testing Use for Equipment Testing 0.6 dB Insertion Loss 0.8 dB Insertion Loss 1.5 dB Insertion Loss 0.5" Ferrule Centerline 0.5" Ferrule Centerline 0.5" Ferrule Centerline Note: All part numbers are RoHS compliant. 55 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog SC Connectors (Continued) Tight Jacketed SC Connectors Product Facts Multimode or singlemode Simplex or duplex Tested using MIL-PRF85045/16 2.0 mm cable SC Commercial Item Description (CID) interim approval by Naval Surface Warfare Center, Dahlgren Division The tight jacketed SC Connectors are non pullproof versions of the standard connectors that are designed for use with tight construction cable. Unlike standard connectors, this design allows the jacket and buffer to move together, reducing the chances of micro-bends and fiber breakage. Application In Flight Networks Shipboard Applications Aero Market Boot, Bend Limiting 56.9 [2.24] Crimp Eyelet / Heat Shrink Assembly Connector Sub Assembly Tight Jacketed SC Connector Kits Fiber Type Singlemode (blue body & straight boot) Multimode (beige body & straight boot) Kit Part Number 6828100-X 1828573-X 1918227-X 6828099-X 1828574-X 1918154-X Description Simplex, 1.6-2.0 mm Duplex, 1.6-2.0 mm Simplex, 2.4 mm Simplex, 1.6-2.0 mm Duplex, 1.6-2.0 mm Simplex, 2.4 mm Note: X = -1 for individual package, -2 for bulk package. Instruction Sheet 408-10015. See http://www.tycoelectronics.com/documents. Note: All part numbers are RoHS compliant. 56 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog SC Connectors (Continued) SC Simplex Adapter - Plastic Alignment Sleeve Material/Application Suitable for any SC connector Available with metal or ceramic alignment sleeves Choice of housing materials and colors Color coded to comply with 568C Aqua for 50/125 laser optimized Black for standard 50/125 Beige for 62.5/125 Blue for singlemode Housing Color Beige Black Aqua Beige Black Aqua Blue Beige Black Aqua Blue Green Metal/MM only Connectors/Adapters/ Tooling & Accessories SC Adapters Product Facts Metal SC Simplex Adapter - Plastic Ceramic Ceramic/APC Alignment Sleeve Material Slide-on cover available EMI gasketed parts available Housing Color Black Blue Black Aqua Blue Green Part Numbers Housing Color Electroless Nickel Electroless Nickel Part Numbers Metal Assortment of hybrid configurations available Mounting screws available Part Number 503663-1 5504614-1 5504614-3 5504614-4 5502632-9 5502632-7 2-5502632-3 5502632-8 1-5502632-2 1-5502632-0 2-5502632-4 1-5502632-1 1828028-2 1 Flangeless SC Simplex Adapter - Plastic Duplex adapters accept two simplex connectors or one duplex connector Part Numbers Ceramic Flangeless SC Simplex Adapter Plastic 5504632-1 5504632-3 5504632-2 5504632-6 5504632-4 5504632-5 SC Simplex Adapter - Metal Alignment Sleeve Material Metal Ceramic 6278348-1 6278348-3 SC Simplex Adapter - Metal Flangeless SC Simplex Adapter - Metal Alignment Sleeve Material Metal Ceramic Housing Color Electroless Nickel Electroless Nickel Part Numbers 6278348-5 6278348-7 Flangeless SC Simplex Adapter Metal SC Duplex Adapter - Plastic Alignment Sleeve Material/Application Metal/MM only Metal SC Duplex Adapter - Plastic Note: All part numbers are RoHS compliant. Ceramic Ceramic/APC Housing Color Beige Black Aqua Beige Black Aqua Blue Beige Black Aqua Blue Green Part Numbers 5504640-1 5504640-4 5504640-6 5502776-9 5502776-7 2-5502776-5 5502776-8 1-5502776-2 1-5502776-0 2-5502776-6 1-5502776-1 2-5502776-3 57 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog SC Connectors (Continued) SC Adapters (Continued) SC Duplex Adapter - Metal Alignment Sleeve Material Metal Ceramic Housing Color Electroless Nickel Electroless Nickel Part Numbers 6278049-1 6278049-3 SC Duplex Adapter Shielded SC Duplex Adapter - Metal Alignment Sleeve Material Metal Ceramic SC Duplex Metal Adapter w/ EMI Shielding SC to ST Hybrid Adapters Housing Color Electroless Nickel Electroless Nickel Designed to help prevent EMI leak Ideal for high-speed applications Part Numbers 6374223-1 6374223-3 SC to ST Simplex Adapter - Plastic Alignment Sleeve Material Metal SC to ST Simplex Adapter Plastic Ceramic Housing Color Beige Black Aqua Blue Beige Black Aqua Blue Part Numbers 5502780-3 5502780-1 2-5502780-0 5502780-2 5502780-6 5502780-4 2-5502780-1 5502780-5 SC to ST Simplex Adapter - Metal Alignment Sleeve Material Metal Ceramic Housing Color Electroless Nickel Electroless Nickel Part Numbers 6278350-1 6278350-3 SC to ST Simplex Adapter - Metal Note: All part numbers are RoHS compliant. 58 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog SC Connectors (Continued) Connectors/Adapters/ Tooling & Accessories SC to ST Hybrid Adapters (Continued) Flangeless SC to ST Simplex Adapter - Metal Alignment Sleeve Material Metal Ceramic Housing Color Electroless Nickel Electroless Nickel Part Numbers 6278350-5 6278350-7 Flangeless SC to ST Simplex Adapter - Metal 1 SC to ST Duplex Adapter - Plastic Alignment Sleeve Material Metal (MM Only) Metal SC to ST Duplex Adapter - Plastic Ceramic Housing Color Beige Black Aqua Beige Black Aqua Blue Beige Black Aqua Blue Part Numbers 5504663-4 5504663-6 5504663-5 5503137-3 5503137-1 2-5503137-1 5503137-2 5503137-6 5503137-4 1-5503137-9 5503137-5 SC to ST Duplex Adapter - Metal Alignment Sleeve Material Metal Ceramic Housing Color Electroless Nickel Electroless Nickel Part Numbers 6278051-1 6278051-3 SC to ST Duplex Adapter - Metal The Tyco Electronics slideon retractable cover is used for simplex or duplex SC applications. These retractable doors slip onto the end of existing Tyco Electronics adapters and can be mounted after the adapter has already been installed. Slide-on Retractable Cover for SC Simplex or Duplex Applications 1693539-1 -- Blue Simplex SC 1693539-2 -- Beige Simplex SC 1693539-3 -- Green Simplex SC 1693540-1 -- Blue Duplex SC 1693540-3 -- Green Duplex SC Note: All part numbers are RoHS compliant. 59 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog ST Connectors -- Epoxy Type Product Facts Ceramic Epoxy type connector Pre-radiused ceramic ferrule Available in bulk packages Crimp tool Part Number 58433-4 Singlemode Ceramic Performance Characteristics Insertion Loss -- 0.3 dB typical Back Reflection -- <-40 dB typical Durability -- 200 cycles Singlemode ST Connector Kits -- Ceramic Ferrule Body Coupling Nut Boot Color Zinc Yellow (900 m) Materials Ferrule Material -- Ceramic Body Material -- Nickel Plated Brass Coupling Nut Material -- Plated Die Cast Nickel-plated Brass Zinc Zinc Used With 900 m and 250 m Fibers 900 m and Yellow 250 m Fibers, (Bend-Limiting) 3.0 mm Cable 900 m and Yellow 250 m Fibers, (Short) 3.0 mm Cable Individual Pack Part Number Bulk Pack Part Number IS Sheet 5503613-2 5503613-3 408-9645 5502579-2 -- 408-9645 5502580-2 5502580-4 408-9645 Individual Pack Part Number -- Bulk Pack Part Number 503569-2 408-9971 503571-1 -- 408-9971 5503571-3 -- 408-9971 503677-2 -- 503677-1 5492458-2 408-9971 408-9645 5492458-1 -- 408-9645 5501380-1 -- 408-9645 1-5501380-6 2-5501380-0 408-9645 5502674-1 -- 408-9645 Ceramic Multimode Ceramic Performance Characteristics Insertion Loss -- 0.3 dB typical Durability -- 500 cycles Multimode ST Connector Kits -- Ceramic Ferrule Body Coupling Nut Boot Color Used With Black (Short) 3.0 mm Cable 900 m Fiber, 3.0 mm Cable 900 m and 250 m Fibers, 2.4 mm & 3.0 mm Cable 3.0 mm Cable 3.0 mm Cable 900 m and 3.0 mm Cable 900 m and 250 m Fibers, 2.4 mm & 3.0 mm Cable 2.4 mm & 3.0 mm Cable 900 m and 250 m Fibers, 2.4 mm & 3.0 mm Cable Black (Short) Polymer Polymer Black (Buffer)/ Black (Short) Zinc Nickel-plated Brass Zinc Black (Short) Black (Short) Black (Buffer)/ Black (Short) Black (Buffer)/ Black (Bend Limiting) Black (Short) Black (Right Angle) IS Sheet Note: All part numbers are RoHS compliant. 60 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog ST Connectors -- Epoxy Type (Continued) Connectors/Adapters/ Tooling & Accessories Polymer Composite Multimode Polymer Composite Performance Characteristics Insertion Loss -- 0.3 dB Typical Durability -- 500 Cycles Crimp Tool -- Part Number 58433-4 Instruction Sheet -- 408-9971 http://www.tycoelectronics.com/documents 1 Materials Ferrule -- Composite Polymer Body -- Polymer Coupling Nut -- Polymer Multimode ST Connector Kits -- Polymer Ferrule Body Coupling Nut Boot Color Used With Polymer Polymer Black (Buffer)/ Black (Short) 900 m and 250 m Fibers, 3.0 mm Cable 3.0 mm Cable Black (Short) Individual Pack Part Number Bulk Pack Part Number 5503415-1 -- -- 503424-3 Stainless Steel Multimode Stainless Steel Performance Characteristics Insertion Loss -- 0.3 dB Typical Operating Temp. Range -- -30C to +70C Durability -- 500 cycles Crimp Tool -- Part Number 58551-1 Instruction Sheet -- 408-4151 http://www.tycoelectronics.com/documents Materials Ferrule -- Stainless Steel Body -- Nickel plated brass Coupling Nut -- Zinc Multimode ST Connector Kits -- Stainless Steel Ferrule Body Ferrule Designation 125 Stainless Steel 140 231 240 280 Boot Color Used With Part Number Black (Bend Limiting) Black (Long) Black (Bend Limiting) Black (Bend Limiting) Black (Bend Limiting) Black (Short) 3.0 mm Cable 4.3 mm Cable 3.0 mm Cable 3.0 mm Cable 3.0 mm Cable 3.0 mm Cable 5504008-3 5504008-4 5504008-7 1-5504008-4 1-5504008-3 4-5504008-6 Note: All part numbers are RoHS compliant. 61 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog ST Connectors -- Epoxy Type (Continued) 58.00 [2.283] Long Boot PVC Tubing Crimp Eyelet Bare Buffer Boot 78.00 [3.071] TYGON Tubing Connector Assembly 47.00 [1.850] Short Boot 56.00 [2.205] HYTREL Tubing Protective Cover Right Angle Boot ST Connector Component Selection Chart (Bulk Packaged) Connector Sub-Assembly Fiber Type Singlemode Ceramic Ferrule Metal Body, Metal Nut 5502578-2 Multimode Ceramic Ferrule Metal Body, Metal Nut 5492458-5 Multimode Ceramic Ferrule Metal Body, Polymer Nut 5501458-8 Multimode Ceramic Ferrule Polymer Body, Metal Nut 503676-5 Multimode Ceramic Ferrule Polymer Body, Polymer Nut 503676-4 Cable Size 1.6-2.0 mm 2.4 mm 2.4 mm 3.0 mm 3.0 mm 900 m 1.6-2.0 mm 2.4 mm 2.4 mm 3.0 mm 3.0 mm 900 m 1.6-2.0 mm 2.4 mm 2.4 mm 3.0 mm 3.0 mm 900 m 1.6-2.0 mm 2.4 mm 2.4 mm 3.0 mm 3.0 mm 900 m 1.6-2.0 mm 2.4 mm 2.4 mm 3.0 mm 3.0 mm 900 m Crimp Eyelet 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 501971-3 Tubing 5501275-2 5501275-1 5501275-1 -- -- 502179-7 5501275-2 5501275-1 5501275-1 -- -- 502179-7 5501275-2 5501275-1 5501275-1 -- -- 502179-7 5501275-2 5501275-1 5501275-1 -- -- 502179-7 5501275-2 5501275-1 5501275-1 -- -- 502179-7 Strain Relief Part Number* 503219-X 502128-X 501457-X 502128-X 501457-X 5503628-X 503219-X 502128-X 501457-X 502128-X 501457-X 5503628-X 503219-X 502128-X 501457-X 502128-X 501457-X 5503628-X 503219-X 502128-X 501457-X 502128-X 501457-X 5503628-X 503219-X 502128-X 501457-X 502128-X 501457-X 5503628-X * Strain relief dash number indicates color - see chart on page 63 for details. TYGON is a trademark of Saint-Gobain Performance Plastics Corporation. HYTREL is a trademark of E.I. du Pont de Nemours and Company. Note: All part numbers are RoHS compliant. 62 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog ST Connectors -- Epoxy Type (Continued) Short Right Angle Buffer Connectors/Adapters/ Tooling & Accessories Bend Limiting Bend Limiting Strain Relief Bulk packages (100 pcs./package) Product Facts Color Bend Limiting Black Blue Beige 502128-1 502128-7 -- Short (3.0 mm) 501457-1 501457-5 501457-4 Right Angle Buffer 5502667-1 5502667-2 -- 5503628-1 -- 1-5503628-9 Short (2.0 mm) 503219-1 -- 503219-4 Bend Limiting (2.0 mm) 233454-4 233454-2 233454-6 1 ST Coupling Receptacles Free-hanging or panel mount design Alignment Sleeve Material Zirconia Ceramic Singlemode Packaging Single Bulk (1000) Single Bulk (50) Single Bulk (50) Part Number 501381-1 501381-2 504021-1 504021-2 502750-1 502750-2 Alignment Sleeve Material Metal/MM Only Metal/MM Only Color Beige Lt. Almond Part Number 504662-2 504662-1 Polymer Composite Multimode Metal Multimode ST Polymer Duplex Receptacle ST Active Device Mounts -- Multimode Product Facts Designed to accept multimode TO-18, TO-46 and TO-52 active devices Nickel plated, die cast zinc Mount to PCB or through panel Includes positioning ring Description Standard height Low profile Low profile Low profile Packaging Single Single Single (100) Bulk (50) Height .410 .280 .314 .314 Part Number 5501474-1 5502585-2 5504022-2 5504022-3 Note: All part numbers are RoHS compliant. 63 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog FC Connectors Product Facts One-piece connector body: Fastest assembly Compliant with: JIS C-5970 Pre-radiused ferrule Instruction Sheet -- 408-8674 http://www.tycoelectronics.com/documents Singlemode FC Connector Kits - Polymer Crimp Body Singlemode FC Connector Kits -- Polymer Crimp Body Boot Color Used With Blue 3.0 mm Jacketed 2.4 mm Jacketed 2.0 mm Jacketed 900 m Buffer Performance Characteristics Insertion Loss -- <0.2 dB Typical Return Loss -- <-59 dB Typical Durability -- 200 Cycles GR-326 Style FC Connector Kits - Metal Crimp Body Singlemode Bulk Pack Part Number 5504649-8 -- -- 5492052-5 Crimp Tool Crimp Tool 503911-1 492026-1 492026-1 N/A GR-326 Style Singlemode FC Connector Kits -- Metal Crimp Body Used With Individual Pack Part Number Bulk Pack Part Number 3.0 mm Jacketed 4-1918962-2 -- 2.4 mm Jacketed 2.0 mm Jacketed 900 m Buffer 6754264-5 6754264-4 6754264-2 6754264-6 6754264-7 -- Boot Color Performance Characteristics Insertion Loss -- <0.2 dB Typical Return Loss -- <-59 dB Typical Tested to GR-326 Tuning -- 6 position Individual Pack Part Number 5504649-1 5504914-2 5504915-2 -- Blue (1) 492131-1 (1) 58532-1 1588176-1 1588176-1 1588176-1 FC Strain Reliefs -- Jacketed Cable 3.0 mm - GR-326 Style 3.0 mm Angled Description GR-326 Style 3.0 mm 2.4 mm 2.0 mm 3.0 mm 1.6 mm - 2.4 mm No No No Yes Yes Part Number Color Black 1-5503971-0 1-5503971-2 2-5503971-3 -- 1588153-3 Red 1-5503971-1 1-5503971-3 2-5503971-7 -- -- Beige 5503971-1 5503971-3 5503971-5 -- 1588153-5 Blue 5503971-2 5503971-4 5503971-6 1588491-2 1588153-2 FC Strain Reliefs -- Angled Description 3.0 mm 2.0 mm 2.0 mm 900 m Short Simplex Simplex 45 Simplex Black 1278705-3 1374737-3 6457543-4 Part Number Color Beige 1278705-2 1374737-2 6457543-1 Blue 1278705-1 1374737-1 6457543-2 FC Strain Reliefs -- 900 micron Description 900 m Long (33 mm) 900 m Short (10 mm) 900 m GR-326 Style 900 m GR-326 Style 900 m Black 6457493-3 6278309-1 1828184-2 Part Number Color Beige 6457493-9 -- 1828184-4 Blue 6457493-1 6278309-2 1828184-1 Note: All part numbers are RoHS compliant. 64 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog FC Connectors (Continued) Connectors/Adapters/ Tooling & Accessories FC Connector Component Selection Chart (bulk packaged) Fiber Type Singlemode - GR-326 Style Singlemode Polymer Crimp Body Simplex Connector Crimp Eyelet w/ Crimp Sub-Assembly Cable Size Heat Shrink Eyelet 1.6-2.0 mm 6374150-1 -- 6754264-8 2.4 mm 6588189-1 -- 6457216-5 3.0 mm -- 504973-3 2.4 mm -- 503970-6 3.0 mm -- 503970-3 5504649-9 900 m -- -- 6374778-2 Multimode - Ceramic Ferrule 1.6-2.0 mm 2.4 mm 3.0 mm 6374150-1 6588189-1 -- -- -- 503970-3 900 m -- -- 5504922-3 Strain Relief Part Number* 1588153-X 1588153-X 1588491-X 5503971-X 5503971-X 6457493-X (long) 6278309-X (short) 1588153-X 1588153-X 5503971-2 6457493-9 (long) 6278309-1 (short) 1 * Strain relief dash number indicates color - see page 64 for details. FC Adapters FC Simplex Square Flange Adapter - Metal Alignment Sleeve Material Metal Ceramic Panel Cut-out Square Flange Square Flange Keyway Slot (Nom.) Std. 2.33 mm Std. 2.33 mm Part Numbers 5501506-2 5501506-1 FC Square Flange Adapter FC Simplex 8 mm/9 mm Dia. Round (D-Hole) Adapter - Metal Alignment Sleeve Material Metal (Copper) Panel Cut-out Ceramic D-Hole Ceramic/APC D-Hole Ceramic/APC D-Hole FC 8 mm/9 mm Dia. Round D-Hole Keyway Slot (Nom.) Std. 2.33 mm Std. 2.33 mm 2.05 mm Type R Prec. 2.02 mm Part Numbers 5504407-1 5504407-3 5504407-8 5504407-7 FC Simplex 8 mm Dia. Round (Double D-Hole) Adapter - Metal Alignment Sleeve Material Metal Panel Cut-out Double D-Hole Keyway Slot (Nom.) Std. 2.33 mm Part Numbers 5504013-1 FC 8 mm Dia. Round (Double D) Note: All part numbers are RoHS compliant. 65 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog FC Connectors (Continued) Hybrid Adapters - SC/FC/ST Hybrid FC to ST Simplex Adapter - Metal Alignment Sleeve Material Metal Ceramic Housing Color Electroless Nickel Electroless Nickel Part Numbers 5503640-1 5503640-2 FC to ST Simplex Adapter - Metal SC to FC Simplex Adapter - Plastic Alignment Sleeve Material Metal Ceramic Housing Color Black Blue Part Numbers 5502871-1 5502871-4 SC to FC Simplex Adapter - Plastic SC to FC Simplex Adapter - Metal Alignment Sleeve Material Metal Ceramic Housing Color Electroless Nickel Electroless Nickel Part Numbers 6278349-1 6278349-3 SC to FC Simplex Adapter - Metal Flangeless Simplex Adapter - Metal Alignment Sleeve Material Metal Ceramic Housing Color Electroless Nickel Electroless Nickel Part Numbers 6278349-5 6278349-7 Flangeless SC to FC Simplex Adapter - Metal SC to FC Duplex Adapter - Metal Alignment Sleeve Material Metal Ceramic Housing Color Electroless Nickel Electroless Nickel Part Numbers 6278050-1 6278050-3 SC to FC Duplex Adapter - Metal Note: All part numbers are RoHS compliant. 66 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog FSD Connector Components -- Multimode Connectors/Adapters/ Tooling & Accessories Product Facts Nut Meets specifications of FDDI PMD - ANSI X3.166 Ceramic ferrules available Designed in polarization and user defined keying Plug Housing Dust Cover Type M Key Strain Relief Performance Characteristics Insertion Loss -- 0.5 dB typical Durability -- Ceramic Ferrules 500 cycles 1 Type B Key Inner Crimp Ring Type A Key Outer Crimp Ring Ceramic Instruction Sheet Light Duty Dual Inner Eyelets 408-9373 http://www.tycoelectronics.com/documents Ferrule Assembly Plug Housing FSD Part Number Cable Type DUALAN Cable Light Duty DUALAN Cable Single Packed Bulk Packed Single Packed Bulk Packed Diameter (m) Ceramic Ferrules 125 5501780-1 5501780-3* 5502015-1 5502015-3* Replacement Ferrules 5501779-1 Termination Kit: 503746-6 * Bulk packed, 200 per package. Assembly Fixtures: with Polishing Tool: 501795-1; without Polishing Tool: 502023-1 Field Keyable FSD Receptacles and Adapters Multimode Receptacles Description FSD to FSD FSD to ST Sleeve Material Metal Ceramic 502806-2 502806-4 502808-2 502808-4 Note: All part numbers are RoHS compliant. 67 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog ESCON Connector Components ESCON Connector Plug Product Facts Multimode IBM Approved Simple field assembly Description 125 m DUALAN Cable DUALAN Cable Part Number Black 5492181-1 5492181-2* * Bulk packed, 50 per package Termination Kit: 503746-6. Performance Characteristics Assembly Loss -- 0.2 dB Typical Durability -- 200 cycles Instruction Sheet 408-9808 http://www.tycoelectronics.com/documents ESCON Receptacles Product Facts Description Multimode ESCON to ESCON ESCON to ST Part Number Black 502825-2 502826-2 ESCON Assembly Fixture Kit Used to hold ferrules during assembly, epoxy curing, and polishing. Allows simultaneous polishing of both ferrules. ESCON is a trademark of IBM Corporation. Description Without Polishing Bushing Polishing Bushing Part Number Black 492236-2 492269-1 Note: All part numbers are RoHS compliant. 68 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639 Fiber Optic Products Catalog FSMA Products -- Multimode Connectors/Adapters/ Tooling & Accessories Product Facts Industry compatible with 905 (FSMA-I) and 906 (FSMA-II) style connectors Terminates fiber sizes from 125 through 1000 microns in diameter Design parameters conform to NATO and IEC interface standards 1 Performance Characteristics Insertion Loss -- 1.3 dB Typical Temperature Range -- -55C to +105C Durability -- 200 cycles FSMA Connectors Ferrule Material Connector Body Material Fiber Diameter (m) Nickel-Plated Brass 125 140 231 336 720 1000 1050 2050 Documentation Product Specification 108-45106 Instruction Sheet 408-9863 FSMA 905 & 906 Test Report 501-359 http://www.tycoelectronics.com/documents Stainless Steel Adapter Product Facts Precision mating adapter for all FSMA connectors In-line splice or panel mount design Active Device Mount Product Facts Designed to house TO-18, TO-46, and TO-52 devices Constructed of nickel plated die cast zinc alloy or stainless steel Mounts to PC board or through panel Nominal Jacket O.D. 3.1 mm 905 906 5504566-1 5504014-1 5504566-2 1-5504014-0 5504566-7 -- 1-5504566-4 -- -- -- 3-5504566-0 -- 3-5504566-1 -- -- -- 4.3 mm 905 5504567-1 5504567-2 -- -- 3-5504567-9 -- 2-5504567-9 3-5504567-3 Description FSMA Adapters Hex Flange, Stainless Steel Hex Flange, Stainless Steel, Counterbore, Sealed Fixed Flange, Nickel-Plated Brass In-Line, Stainless Steel In-Line, Nickel-Plated Brass, Counterbore In-Line, Stainless Steel, Counterbore, Short Part Number Description FSMA Active Device Mounts PC Mount Receptacle, Die Cast PC Mount Receptacle, Die Cast, Bulk Packaged PC Mount Receptacle, Stainless Steel Part Number 501049-1 501050-1 5504026-1 504028-1 5504030-1 504031-1 5502136-1 5502136-2 501055-1 Note: All part numbers are RoHS compliant. 69 Catalog 1307895 Revised 11-07 www.tycoelectronics.com Dimensions are in millimeters and inches unless otherwise specified. Values in brackets are standard equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA: 1-800-522-6752 Canada: 1-905-470-4425 Mexico: 01-800-733-8926 C. America: 52-55-1106-0803 South America: 55-11-2103-6000 Hong Kong: 852-2735-1628 Japan: 81-44-844-8013 UK: 31-73-624-6639