PC107FS - Rev.1 - 01/11 PC107 PCI Bridge & Memory Controller Fact Sheet The PC107 PCI Bridge & Memory Controller provides a PowerPCTM architecture compliant bridge between PowerPC microprocessors and the Peripheral Component Interconnect (PCI) bus. PCI support allows system designers to design systems quickly using peripherals already designed for PCI and other standard interfaces available in the personal computer hardware environment. The PC107 provides many of the other necessities for embedded applications including a high performance memory controller and dual processor support, 2-channel flexible DMA controller, an interrupt controller, and IO-ready message unit, an IC controller, and low skew clock drivers. The PC107 contains an Embedded Programmable Interrupt Controller (EPIC) featuring five hardware interrupts (IRQs) as well as 16 serial interrupts along with 4 timers. The PC107 uses an advanced, 2.5V HiP3 process technology and is fully compatible with TTL devices. PC107 Main Features n n n n Multiprocessor and Local Bus Slave support - Supports PowerPC 603e TM , PowerPC 740TM, PowerPC 750TM or PowerPC 7400TM microprocessors - Operating bus frequency up to 100 MHz - Supports either a second processor or a local bus slave PCI Bus support Integrated memory controller - Controls processor and PCI interactions to main memory - Supports a variety of DRAM (FPM, EDO), SDRAM, and ROM/Flash ROM up to 100 MHz Power Management - Provides hardware support for 4 level of power reduction: nap, doze, sleep and suspend - Fully static design preserving internal logic states during power saving modes 60X Bus 60X 60XInterface Interface Data Path ECC Controller I2O DMA Memory Interface Central Central Control Control Unit Unit Fast/EDO DRAM, SDRAM, Control ROM, FLASH Addr SDRAM_SYNC_IN I2C DLL SDRAM Clocks CPU Clocks PLL PCI_SYNC_IN EPIC PCI Interface Timers Data Address Translator PCI Arbiter 32-bit PCI Interface 5 Req/Gnt Pairs Fanout Buffers OSC_IN PCI Bus Clocks PC107 Technical Specifications n Processor Interface n PCI Interface n Compliant with PCI specification, revision 2.1 32-bit PCI interface operates up to 66 MHz PCI 5.0V tolerant Read and write buffers to improve PCI performance Selectable big or little endian operation PCI interface can be configured as host or agent, allowing multiple PC107 chips on same PCI bus Arbiter supports up to 5 other PCI devices Parity support Memory Interface n Processor bus frequency up to 100 MHz 64-bit or 32-bit data bus and 32-bit address bus SMP support for a second processor Full memory coherency supported, integrated arbiter and slave peripheral support JTAG/COP for in-circuit hardware debugging IEEE 1149.1 compliant, JTAG boundary-scan interface High bandwidth (32/64-bit) data bus up to 100 MHz Programmable timing supporting either DRAM (FPM, EDO) or SDRAM Support 1 to 8 banks - 4MB, 16MB, 64MB, 128MB, and/or 256MB DRAMs or SDRAMs 1GB of RAM space, 144MB of ROM space 8-bit, 32-bit or 64-bit ROM/Flash ROM PortX: 8-, 32-, or 64-bit general-purpose I/O port uses ROM controller interface with address strobe Supports parity, read-modify-write, or error correcting code (ECC) Other Embedded Features - Two-Channel integrated DMA controller Message Unit and IC controller Embedded Programmable Interrupt Controller (EPIC) Integrated PCI bus and SDRAM clock generation Programmable PCI and memory bus drivers n Packaging n Screening - 503 Flip-Chip PBGA package - FC-PBGA upscreening based upon ATMEL-Grenoble standards - Full military temperature range (Tj = -55C, + 125C) - Industrial temperature range (Tj = -40C, +110C) PC107A M ZF U 100 L x Revision level Type B: Rev. 1.2 Temperature range : Tj Bus divider (to be confirmed) M: -55, +125C V: -40, +110C L: Any valid PLL configuration Package: Operating Frequency 100: 100 MHz ZF: FC-PBGA Screening level: U: UpscreeningTest For additional information: contact your local ATMEL-Grenoble representative or visit our web site at http://www.atmel-grenoble.com You may also contact the PowerPC technical hotline at std.hotline@atmel-grenoble.com The PowerPC and PowerPC603e names and the PowerPC logotype are trademarks of International Business Machines Corporation, used under license therefrom. BP123 - 38521 Saint- Egreve Cedex - France - Tel: +33 (0)4 76 58 30 00 - Fax: +33 (0)4 76 58 34 80