BYM12-50 thru BYM12-400, EGL41A thru EGL41G Vishay General Semiconductor Surface Mount Glass Passivated Ultrafast Rectifier FEATURES * Cavity-free glass-passivated junction * Ideal for automated placement * Ultrafast reverse recovery time * Low switching losses, high efficiency * High forward surge capability * Meets environmental standard MIL-S-19500 * Meets MSL level 1, per J-STD-020C, LF max peak of 250 C * Solder Dip 260 C, 40 seconds * Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC (R) ed* t n e Pat *Glass-plastic encapsulation is covered by Patent No. 3,996,602, brazed-lead assembly to Patent No. 3,930,306 DO-213AB (GL41) TYPICAL APPLICATIONS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer, automotive and telecommunication. MAJOR RATINGS AND CHARACTERISTICS IF(AV) 1.0 A VRRM 50 V to 400 V IFSM 30 A trr 50 ns VF 1.0 V, 1.25 V Tj max. 175 C MECHANICAL DATA Case: DO-213AB, molded epoxy over glass body Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D E3 suffix for commercial grade, HE3 suffix for high reliability grade (AEC Q101 qualified) Polarity: Two bands indicate cathode end - 1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating MAXIMUM RATINGS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL BYM12-50 BYM12-100 BYM12-150 BYM12-200 BYM12-300 BYM12-400 UNIT Fast efficient device: 1st band is Green Polarity color bands (2nd Band) EGL41A EGL41B EGL41C EGL41D EGL41F EGL41G Gray Red Pink Orange Brown Yellow 100 150 200 300 400 V Maximum repetitive peak reverse voltage VRRM 50 Maximum RMS voltage VRMS 35 70 105 140 210 280 V Maximum DC blocking voltage VDC 50 100 150 200 300 400 V Maximum average forward rectified current at TT = 75 C IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A TJ, TSTG - 65 to + 175 C Operating junction and storage temperature range Document Number 88581 26-Jun-06 www.vishay.com 1 BYM12-50 thru BYM12-400, EGL41A thru EGL41G Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL BYM12-50 BYM12-100 EGL41A EGL41B BYM12-150 BYM12-200 BYM12-300 BYM12-400 EGL41C EGL41D EGL41F UNIT EGL41G Maximum instantaneous forward voltage (1) at 1.0 A VF Maximum DC reverse current at rated DC blocking voltage (1) TA = 25 C TA = 125 C IR 5.0 50 A Max. reverse recovery time at IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 50 ns Typical junction capacitance at 4.0 V, 1 MHz CJ 1.0 1.25 20 V 14 pF Note: (1) Pulse test: 300 s pulse width, 1 % duty cycle THERMAL CHARACTERISTICS (TA = 25 C unless otherwise noted) PARAMETER SYMBOL Maximum thermal resistance (1,2) BYM12-50 BYM12-100 BYM12-150 EGL41A EGL41B EGL41C RJA RJT BYM12-200 BYM12-300 BYM12-400 EGL41D EGL41F EGL41G 60 30 UNIT C/W Note: (1) Thermal resistance from junction to ambient, 0.24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal (2) Thermal resistance from junction to terminal, 0.24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal ORDERING INFORMATION PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE EGL41D-E3/96 0.114 96 1500 7" Diameter Plastic Tape & Reel EGL41D-E3/97 0.114 97 5000 13" Diameter Plastic Tape & Reel www.vishay.com 2 Document Number 88581 26-Jun-06 BYM12-50 thru BYM12-400, EGL41A thru EGL41G Vishay General Semiconductor 1.0 1000 Instantaneous Reverse Leakage Current (A) Average Forward Rectified Current (A) RATINGS AND CHARACTERISTICS CURVES (TA = 25 C unless otherwise noted) 0.5 Resistive or Inductive Load 0 Tj = 150 C 10 Tj = 100 C 1 0.1 Tj = 25 C 0.01 0 25 50 75 100 125 150 175 0 20 40 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 1. Maximum Forward Current Derating Curve Figure 4. Typical Reverse Leakage Characteristics 70 Tj = Tj max. 8.3 ms Single Half Sine-Wave Tj = 25 C f = 1.0 MHz Vsig = 50 mVp-p 60 Junction Capacitance (pF) 25 20 15 10 5.0 50 40 30 20 10 0 EGL41A - EGL41D EGL41F - EGL41G 0 1 10 100 0.1 1 Number of Cycles at 60 Hz Transient Thermal Impedance (C/W) 100 Pulse Width = 300 s 1 % Duty Cycle Tj = 150 C 1 Tj = 25 C 0.1 EGL41A - EGL41D EGL41F - EGL41G 0.01 0.2 100 Figure 5. Typical Junction Capacitance 50 10 10 Reverse Voltage (V) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Instantaneous Forward Current (A) 60 Lead Temperature (C) 30 Peak Forward Surge Current (A) 100 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Instantaneous Forward Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Document Number 88581 26-Jun-06 10 1 0.1 0.01 0.1 1 10 100 t - Pulse Duration (s) Figure 6. Typical Transient Thermal Impedance www.vishay.com 3 BYM12-50 thru BYM12-400, EGL41A thru EGL41G Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-213AB (GL41) Mounting Pad Layout SOLDERABLE ENDS 1st Band 0 D2 = D1 + - 0.008 (0.20) 0.138 MAX (3.5) MAX D2 0.022 (0.56) 0.018 (0.46) D1 = 0.105 0.095 (2.67) (2.41) 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185 (4.7) 0.118 MIN (3.0) MIN 0.049 MIN (1.25) MIN 0.238 (6.0) REF 1st band denotes type and positive end (cathode) www.vishay.com 4 Document Number 88581 26-Jun-06 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1