8-Bit, 250 MSPS 3.3 V A/D Converter AD9481 FEATURES AGND DRGND T AND H VIN- DS+ 8-BIT ADC PIPELINE CORE GENERAL DESCRIPTION PORT A 8 PORT B 8 D7A TO D0A 8 D7B TO D0B DS- CLK+ CLK- CLOCK MGMT DCO+ DCO- LOGIC APPLICATIONS Digital oscilloscopes Instrumentation and measurement Communications Point-to-point radios Digital predistortion loops AVDD AD9481 REFERENCE VIN+ DRVDD PDWN S1 05045-001 DNL = 0.35 LSB INL = 0.26 LSB Single 3.3 V supply operation (3.0 V to 3.6 V) Power dissipation of 439 mW at 250 MSPS 1 V p-p analog input range Internal 1.0 V reference Single-ended or differential analog inputs De-multiplexed CMOS outputs Power-down mode Clock duty cycle stabilizer FUNCTIONAL BLOCK DIAGRAM VREF SENSE Figure 1. The AD9481 is available in a Pb-free, 44-lead, surface-mount package (TQFP-44) specified over the industrial temperature range (-40C to +85C). The AD9481 is an 8-bit, monolithic analog-to-digital converter (ADC) optimized for high speed and low power consumption. Small in size and easy to use, the product operates at a 250 MSPS conversion rate, with excellent linearity and dynamic performance over its full operating range. PRODUCT HIGHLIGHTS To minimize system cost and power dissipation, the AD9481 includes an internal reference and track-and-hold circuit. The user only provides a 3.3 V power supply and a differential encode clock. No external reference or driver components are required for many applications. 2. Power-down mode. A power-down function may be exercised to bring total consumption down to 15 mW. The digital outputs are TTL/CMOS-compatible with an option of twos complement or binary output format. The output data bits are provided in an interleaved fashion along with output clocks that simplifies data capture. 1. Superior linearity. A DNL of 0.35 makes the AD9481 suitable for many instrumentation and measurement applications 3. De-multiplexed CMOS outputs allow for easy interfacing with low cost FPGAs and standard logic. Rev. 0 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.326.8703 (c) 2004 Analog Devices, Inc. All rights reserved. AD9481 TABLE OF CONTENTS DC Specifications ............................................................................. 3 Data Clock Out........................................................................... 20 Digital Specifications........................................................................ 4 Power-Down Input..................................................................... 20 AC Specifications.............................................................................. 5 AD9481 Evaluation Board ............................................................ 21 Switching Specifications .................................................................. 6 Power Connector........................................................................ 21 Timing Diagram ........................................................................... 7 Analog Inputs.............................................................................. 21 Absolute Maximum Ratings............................................................ 8 Gain.............................................................................................. 21 Explanation of Test Levels........................................................... 8 Optional Operational Amplifier............................................... 21 ESD Caution.................................................................................. 8 Clock ............................................................................................ 21 Pin Configuration and Function Descriptions............................. 9 Optional Clock Buffer ............................................................... 21 Terminology .................................................................................... 10 DS ................................................................................................. 21 Typical Performance Characteristics ........................................... 12 Optional XTAL ........................................................................... 22 Equivalent Circuits ......................................................................... 16 Voltage Reference ....................................................................... 22 Applications..................................................................................... 17 Data Outputs............................................................................... 22 Analog Inputs.............................................................................. 17 Evaluation Board Bill of Materials (BOM) ................................. 23 Voltage Reference ....................................................................... 17 PCB Schematics .............................................................................. 24 Clocking the AD9481................................................................. 19 PCB Layers ...................................................................................... 26 DS Inputs ..................................................................................... 19 Outline Dimensions ....................................................................... 28 Digital Outputs ........................................................................... 20 Ordering Guide .......................................................................... 28 Interleaving Two AD9481s........................................................ 20 REVISION HISTORY 10/04--Revision 0: Initial Version Rev. 0 | Page 2 of 28 AD9481 DC SPECIFICATIONS AVDD = 3.3 V, DRVDD = 3.3 V; TMIN = -40C, TMAX = +85C, AIN = -1 dBFS, full scale = 1.0 V, internal reference, differential analog and clock inputs, unless otherwise noted. Table 1. Parameter RESOLUTION ACCURACY No Missing Codes Offset Error Gain Error1 Differential Nonlinearity (DNL) Integral Nonlinearity (INL) TEMPERATURE DRIFT Offset Error Gain Error Reference REFERENCE Internal Reference Voltage Output Current2 IVREF Input Current3 ISENSE Input Current2 ANALOG INPUTS (VIN+, VIN-) Differential Input Voltage Range4 Common-Mode Voltage Input Resistance Input Capacitance Analog Bandwidth, Full Power POWER SUPPLY AVDD DRVDD Supply Currents IAVDD5 IDRVDD5 Power Dissipation5 Power-Down Dissipation Power Supply Rejection Ratio (PSRR) Temp Test Level Min Full 25C 25C Full Full VI I I VI VI -40 -6.0 -0.85 -0.9 Full Full Full V V V Full 25C 25C 25C VI IV I I Full Full Full 25C 25C V VI VI V V Full Full IV IV Full Full 25C 25C 25C VI VI V V V 1 AD9481-250 Typ 8 Max Unit Bits 40 6.0 0.85 0.9 mV % FS LSB LSB Guaranteed 0.35 0.26 30 0.03 0.025 0.97 1.6 8.4 3.0 3.0 1.0 1 1.9 10 4 750 V/C % FS/C mV/C 1.03 1.5 100 10 2.1 11.2 V mA A A V p-p V k pF MHz 3.3 3.3 3.6 3.6 V V 133 39 439 15 -4.2 145 42.5 mA mA mW mW mV/V 37 Gain error and gain temperature coefficients are based on the ADC only (with a fixed 1 V external reference and 1 V p-p input range). Internal reference mode; SENSE = AGND. External reference mode; VREF driven by external 1.0 V reference; SENSE = AVDD. 4 In FS = 1 V, both analog inputs are 500 mV p-p and out of phase with each other. 5 Supply current measured with rated encode and a 20 MHz analog input. Power dissipation measured with dc input, see the Terminology section for power vs. clock rate. 2 3 Rev. 0 | Page 3 of 28 AD9481 DIGITAL SPECIFICATIONS AVDD = 3.3 V, DRVDD = 3.3 V; TMIN = -40C, TMAX = +85C, AIN = -1 dBFS, full scale = 1.0 V, internal reference, differential analog and clock inputs, unless otherwise noted. Table 2. Parameter CLOCK AND DS INPUTS (CLK+, CLK-, DS+, DS-) Differential Input Common-Mode Voltage1 Input Resistance Input Capacitance LOGIC INPUTS (PDWN, S1) Logic 1 Voltage Logic 0 Voltage Logic 1 Input Current Logic 0 input Current Input Resistance Input Capacitance DIGITAL OUTPUTS Logic 1 Voltage2 Logic 0 Voltage Output Coding 1 2 AD9481-250 Typ Temp Test Level Min Full Full Full 25C IV VI VI V 200 1.38 4.2 Full Full Full Full 25C 25C IV IV VI VI V V 2.0 Full Full Full VI VI IV DRVDD - 0.05 The common mode for CLOCK inputs can be externally set, such that 0.9 V < CLK < 2.6 V. Capacitive loading only. Rev. 0 | Page 4 of 28 1.5 5.5 4 Max Unit 1.68 6.0 mV p-p V k pF 0.8 160 10 30 4 0.05 Twos complement or binary V V A A k pF mV V AD9481 AC SPECIFICATIONS AVDD = 3.3 V, DRVDD = 3.3 V; TMIN = -40C, TMAX = +85C, AIN = -1 dBFS, full scale = 1.0 V, internal reference, differential analog and clock inputs, unless otherwise noted. Table 3. Parameter SIGNAL-TO-NOISE RATIO (SNR) fIN = 19.7 MHz fIN = 70.1 MHz SIGNAL-TO-NOISE AND DISTORTION (SINAD) fIN = 19.7 MHz fIN = 70.1 MHz EFFECTIVE NUMBER OF BITS (ENOB) fIN = 19.7 MHz fIN = 70.1 MHz WORST SECOND OR THIRD HARMONIC DISTORTION fIN = 19.7 MHz fIN = 70.1 MHz WORST OTHER fIN = 19.7 MHz fIN = 70.1 MHz SPURIOUS-FREE DYNAMIC RANGE (SFDR)1 fIN = 19.7 MHz fIN = 70.1 MHz TWO-TONE INTERMODULATION DISTORTION (IMD) fIN1 = 69.3 MHz, fIN2 = 70.3 MHz 1 AD9481-250 Typ Max Temp Test Level Min 25C 25C V I 44.5 46 45.7 dB dB 25C 25C V I 44.4 45.9 45.7 dB dB 25C 25C V I 7.2 7.5 7.5 Bits Bits 25C 25C V I -64.8 -64.8 -54 dBc dBc 25C 25C V I -68 -65.8 -56 dBc dBc 25C 25C V I -64.8 -64.8 -54 dBc dBc 25C V -64.9 DC and Nyquist bin energy ignored. Rev. 0 | Page 5 of 28 Unit dBc AD9481 SWITCHING SPECIFICATIONS AVDD = 3.3 V, DRVDD = 3.3 V; differential encode input, duty cycle stabilizer enabled, unless otherwise noted. Table 4. Parameter CLOCK Maximum Conversion Rate Minimum Conversion Rate Clock Pulse-Width High (tEH) Clock Pulse-Width Low (tEL) DS Input Setup Time (tSDS) DS Input Hold Time (tHDS) OUTPUT PARAMETERS1 Valid Time (tV)2 Propagation Delay (tPD) Rise Time (tR) 10% to 90% Fall Time (tF) 10% to 90% DCO Propagation Delay (tCPD) 3 Data-to-DCO Skew (tPD - tCPD)4 A Port Data to DCO- Rising (tSKA)5 B Port Data to DCO+ Rising (tSKB) Pipeline Latency (A, B) APERTURE Aperture Delay (tA) Aperture Uncertainty (Jitter) OUT-OF-RANGE RECOVERY TIME Temp Test Level Min Full Full Full Full Full Full VI IV IV IV IV IV 250 Full Full Full Full Full Full Full Full Full VI VI V V VI VI IV IV IV 25C 25C 25C V V V 1 CLOAD equals 5 pF maximum for all output switching specifications. Valid time is approximately equal to minimum tPD. 3 TCPD equals clock rising edge to DCO (+ or -) rising edge delay. 4 Data changing to (DCO+ or DCO-) rising edge delay. 5 TSKA, TSKB are both clock rate dependent delays equal to TCYCLE - (Data to DCO skew). 2 Rev. 0 | Page 6 of 28 AD9481-250 Typ Max 20 1.2 1.2 0.5 0.5 2 2 2.5 2.5 -0.5 Unit MSPS MSPS ns ns ns ns 4 4 8 ns ns ps ps ns ns ns ns Cycles 1.5 0.25 1 ns ps rms Cycle 4 670 360 3.9 5.4 5.3 +0.5 AD9481 TIMING DIAGRAM N-1 N+9 tA N+8 N N+10 VIN N+1 N+7 8 CYCLES tEH tEL 1/fS CLK+ CLK- tHDS DS+ DS- tSDS tV INTERLEAVED DATA OUT tPD PORT A STATIC INVALID N D7A TO D0A PORT B STATIC INVALID INVALID N+1 tSKA tCPD DCO+ DCO- STATIC Figure 2. Timing Diagram Rev. 0 | Page 7 of 28 tSKB 05045-002 D7B TO D0B AD9481 ABSOLUTE MAXIMUM RATINGS Thermal impedance (JA) = 46.4C/W (4-layer PCB). EXPLANATION OF TEST LEVELS Table 5. Table 6. Parameter ELECTRICAL AVDD (With respect to AGND) DRVDD (With respect to DRGND) AGND (With respect to DRGND) Digital I/0 (With respect to DRGND) Analog Inputs (With respect to AGND) ENVIRONMENTAL Operating Temperature Junction Temperature Storage Temperature Min. Rating Max. Rating -0.5 V -0.5 V +4.0 V +4.0 V -0.5 V -0.5 V +0.5 V DRVDD + 0.5 V -0.5 V AVDD + 0.5 V -40C +85C 150C 150C Level I II III IV V VI Description 100% production tested. 100% production tested at 25C and guaranteed by design and characterization at specified temperatures. Sample tested only. Parameter is guaranteed by design and characterization testing. Parameter is a typical value only. 100% production tested at 25C and guaranteed by design and characterization for industrial temperature range. Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ESD CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although this product features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. Rev. 0 | Page 8 of 28 AD9481 VREF AGND AVDD AGND VIN- VIN+ AGND AVDD S3 DS- DS+ PIN CONFIGURATION AND FUNCTION DESCRIPTIONS 44 43 42 41 40 39 38 37 36 35 34 CLK+ 1 33 SENSE 32 AGND 31 AVDD 30 AVDD 29 PDWN 28 S1 D7A (MSB) 7 27 DRGND D6A 8 26 D7B (MSB) D5A 9 25 D6B D4A 10 24 D5B D3A 11 23 D4B PIN 1 CLK- 2 AVDD 3 AGND 4 AD9481 DRVDD 5 TOP VIEW (Not to Scale) DRGND 6 05045-003 D3B D2B D1B D0B (LSB) DRVDD DCO+ DCO- DRGND D0A (LSB) D1A D2A 12 13 14 15 16 17 18 19 20 21 22 Figure 3. Pin Configuration Table 7. Pin Function Descriptions Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Name CLK+ CLK- AVDD AGND DRVDD DRGND D7A D6A D5A D4A D3A D2A D1A D0A DRGND DCO- DCO+ DRVDD D0B D1B D2B D3B D4B D5B Description Input Clock--True Input Clock--Complement 3.3 V Analog Supply Analog Ground 3.3 V Digital Output Supply Digital Ground Data Output Bit 7--Channel A (MSB) Data Output Bit 6--Channel A Data Output Bit 5--Channel A Data Output Bit 4--Channel A Data Output Bit 3--Channel A Data Output Bit 2--Channel A Data Output Bit 1--Channel A Data Output Bit 0--Channel A (LSB) Digital Ground Data Clock Output--Complement Data Clock Output--True 3.3 V Digital Output Supply Data Output Bit 0--Channel B (LSB) Data Output Bit 1--Channel B Data Output Bit 2--Channel B Data Output Bit 3--Channel B Data Output Bit 4--Channel B Data Output Bit 5--Channel B Pin No. 25 26 27 28 Name D6B D7B DRGND S1 29 30 31 32 33 34 35 36 37 38 39 40 41 42 PDWN AVDD AVDD AGND SENSE VREF AGND AVDD AGND VIN- VIN+ AGND AVDD S3 43 DS- 44 DS+ Rev. 0 | Page 9 of 28 Description Data Output Bit 6--Channel B Data Output Bit 7--Channel B (MSB) Digital Ground Data Format Select and Duty Cycle Stabilizer Select Power-Down Selection 3.3 V Analog Supply 3.3 V Analog Supply Analog Ground Reference Mode Selection Voltage Reference Input/Output Analog Ground 3.3 V Analog Supply Analog Ground Analog Input--Complement Analog Input--True Analog Ground 3.3 V Analog Supply DCO Enable Select (Tie to AVDD for DCO Active) Data Sync Complement (If Unused, Tie to DRVDD) Data Sync True (If Unused, Tie to DGND) AD9481 TERMINOLOGY Analog Bandwidth The analog input frequency at which the spectral power of the fundamental frequency (as determined by the FFT analysis) is reduced by 3 dB. Full-Scale Input Power Expressed in dBm. Computed using the following equation V 2 FULLSCALE rms Z INPUT PowerFULLSCALE = 10 log 0.001 Aperture Delay The delay between the 50% point of the rising edge of the encode command and the instant the analog input is sampled. Gain Error Gain error is the difference between the measured and ideal full-scale input voltage range of the ADC. Aperture Uncertainty (Jitter) The sample-to-sample variation in aperture delay. Clock Pulse-Width/Duty Cycle Pulse-width high is the minimum amount of time that the clock pulse should be left in a Logic 1 state to achieve rated performance; pulse-width low is the minimum time clock pulse should be left in a low state. See timing implications of changing tEH in the Clocking the AD9481 section. At a given clock rate, these specifications define an acceptable clock duty cycle. Crosstalk Coupling onto one channel being driven by a low level (-40 dBFS) signal when the adjacent interfering channel is driven by a full-scale signal. Harmonic Distortion, Second The ratio of the rms signal amplitude to the rms value of the second harmonic component, reported in dBc. Harmonic Distortion, Third The ratio of the rms signal amplitude to the rms value of the third harmonic component, reported in dBc. Integral Nonlinearity The deviation of the transfer function from a reference line measured in fractions of 1 LSB using a best straight line determined by a least square curve fit. Differential Analog Input Resistance, Differential Analog Input Capacitance, and Differential Analog Input Impedance The real and complex impedances measured at each analog input port. The resistance is measured statically and the capacitance and differential input impedances are measured with a network analyzer. Differential Analog Input Voltage Range The peak-to-peak differential voltage that must be applied to the converter to generate a full-scale response. Peak differential voltage is computed by observing the voltage on a single pin and subtracting the voltage from the other pin, which is 180 out of phase. Peak-to-peak differential is computed by rotating the inputs phase 180 and taking the peak measurement again. The difference is then computed between both peak measurements. Minimum Conversion Rate The encode rate at which the SNR of the lowest analog signal frequency drops by no more than 3 dB below the guaranteed limit. Maximum Conversion Rate The encode rate at which parametric testing is performed. Output Propagation Delay The delay between a differential crossing of CLK+ and CLK- and the time when all output data bits are within valid logic levels. Noise (for Any Range within the ADC) This value includes both thermal and quantization noise. - SNRdBc - SignaldBFS FS Vnoise = Z x 0 .001 x 10 dBm 10 Differential Nonlinearity The deviation of any code width from an ideal 1 LSB step. Effective Number of Bits (ENOB) ENOB is calculated from the measured SINAD based on the equation (assuming full-scale input) SINADMEASURED - 1.76 dB ENOB = 6.02 where: Z is the input impedance. FS is the full scale of the device for the frequency in question. SNR is the value for the particular input level. Signal is the signal level within the ADC reported in dB below full scale. Rev. 0 | Page 10 of 28 AD9481 Power Supply Rejection Ratio The ratio of a change in input offset voltage to a change in power supply voltage. Signal-to-Noise and Distortion (SINAD) The ratio of the rms signal amplitude (set 1 dB below full scale) to the rms value of the sum of all other spectral components, including harmonics, but excluding dc. Signal-to-Noise Ratio (without Harmonics) The ratio of the rms signal amplitude (set at 1 dB below full scale) to the rms value of the sum of all other spectral components, excluding the first five harmonics and dc. Spurious-Free Dynamic Range (SFDR) The ratio of the rms signal amplitude to the rms value of the peak spurious spectral component. The peak spurious component may or may not be a harmonic. It also may be reported in dBc (degrades as signal level is lowered) or dBFS (always related back to converter full scale). Two-Tone Intermodulation Distortion Rejection The ratio of the rms value of either input tone to the rms value of the worst third-order intermodulation product, in dBc. Two-Tone SFDR The ratio of the rms value of either input tone to the rms value of the peak spurious component. The peak spurious component may or may not be an IMD product. It also may be reported in dBc (degrades as signal level is lowered) or in dBFS (always relates back to converter full scale). Worst Other Spur The ratio of the rms signal amplitude to the rms value of the worst spurious component (excluding the second and third harmonic), reported in dBc. Transient Response Time The time it takes for the ADC to reacquire the analog input after a transient from 10% above negative full scale to 10% below positive full scale. Out-of-Range Recovery Time This is the time it takes for the ADC to reacquire the analog input after a transient from 10% above positive full scale to 10% above negative full scale, or from 10% below negative full scale to 10% below positive full scale. Rev. 0 | Page 11 of 28 AD9481 TYPICAL PERFORMANCE CHARACTERISTICS AVDD, DRVDD = 3.3 V, T = 25C, AIN differential drive, FS = 1, internal reference mode, unless otherwise noted. 0 0 SNR = 45.8dB H2 = -65.2dBc H3 = -63.2dBc SFDR = 63.2dBc -20 -30 -30 -40 -40 -50 -50 -60 -60 -70 -70 -90 0 20 40 60 (MHz) 80 100 05045-007 (dB) -20 -80 SNR = 45.6dB H2 = -72.9dBc H3 = -65.2dBc SFDR = 59.6dBc -10 05045-004 (dB) -10 -80 -90 120 0 Figure 4. FFT: fS = 250 MSPS, AIN = 10.3 MHz @ -1 dBFS 20 40 60 (MHz) 80 100 120 Figure 7. FFT: fS = 250 MSPS, AIN = 170 MHz @ -1 dBFS 0 90 SNR = 45.8dB H2 = -68.5dBc H3 = -63.5dBc SFDR = 63.8dBc -10 85 80 -20 H3 75 -30 H2 70 (dB) (dB) -40 -50 65 60 -60 55 SFDR -70 50 -90 0 20 40 60 (MHz) 80 100 05045-008 SNR 05045-005 -80 45 SINAD 40 0 120 Figure 5. FFT: fS = 250 MSPS, AIN = 70 MHz @ -1 dBFS 50 100 150 200 250 AIN (MHz) 300 350 400 350 400 Figure 8. Analog Input Frequency Sweep, AIN = -1 dBFS, FS = 1 V, fS = 250 MSPS 0 90 SNR = 45.9dB H2 = -66.6dBc H3 = -70.1dBc SFDR = 65.9dBc -10 85 80 -20 H3 75 -30 H2 70 (dB) (dB) -40 -50 65 60 SFDR -60 55 -70 -90 0 20 40 60 (MHz) 80 100 SNR 45 SINAD 40 0 120 Figure 6. FFT: fS = 250 MSPS, AIN = 70 MHz @ -1 dBFS, Single-Ended Input Rev. 0 | Page 12 of 28 05045-009 05045-006 50 -80 50 100 150 200 250 AIN (MHz) 300 Figure 9. Analog Input Frequency Sweep, AIN =-1 dBFS, FS = 0.75 V, fS = 250 MSPS, External VREF Mode AD9481 75 140 IAVDD 70 120 SFDR CURRENT (mA) 65 (dB) 60 55 100 80 60 40 50 SNR IDRVDD SINAD 40 0 50 100 150 200 SAMPLE CLOCK (MHz) 250 05045-013 05045-010 20 45 0 0 300 50 100 150 200 SAMPLE CLOCK (MSPS) 250 300 Figure 13. IAVDD and IDRVDD vs. Clock Rate, CLOAD = 5 pF AIN = 70 MHz @ -1 dBFS Figure 10. SNR, SINAD, SFDR vs. Sample Clock Frequency, AIN = 70 MHz @ -1 dB 50 80 49 70 SFDR (dBFS) 48 60 DCS ON 47 46 (dB) (dB) 50 40 SFDR (dBc) 45 44 30 DCS OFF 43 20 60dB REFERENCE LINE -60 -50 -40 -30 -20 -10 ANALOG INPUT DRIVE LEVEL (dBFS) 41 40 20 0 Figure 11. SFDR vs. AIN Input Level; AIN = 70 MHz @ 250 MSPS 30 40 50 60 70 CLOCK POSITIVE DUTY CYCLE (%) 80 Figure 14. SNR, SINAD vs. Clock Pulse-Width High, AIN = 70 MHz @ -1 dBFS, 250 MSPS, DCS On/Off 75 50.0 0 F1, F2 = -7dBFS 2F2-F1 = -65.9dBc 2F1-F2 = -64.9dBc SNR 47.5 SNR, SINAD (dB) -30 -40 -50 -60 70 SINAD 65 45.0 SFDR 60 42.5 05045-012 -70 -80 -90 0 20 40 60 (MHz) 80 100 Figure 12. Two-Tone Intermodulation Distortion (69.3 MHz and 70.3 MHz; fS = 250 MSPS) 40.0 0.5 120 SFDR (dBc) -20 55 0.7 0.9 1.1 1.3 1.5 1.7 EXTERNAL VREF VOLTAGE (V) 05045-015 -10 (dB) 05045-014 0 -70 42 05045-011 10 1.9 Figure 15. SNR, SINAD, and SFDR vs. VREF in External Reference Mode, AIN = 70 MHz @ -1 dBFS, 250 MSPS Rev. 0 | Page 13 of 28 AD9481 70 2.0 1.5 FS = 1V EXTERNAL REFERENCE 65 SFDR 0.5 60 (dB) GAIN ERROR (%) 1.0 0 55 -0.5 -1.0 FS = 1V INTERNAL REFERENCE 50 SINAD -20 0 20 40 TEMPERATURE (C) 60 45 3.0 80 Figure 16. Full-Scale Gain Error vs. Temperature, AIN = 70.3 MHz @ -0.5 dBFS, 250 MSPS 3.1 3.2 3.3 AVDD (V) SNR 3.4 3.5 05045-019 -2.0 -40 05045-016 -1.5 3.6 Figure 19. SNR, SINAD, and SFDR vs. Supply Voltage, AIN = 70.3 MHz @ -1 dBFS, 250 MSPS 70 0.5 0.4 65 0.3 SFDR 0.2 60 LSB (dB) 0.1 55 0 -0.1 50 -0.2 SINAD 05045-017 40 -40 -20 0 20 40 TEMPERATURE (C) 60 05045-020 -0.3 45 -0.4 -0.5 80 0 50 100 150 200 250 CODE Figure 17. SINAD, SFDR vs. Temperature, AIN = 70 MHz @ -1 dBFS, 250 MSPS Figure 20. Typical DNL Plot, AIN = 10.3 MHz @ -0.5 dBFS, 250 MSPS 0.10 0.50 0.05 0 LSB CHANGE IN VREF (%) 0.25 0 -0.05 -0.25 2.8 2.9 3.0 3.1 3.2 AVDD (V) 3.3 3.4 3.5 05045-021 -0.15 2.7 05045-018 -0.10 -0.50 3.6 0 50 100 150 200 CODE Figure 18. VREF Sensitivity to AVDD Figure 21. Typical INL Plot, AIN = 10.3 MHz @ -0.5 dBFS, 250 MSPS Rev. 0 | Page 14 of 28 250 AD9481 TPD_F 0.2 TCPD_F 0 -0.1 -0.2 TCPD_R -0.3 05045-048 DELAY CHANGE (ps) 0.1 TPD_R -0.4 -40 -20 0 20 40 TEMPERATURE (C) 60 80 Figure 22. Propagation Delay Sensitivity vs. Temperature Rev. 0 | Page 15 of 28 AD9481 EQUIVALENT CIRCUITS AVDD 16.7k 150 150 VIN- VIN+ 1.2pF 25k 1.2pF 30k 05045-023 25k PDWN 05045-026 16.7k AVDD Figure 26. Power-Down Input Figure 23. Analog Inputs AVDD DRVDD 12k 12k 150 150 10k 10k CLK+ 05045-027 CLK- 05045-024 Figure 27. Data, DCO Outputs Figure 24. Clock Inputs VDD 30k 05045-025 S1 Figure 25. S1 Input Rev. 0 | Page 16 of 28 AD9481 APPLICATIONS The AD9481 uses a 1.5 bit per stage architecture. The analog inputs drive an integrated high bandwidth track-and-hold circuit that samples the signal prior to quantization by the 8-bit core. For ease of use, the part includes an on-board reference and input logic that accepts TTL, CMOS, or LVPECL levels. The digital output logic levels are CMOS-compatible. 49.9 499 A wideband transformer, such as the Mini-Circuits ADT1-1WT, can provide the differential analog inputs for applications that require a single-ended-to-differential conversion. Note that the filter and center-tap capacitor on the secondary side is optional and dependent on application requirements. An RC filter at the secondary side helps reduce any wideband noise getting aliased by the ADC. AD8138 20pF AD9481 33 VIN- 523 AGND 499 05045-030 2k Figure 29. Driving the ADC with the AD8138 The AD9481 can be easily configured for different full-scale ranges. See the Voltage Reference section for more information. Optimal performance is achieved with a 1 V p-p analog input. SENSE = GND VIN+ 500mV 2.0V 2.0V VIN- DIGITALOUT = ALL 1s DIGITALOUT = ALL 0s 05045-031 The analog input to the AD9481 is a differential buffer. For best dynamic performance, impedances at VIN+ and VIN- should match. Optimal performance is obtained when the analog inputs are driven differentially. SNR and SINAD performance can degrade if the analog input is driven with a single-ended signal. The analog inputs self-bias to approximately 1.9 V; this common-mode voltage can be externally overdriven by approximately 300 mV if required. VIN+ 1.3k 0.1F ANALOG INPUTS AVDD 33 499 (R, C OPTIONAL) 33 AVDD VIN+ 49.9 10pF 33 Figure 30. Analog Input Full Scale AD9481 VOLTAGE REFERENCE VIN- 0.1F 05045-029 AGND Figure 28. Driving the ADC with an RF Transformer For dc-coupled applications, the AD8138/AD8139 or AD8351 can serve as a convenient ADC driver, depending on requirements. Figure 29 shows an example with the AD8138. The AD9481 PCB has an optional AD8351 on board, as shown in Figure 39 and Figure 40. The AD8351 typically yields better performance for frequencies greater than 30 MHz to 40 MHz. The AD9481's linearity and SFDR start to degrade at higher analog frequencies (see the Typical Performance Characteristics section). For higher frequency applications, the AD9480 with LVDS outputs and superior AC performance should be considered. A stable and accurate 1.0 V reference is built into the AD9481. Users can choose this internal reference or provide an external reference for greater accuracy and flexibility. Figure 32 shows the typical reference variation with temperature. Table 8 summarizes the available reference configurations. VIN+ VIN- ADC CORE VREF 10F + 0.1F 7k SELECT LOGIC SENSE 0.5V 05045-032 7k Figure 31. Internal Reference Equivalent Circuit Rev. 0 | Page 17 of 28 AD9481 Fixed Reference The internal reference can be configured for a differential span of 1 V p-p (see Figure 34). It is recommended to place a 0.1 F capacitor as close as possible to the VREF pin; a 10 F capacitor is also required (see the PCB layout for guidance). If the internal reference of the AD9481 is used to drive multiple converters to improve gain matching, the loading of the reference by the other converters must be considered. Figure 34 depicts how the internal reference voltage is affected by loading. VREF 10F 0.1F 05045-034 SENSE Figure 33. Internal Fixed Reference (1 V p-p) 0 1.0085 1.0075 VREF (V) 1.0070 1.0065 1.0060 1.0055 1.0050 -0.1 -0.2 -0.3 -0.4 05045-035 % CHANGE IN VREF VOLTAGE 1.0080 05045-033 1.0045 1.0040 1.0035 -40 -20 0 20 40 TEMPERATURE (C) 60 -0.5 0 80 0.5 1.0 1.5 IREF (mA) 2.0 2.5 3.0 Figure 34. Internal VREF vs. Load Current Figure 32. Typical Reference Variation with Temperature Table 8. Reference Configurations SENSE Voltage AVDD 0.5 V (Self-Biased) AGND to 0.2 V Resulting VREF N/A (external reference input) 0.5 x (1 + R1/R2) V 1.0 V Reference External Programmable Internal fixed Rev. 0 | Page 18 of 28 Differential Span 1 x external reference voltage 1 x VREF (0.75 V p-p to 1.5 V p-p) 1 V p-p AD9481 External Reference An external reference can be used for greater accuracy and temperature stability when required. The gain of the AD9481 can also be varied using this configuration. A voltage output DAC can be used to set VREF, providing for a means to digitally adjust the full-scale voltage. VREF can be externally set to voltages from 0.75 V to 1.5 V; optimum performance is typically obtained at VREF = 1 V. (See the Typical Performance Characteristics section.) The clock inputs are internally biased to 1.5 V (nominal) and support either differential or single-ended signals. For best dynamic performance, a differential signal is recommended. An MC100LVEL16 performs well in the circuit to drive the clock inputs (ac coupling is optional). If the clock buffer is greater than two inches from the ADC, a standard LVPECL termination may be required instead of the simple pull-down termination shown in Figure 37. VREF 0.1F PECL GATE 05045--036 SENSE CLK- 0.1F Figure 35. External Reference 510k 510k Programmable Reference The programmable reference can be used to set a differential input span anywhere between 0.75 V p-p and 1.5 V p-p by using an external resistor divider. The SENSE pin self-biases to 0.5 V, and the resulting VREF is equal to 0.5 x (1 + R1/R2). It is recommended to keep the sum of R1 + R2 10 k to limit VREF loading (for VREF = 1.5 V, set R1 equal to 7 k and R2 equal to 3.5 k). R1 SENSE R2 05045-037 0.1F Figure 37. Clocking the AD9481 DS INPUTS The data sync inputs (DS+, DS-) can be used in applications which require that a given sample appear at a specific output port (A or B) relative to a given external timing signal. The DS inputs can also be used to synchronize two or more ADCs in a system to maintain phasing between Ports A and B on separate ADCs (in effect, synchronizing multiple DCO outputs). VREF 10F AD9481 CLK+ AVDD 05045-028 MAY REQUIRE RC FILTER EXTERNAL REFERENCE OR DAC INPUT change dynamically, requiring a wait time of 5 s after a dynamic clock frequency increase before valid data is available. The clock duty cycle stabilizer can be disabled at Pin 28 (S1). Figure 36. Programmable Reference CLOCKING THE AD9481 Any high speed ADC is extremely sensitive to the quality of the sampling clock provided by the user. A track-and-hold circuit is essentially a mixer, and any noise, distortion, or timing jitter on the clock is combined with the desired signal at the A/D output. Considerable care has been taken in the design of the CLOCK input of the AD9481, and the user is advised to give commensurate thought to the clock source. The AD9481 has an internal clock duty cycle stabilization circuit that locks to the rising edge of CLOCK and optimizes timing internally for sample rates between 100 MSPS and 250 MSPS. This allows for a wide range of input duty cycles at the input without degrading performance. Jitter on the rising edge of the input is still of paramount concern and is not reduced by the internal stabilization circuit. The duty cycle control loop does not function for clock rates less than 70 MHz nominally. The loop has a time constant associated with it that needs to be considered in applications where the clock rate can The DS inputs are internally biased to 1.5 V (nominal) and support either differential or single-ended signals. When DS+ is held high (DS- low), the ADC data outputs and DCO outputs do not switch and are held static. Synchronization is accomplished by the assertion (falling edge) of DS+ within the timing constraints tSDS and tHDS, relative to a clock rising edge. (On initial synchronization, tHDS is not relevant.) If DS+ falls within the required setup time (tSDS) before a given clock rising edge N, the analog value at that point in time is digitized and available at Port A, eight cycles later in interleaved mode. The next sample, N + 1, is sampled by the next rising clock edge and available at Port B, eight cycles after that clock edge. Driving each ADC's DS inputs by the same sync signal accomplishes synchronization between multiple ADCs. In applications which require synchronization, one-shot synchronization is recommended. An easy way to accomplish synchronization is by a one-time sync at power-on reset. Rev. 0 | Page 19 of 28 AD9481 Table 9. S1 Voltage Levels INTERLEAVING TWO AD9481s S1 Voltage (0.9 x AVDD) AVDD (2/3 x AVDD) (0.1 x AVDD) (1/3 x AVDD) (0.1 x AVDD) AGND (0.1 x AVDD) Data Format Offset binary Offset binary Twos complement Twos complement Duty Cycle Stabilizer Disabled Enabled Enabled Disabled DIGITAL OUTPUTS The CMOS digital outputs are TTL-/CMOS-compatible for lower power consumption. The outputs are biased from a separate supply (DRVDD), allowing easy interface to external logic. The outputs are CMOS devices that swing from ground to DRVDD (with no dc load). It is recommended to minimize the capacitive load the ADC drives by keeping the output traces short (< 2 inch, for a total CLOAD < 5 pF). When operating in CMOS mode, it is also recommended to place low value series damping resistors on the data lines close to the ADC to reduce switching transient effects on performance. Table 10. Output Coding (FS = 1 V) Code 255 255 254 * * 129 128 127 * * 2 1 0 0 (VIN+) - (VIN-) > +0.512 V +0.512 V +0.508 V * * +0.004 V +0.0 V -0.004 V * * -0.504 V -0.508 V -0.512 V < -0.512 V Offset Binary 1111 1111 1111 1111 1111 1110 * * 1000 0001 1000 0000 0111 1111 * * 0000 0010 0000 0001 0000 0000 0000 0000 Twos Complement 0111 1111 0111 1111 0111 1110 * * 0000 0001 0000 0000 1111 1111 * * 1000 0010 1000 0001 1000 0000 1000 0000 Instrumentation applications may prefer to interleave (or pingpong) two AD9481s to achieve twice the sample rate, or 500 MSPS. In these applications, it is important to match the gain and offset of the two ADCs. Varying the reference voltage allows the gain of the ADCs to be adjusted; external dc offset compensation can be used to reduce offset mismatch between two ADCs. The sampling phase offset between the two ADCs is extremely important as well and requires very low skew between clock signals driving the ADCs (< 2 ps clock skew for a 100 MHz analog input frequency). DATA CLOCK OUT A data clock is available at DCO+ and DCO-. These clocks can facilitate latching off-chip, providing a low skew clocking solution. The on-chip delay of the DCO clocks tracks with the on-chip delay of the data bits, (under similar loading) such that the variation between tPD and tCPD is minimized. It is recommended to keep the trace lengths on the data and DCO pins matched and 2 inches maximum. A series damping resistor at the clock outputs is also recommended. The DCO outputs can be disabled and placed in a high impedance state by tying S3 to ground (tie to AVDD for DCO active). Switching both into and out of high impedance is accomplished in 4 ns from S3 switching. POWER-DOWN INPUT The ADC can be placed into a low power state by setting the PDWN pin to AVDD. Time to go into (or come out of) power down equals 30 ns typically from PDWN switching. Rev. 0 | Page 20 of 28 AD9481 AD9481 EVALUATION BOARD The AD9481 evaluation board offers an easy way to test the device. It requires a clock source, an analog input signal, and a 3.3 V power supply. The clock source is buffered on the board to provide the clocks for the ADC and a data-ready signal. The digital outputs and output clocks are available at an 80-pin output connector, P3, P23. (Note that P3, P23 are represented schematically as two 40-pin connectors, and this connector is implemented as one 80-pin connector on the PCB.) The board has several different modes of operation and is shipped in the following configuration: * Offset binary * Internal voltage reference ANALOG INPUTS The evaluation board accepts a 700 mV p-p analog input signal centered at ground at SMB Connector J3. This signal is terminated to ground through 50 by R22. The input can be alternatively terminated at the T1 transformer secondary by R21 and R28. T1 is a wideband RF transformer that provides the single-ended-to-differential conversion, allowing the ADC to be driven differentially, minimizing even-order harmonics. An optional transformer, T4, can be placed if desired (remove T1, as shown in Figure 39 and Figure 40). The analog signal can be low-pass filtered by R21, C8 and R28, C9 at the ADC input. GAIN POWER CONNECTOR Power is supplied to the board via two detachable 4-pin power strips. Table 11. Power Connector Full scale is set by the sense jumper. This jumper applies a bias to the SENSE pin to vary the full-scale range; the default position is SENSE = ground, setting the full scale to 1 V p-p. Terminal Comments OPTIONAL OPERATIONAL AMPLIFIER VDL (3.3 V) Output supply for external latches and data ready clock buffer ~ 30 mA AVDD1 3.3 V DRVDD1 3.3 V VCTRL1 3.3 V Op amp, ext. ref Analog supply for ADC ~ 140 mA Output supply for ADC ~ 30 mA Supply for support clock circuitry ~ 60 mA Optional supply for op amp and ADR510 reference The PCB has been designed to accommodate an optional AD8351 op amp that can serve as a convenient solution for dccoupled applications. To use the AD8351 op amp, remove R29, R31, and C3. Populate R12, R17, and R36 with 25 resistors, and populate C1, C21, C23, C31, C39, and C30 with 0.1 F capacitors. Populate R54, R10, and R11 with 10 resistors, and R34 and R32 with 1 k resistors. Populate R15 with a 1.2 k resistor and R14 with a 100 resistor. Populate R37 with a 10 k resistor. 1 AVDD, DRVDD, VDL, and VCTRL are the minimum required power connections. CLOCK The clock input is terminated to ground through 50 at SMA Connector J1. The input is ac-coupled to a high speed differential receiver (LVEL16) that provides the required low jitter, fast edge rates needed for best performance. J1 input should be > 0.5 V p-p. Power to the LVEL16 is set to VCTRL (default) or AVDD by jumper placement at the device. OPTIONAL CLOCK BUFFER The PCB has been designed to accommodate the SNLVDS1 line driver. The SNLVDS1 is used as a high speed LVDS-level optional encode clock. To use this clock, please remove C2, C5, and C6. Place 0.1 F capacitors on C34, C35, and C26. Place a 10 resistor on R48, and place a 100 resistor on R6. Place a 0 resistor on both R49 and R53. For best results using the line driver, J1 input should be > 2.5 V p-p. DS The DS inputs are available on the PCB at J2 and J4. If driving DS+ externally, place a 0 resistor at C48 and remove R53. Rev. 0 | Page 21 of 28 AD9481 OPTIONAL XTAL The PCB has been designed to accommodate an optional crystal oscillator that can serve as a convenient clock source. The footprint can accept both through-hole and surface-mount devices, including Vectron XO-400 and Vectron VCC6 family oscillators. To use either crystal, populate C38 and C40 with 0.1 F capacitors. Populate R48 and R49 with 0 resistors. Place R50, R51, R59, and R60 with 1 k resistors. Remove C6 and C5. If the Vectron VCC6 family crystal is being used, populate R57 with a 10 resistor. If using the XO-400 crystal, place jumper E21 or E22 to E23. VOLTAGE REFERENCE The AD9481 has an internal 1 V reference mode. The ADC uses the internal 1 V reference as the default when sense is set to ground. An optional on-board external 1.0 V reference (ADR510) can be used by setting the sense jumper to AVDD, by placing a jumper on E5 to E3, and by placing a 0 resistor on R55. When using an external programmable reference, (R20, R30) remove the sense jumper. OUT+ VCC OUT- DATA OUTPUTS VCC 05045-038 GND The ADC outputs are buffered on the PCB by LVT574 latches on the data outputs. The latch outputs have series terminating resistors at the output pins to minimize reflections. Figure 38. XTAL Footprint Rev. 0 | Page 22 of 28 AD9481 EVALUATION BOARD BILL OF MATERIALS (BOM) Table 12. No. 1 Quantity 24 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 1 5 4 3 3 2 7 8 7 2 2 2 2 2 1 3 1 3 2 4 2 1 1 1 1 1 1 1 1 11 18 33 16 1 Reference Designator C1 to C6, C10 to C12, C14 to C15, C17 to C19, C22 to C29, C31, C48 to C49 C13 C32 to C36 J1 to J4 P1, P12 to P13 P1, P12 to P13 P3, P23 R1, R5, R19, R22, R27, R35, R53 R2 to R4, R6 to R9, R18, R14 R13, R42 to R45, R32, R34 R16, R52 R23, R24 R25, R26 R29, R31 R33, R37 R46 R12, R17, R36 R15 R54, R10 to R11 RP1 to RP2 U3, U5 to U6, U8 U4, U7 T1 U1 U2 U101 U91 U12 U11 T21 C1, C7 to C9, C16, C20, C30, C31, C38 to C40 R20 to R21, R28, R30, R38 to R41, R48 to R51, R55 to R60 E98 to E102, E73 to E84 Device Capacitors Package 0402 Value 0.1 F Capacitor Capacitors SMA 4-pin power connectors 4-pin power connectors 80-pin connectors Resistors Resistors Resistors Resistors Resistors Resistors Resistors Resistors Resistor Resistors Resistor Resistors Resistor Pack Resistor Pack 100 74LVT574 Transformer AD8351 74VCX86 ADR510 VCC6PECL6 AD9481 MC100-LVEL16D ETC1-1-13 Capacitors Resistors Tantalum (3528) Tantalum (6032) SMA Post Detachable connector Connector 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 0603 100 Res. Array 100 Res. Array SO20 CD542 MSOP-10 SO-14 SOT-23 VCC6-QAB-250M000 TQFP-44 S08NB 1-1 TX 0402 0603 10 F 10 F Degrees Z5.531.3425.0 25.602.5453.0 TSW-140-08-L-D-RA 50 100 1 k 130 510 82 00 10 k 2 k 25 1.2 k 10 742C163100JTR EXB-38V101JV 74LVT574WM ADT1-1WT Op Amp XOR Voltage Regulator Vectron Crystal ADC Clock Buffer M/A-COM/ETC 1-1-13 X1 X1 Jumpers Not placed. Rev. 0 | Page 23 of 28 Rev. 0 | Page 24 of 28 Figure 39. PCB Schematic (1 of 2) CLK R27 50 R23 510 C2 0.1F VCTRL GND GND J1 AVDD GND 3 2 CM 8 C11 0.1F 100LVEL16 GND 5 6 GND R31 0 44 43 42 41 40 39 38 37 36 35 GND R26 Q- 82 R52 130 Q C5 0.1F U12 GND CM TIN1 DA3 DA4 DA5 DA6 DA7 DA0 DA1 DA2 DA3 E18 1 2 3 4 R3 100 DB3 DB2 DB1 E19 R2 DB0 100 DRVDD GND DA0 DA1 DA2 1 2 3 4 5 7 8 9 2 3 5 4 PRI SEC 1 6 T1- CM T1+ 10 11 VCTRL VDL DRVDD AVDD AVDD DRVDD DA4 DA5 DA6 DA7 8 7 6 5 8 7 6 5 8 7 6 5 8 7 6 5 E72 E7 E12 E4 E70 E71 GND GND COUT- C16 X U5 RPAK_4 1 2 3 4 U6 GND GND C20 X COUT+ GND U3 RPAK_4 1 2 3 4 100 RPAK_4 12 13 14 15 16 17 18 19 20 21 22 DB3 DB2 DB1 DB0 U8 1 2 3 4 6 AD9481 D3B D2B D1B D0B DRVDD DCO+ DCO- DRGND D0A D1A D2A DB7 DB6 DB5 DB4 DB7 DB6 DB5 DB4 100 RPAK_4 GND VREF AGND AVDD AGND VIN- VIN+ AGND AVDD S3 DS- DS+ OPTIONAL TRANSFORMER T2 ETC1-1-13 CLK- CLK+ 33 32 31 30 29 28 27 26 25 24 23 E25 X = NOT NORMALLY POPULATED XX = NOT POPULATED, USER SELECTED E8 C6 E6 0.1F OP AMP CONFIGURATION REMOVE C3 REMOVE R29 AND R31 VCTRL R25 82 GND AVDD GND AVDD GND 34 AMPOUT E29 C9 X GND R30 XX C12 0.1F GND R21 R29 X 0 R28 C10 X 0.1F R16 130 GND S3 AMPOUT E28 C8 X GND VCTRL T1+ CM + GND GND C13 10F T1- CM 3 PADS FOR SHORTING EL16, USED IF BYPASSING EL16 P14 P15 CLK Q P16 P17 CLKN Q- U11 CLKN Q VBB VEE C4 0.1F 4 2 6 T1-1T T1 TIN1 R VCC 7 CLK Q 1 E10 R24 4 510 E11 3 5 1 E26 E27 R55 X TRIM/NC E30 PRI SEC C3 0.1F AMPIN E9 R22 50 R53 50 GND GND C49 0.1F C48 R35 0.1F 50 GND GND GND J3 ANALOG INPUT GND J2 DS+ J4 DS- C14 0.1F V- V+ GND VDL GND DRVDD R1 50 GND 2 1 4 GND AVDD GND VCTRL VAMP 3 U10 ADR510 2 R33 E5 E3 10k P4 1 E16 E1 P3 4 E15 E2 P2 3 R20 XX P4 2 AVDD GND P1 1 GND VAMP GND AVDD AVDD PWDN S1 GND P3 4 AVDD GND DRVDD GND P2 3 SENSE AGND AVDD AVDD PWDN S1 DRGND D7B D6B D5B D4B P1 2 E14 P4 1 E13 P3 GND P1 P2 CLK+ CLK- AVDD AGND DRVDD DRGND D7A D6A D5A D4A D3A P12 P1 10 9 8 7 6 5 4 3 2 1 10 9 8 7 6 5 4 3 2 1 VCC OUT_EN Q0 D0 Q1 D1 Q2 D2 Q3 D3 Q4 D4 Q5 D5 Q6 D6 Q7 D7 GND CLOCK U7 74LVT574 VCC OUT_EN Q0 D0 Q1 D1 Q2 D2 Q3 D3 Q4 D4 Q5 D5 Q6 D6 Q7 D7 GND CLOCK U4 74LVT574 11 12 13 14 15 16 17 18 19 20 11 12 13 14 15 16 17 18 19 20 VDL VDL 8 7 6 5 4 3 2 1 8 7 6 5 4 3 2 1 R41 X DA0X DA1X DA2X DA3X DA4X DA5X DA6X DA7X GND R39 X R38 X VDL 9 10 11 12 13 14 15 16 P40 P38 P36 P34 P32 P30 P28 P26 P24 P22 P20 P18 P16 P14 P12 P10 P8 P6 P4 P2 39 37 35 33 31 29 27 25 23 21 19 17 15 13 11 9 7 5 3 1 P23 P39 P37 P35 P33 P31 P29 P27 P25 P23 P21 P19 P17 P15 P13 P11 P9 P7 P5 P3 P1 OUTPUT CONNECTOR 40 38 36 34 32 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 GND GND DR+ GND DB7X DB6X DB5X DB4X DB3X DB2X DB1X DB0X P40 P38 P36 P34 P32 P30 P28 P26 P24 P22 P20 P18 P16 P14 P12 P10 P8 P6 P4 P2 P3 P39 P37 P35 P33 P31 P29 P27 P25 P23 P21 P19 P17 P15 P13 P11 P9 P7 P5 P3 P1 39 37 35 33 31 29 27 25 23 21 19 17 15 13 11 9 7 5 3 1 OUTPUT CONNECTOR 40 38 36 34 32 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2 GND GND DR- GND DA7X DA6X DA5X DA4X DA3X DA2X DA1X DA0X NOTE: TWO 40 PIN OUTPUT CONNECTOR IMPLEMENTED AS ONE 80 PIN CONNECTOR GND CLKLAT- 100 RP2 DB7X DB6X DB5X DB4X DB3X DB2X DB1X DB0X R40 X VDL 9 10 11 12 13 14 15 16 CLKLAT+ 100 RP1 05045-040 P13 AD9481 PCB SCHEMATICS Figure 40. PCB Schematic (2 of 2) Rev. 0 | Page 25 of 28 E37 E38 E39 E36 GND C23 R11 X X R10 X R37 X R14 X U1 AD8351 GND R46 X R45 X R15 X RPG2 5 INLO 4 INHI 3 PWUP 1 RGP1 2 S1 13 12 10 9 5 4 2 1 VCTRL R7 COUT- E48 100 R6 COUT- E45 100 R8 COUT+ E51 100 VAMPF C21 X E34 E33 E32 E35 R12 X AMPIN GND R13 1k R43 1k R42 1k E47 E49 E46 E50 E52 E53 E55 E56 VCTRL GND VDL GND VDL GND VDL GND VDL R9 COUT+ E54 100 6 COMM 7 OPLO 9 VPOS 8 OPHI R32 X E88 GND VAMPF GND AVDD VAMPF GND GND R36 X R17 X R34 X C31 X E89 E90 S3 GND C30 X R56 X GND C39 X GND R44 1k PWDN DR- CLKAT- DR+ CLKLAT+ VDL E21 R5 50 R4 100 R19 50 R18 100 PWR E20 7 14 4Y 11 3Y 8 2Y 6 1Y 3 VCTRL 10 VOCM 4B 4A 3B 3A 2B 2A 1B 1A VAMP C7 X C36 + 10F AMPOUT AMPOUT R54 X VCTRL E23 E24 C15 0.1F C19 0.1F C25 0.1F C26 0.1F GND 7 14 VDL C24 0.1F C28 0.1F C17 0.1F C29 0.1F OUT VCC 6 PECL6 1 NC VC 2 E/D OUTPUTB 3 GND OUTPUT VEE -OUT VCC U13 XO-400 6 5 4 1 8 OPTIONAL XTALS R58 X C22 0.1F C18 0.1F C27 0.1F GND C40 X GND R57 X C38 X GND E22 GND C35 + 10F VCTRL GND C34 + 10F DRVDD GND C33 + 10F AVDD GND C32 + 10F VDL X = NOT NORMALLY POPULATED XX = NOT POPULATED, USER SELECTED VCTRL AVDD C1 X VAMPF VCTRL R50 XX R59 X VCTRL GND R51 XX R60 X GND R49 X R48 X CLK- CLK+ 05045-041 U2 74VCX86 AD9481 AD9481 PCB LAYERS Figure 41. PCB Top-Side Silkscreen 05045-044 05045-042 August 3, 2004 Figure 42. PCB Top-Side Copper Routing 05045-045 05045-043 Figure 43. PCB Ground Layer Figure 44. PCB Split Power Plane Rev. 0 | Page 26 of 28 05045-047 05045-046 AD9481 Figure 45. PCB Bottom-Side Copper Routing Figure 46. PCB Bottom-Side Silkscreen Rev. 0 | Page 27 of 28 AD9481 OUTLINE DIMENSIONS 1.20 MAX 0.75 0.60 0.45 12.00 SQ 34 44 1 33 PIN 1 TOP VIEW 10.00 SQ (PINS DOWN) 0 MIN 1.05 1.00 0.95 0.15 0.05 SEATING PLANE 0.20 0.09 VIEW A 7 3.5 0 0.08 MAX COPLANARITY 23 11 12 22 0.80 BSC VIEW A ROTATED 90 CCW 0.45 0.37 0.30 COMPLIANT TO JEDEC STANDARDS MS-026ACB Figure 47. 44-Lead Thin Plastic Quad Flat Package [TQFP] (SU-44)--Dimensions shown in millimeters ORDERING GUIDE Model AD9481BSUZ-2501 AD9481-PCB2 1 2 Temperature Range -40C to +85C Package Description 44-Lead Thin Plastic Quad Flat Package (TQFP) Evaluation Board Z = Pb-free part. Evaluation board shipped with AD9481BSUZ-250 installed. (c) 2004 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D05045-0-10/04(0) Rev. 0 | Page 28 of 28 Package Option SU-44