Time Delay and Impulse Relays
154
b
ALLIED See Our Manufacturer Index Located In Section 1
CUB-51
Time-Delay Relay
Stock Mfr.Õs
No. Type
886-0132 CUB-51-70120 75.14 71.17 66.42
EACH
50-9925-491-24
CB Series Relays
Knob-adjustable delay-on-operate time delay relays. DPDT contacts 10 A at 28 VDC resis., or 120 V, 60 Hz AC. 80%
power factor. Tolerance.: Adjust., Ð0, +20% of max. specified at high end; min. specified or less at low end. Release:
150 msec. Recycle: 150 msec. Transient Protection: Yes. Polarity protected. Operate room temperature. Timing intervals
adjust, over timing ranges 1 to 120 secs. 1.53 ´1.406 ´2.78" (3.87 ´3.57 ´7.07 mm) (including knob). 120 VAC.
3
1
/
2
oz.
Stock Mfr.Õs Delay
Voltage Pins
No. Type Seconds
EACH
50-9925-49
886-0107 CB-1042-B-30 24 AC 1.8-180 8 68.46 64.84 60.52
886-0108 CB-1001-B-70 120 AC 0.1-1 8 68.46 64.84 60.52
886-0109 CB-1002-B-70 120 AC 0.1-5 8 65.20 61.75 57.64
886-0110 CB-1003-B-70 120 AC 0.1-10 8 68.46 64.84 60.52
886-0005 CB-1004-B-70 120 AC 0.6-60 8 60.18 57.00 53.20
886-0111 CB-1005-B-70 120 AC 1.8-180 8 68.46 64.84 60.52
886-0112 CB-1006-B-70 120 AC 1.0-10 8 65.20 61.75 57.64
886-0113 CB-1007-B-70 120 AC 10.0-100 8 65.20 61.75 57.64
886-0104 CB-1047-D-20 12 DC 0.1-10 8 65.20 63.34 59.12
886-0115 CB-1028-D-30 24 DC 0.1-10 8 65.20 61.75 57.64
Delay-On-Release Relays
886-0119 CB-1046-B-38 24 AC 1.8-180 11 65.20 61.75 57.64
886-0126 CB-1021-B-78 120 AC 0.1-10 11 68.46 64.84 60.52
886-0121 CB-1022-B-78 120 AC 0.1-10 8 68.46 64.84 60.52
886-0122 CB-1023-B-78 120 AC 0.6-60 11 65.20 61.75 57.64
886-0123 CB-1024-B-78 120 AC 1.8-180 11 68.46 64.84 60.52
886-0124 CB-1038-D-38 24 DC 0.1-10 11 65.20 61.75 57.64
886-0125 CB-1039-D-38 24 DC 1.8-180 11 65.20 61.75 57.64
1-24
CL Series Time Delay Relays
Delay on operate. Similar to the CU Series except they don't have timing cycle interrupt transfer and will time to
0.1 second. DPDT rated at 10 amps. CL relays are enclosed in yellow polycarbonate dust covers. Plug-in/quick connect
terminals. Uses KU Series sockets. Available in fixed, resistor adjustable and knob adjustable. Weight: Approx. 3.5 oz.
External resistor not included.
Stock Mfr.Õs Time Input
No. Type Delay (Sec.) Voltage
EACH
50-9925-491-24
886-0021 CLB-51-70010 0.1-10 120 VAC 83.69 79.00 73.35
886-0022 CLB-51-70030 0.3-30 120 VAC 83.90 79.00 73.35
886-0023 CLB-51-70120 1.2-120 120 VAC 79.90 75.23 69.86
886-0024 CLF-41-70010* 0.1-10 120 VAC 75.33 70.93 65.86
886-0026 CLF-42-70010* 0.1-10 120 VAC 75.33 70.93 65.86
*External
1
/
4
watt minimum. Knob adjustable.
CB Series relays are economy, octal-type plug-in models with CMOS integrated circuits. Available in delay-on-operate,
delay-on-release or interval on timing modes, all units are knob-adjustable. Molded enclosure houses the timing circuit
and an internal relay. All models are DPDT, except type CB-1022B78 which is SPDT. Contacts rated 10 amps at 240 VAC,
6Hz. Power requirements typically less than 3 VA for AC types; 3 watts for DC types. Operating Temperature Range:
Ð10¡C to + 55¡C. Polarity protection. UL recognized, CSA certified.
Delay-On-Operate Relays
Series CH and CD
Time-Delay Devices and Relays
Solid-state devices. reset within milli-seconds. Adjustable over entire time range. Plastic
enclosures. Series CH. Temperature: Ð10¡C to +55¡C. Tolerance: Ð0, +20% of max.
specified @ high end; min. specified or less @ low end. Reset: 125 msec.
Repeatability: ±2%. Series CD. Temperature: Ð40¡C to +55¡C. Tolerance: ±5%.
Reset: 60 msec. Repeatability: ±1%. CHB/CDB38 time delays have internal DPDT
10 amp relay. CHB38-70011 and CHB38-70013 provide delay on release, others delay
on operate. Weight.: CD38 Ñ 9 oz. (255 gm); CH38 Ñ 6 oz. (168 gm).
Delay On Operate (Use 8-Pin Octal Sockets)
Stock Mfr.Õs Input Delay
No. Type Volts Sec.
EACH
50-9925-491-24
886-0090 CHB-38-70001 120 AC 1.0-10 78.37 74.23 69.28
886-0091 CHB-38-70003 120 AC 1.0-180 90.05 85.29 79.60
886-0085 CHD-38-30001 24 DC 1.0-10 90.05 85.29 79.60
886-0086 CHD-38-30003 24 DC 1.0-180 94.55 89.56 83.59
886-0053 CDB-38-70003 120 AC 0.1-10 150.83 142.86 133.33
886-0054 CDB-38-70004 120 AC 0.6-60 143.45 136.05 126.98
886-0055 CDB-38-70005 120 AC 1.8-180 143.65 136.05 126.98
Delay On Release (Use 11-Pin Sockets)
886-0082 CHB-38-70011 120 AC 1.0-10 94.55 89.56 83.59
886-0083 CHB-38-70013 120 AC 1.0-180 82.66 78.29 73.07
Impulse Relays
The S89R is a bistable, impulse relay that can affect a savings of
power in applications where the load is on for long periods of time.
Contact rating is 15 amps,
1
/
2
HP, 125/250 VAC amps, 125 VAC
tungsten filament lamp load;
1
/
2
amp, 125 VDC; and
1
/
4
amp,
250 VDC. Life expectancy at full load is 50,000 operations minimum;
100,000 operations, mechanical. Operating temperature range is
Ð10¡C to +60¡C. Mounting is by two #8-32 tapped holes on
1.844" (46.83 mm) centers. ÒACIÓ indicates 0.187" (4.75 mm) quick
connects. S90 relay is identical to the S89 Series except that
terminals are 0.250" (6.35 mm) quick connect and contacts are rated
at 20 amps. Coil for both series are rated for continuous duty
operation.
Stock Mfr.Õs Coil Contacts
No. Type Voltage
EACH
50-9925-491-24
886-1278 S89R5ABD1-24 24 VAC SPDT 24.49 23.07 21.42
886-1279 S89R5ABD1-120 120 VAC SPDT 23.11 21.77 20.21
886-1280 S89R5DBD1-12 12 VDC SPDT 23.21 21.84 20.28
886-1281 S89R11AAC1-24 24 VAC DPDT 29.55 27.82 25.84
886-1282 S89R11AAC1-120 120 VAC DPDT 29.55 27.82 25.84
886-1283 S89R11ABD1-24 24 VAC DPDT 27.88 26.25 24.38
886-1284 S89R11ABD1-120 120 VAC DPDT 29.55 23.64 21.96
886-1285 S89R11DAC1-12 12 VDC DPDT 28.13 26.49 24.59
886-1286 S89R11DAC1-24 24 VDC DPDT 31.24 25.00 23.21
886-1287 S89R11DBD1-12 12 VDC DPDT 28.14 24.40 22.52
886-1288 S89R11DBD1-24 24 VDC DPDT 26.55 23.02 21.25
886-1289 S90R5ABD1-120 120 VAC SPDT 26.34 24.81 23.04
886-1277 S90R11ABD1-24 24 VAC DPDT 31.92 30.05 27.91
886-1276 S90R11ABD1-120 120 VAC DPDT 31.92 30.05 27.91
3RP15 Series
Time Delay Relay
c
Available as SPDT or DPDT
c
15 Time Setting Ranges
c
0.05 Second-100 Hour Programmable Timing Range
c
Universal 24-240 VAC/VDC or Fixed Input Types
c
3 A Switching Current Rating
c
Fits 35 mm DIN Track
c
Single Function, Delay-On Available
c
Screw Termination Meeting IP20 Protection Category
c
UL, CSA, VDE, CE
c
LED Indicators for Power Applied and Contacts Closed
This programmable time delay relay is a multi-function device with
universal and fixed input voltages. Available in a slim, 22.5 mm
package that mounts directly to a 35 mm DIN track. This product is
designed with global applications in mind with approvals from UL, CSA,
VDC and CE. The 3RP15 replaces the CND series from Siemens
strengthening the time delay product offerings, complimenting the CNT
and CNS products. Rating: 3 A @ 250 VAC. Material: Silver tin oxide.
Switching Frequency: 2,500 operations/hour. Electrical Life: 200,000
operations min. at rated load. Temperature Range: Ð25¡C to +60 ¡C.
Multifunction
886-8702 3RP1505-1AQ30 24 24, 100-127 SPDT Fixed 101.71
886-8700 3RP1505-1AP30 24 24, 200-240 SPDT Fixed 63.00
886-8704 3RP1505-1BQ30 24 24, 100-127 DPDT Fixed 71.00
886-8706 3RP1505-1BW30 24-240 24-240 DPDT Universal 71.00
Delay On
886-8710 3RP1525-1AQ30 24 24, 100-127 SPDT Fixed 43.00
886-8708 3RP1525-1AP30 24 24, 200-240 SPDT Fixed 43.00
886-8712 3RP1525-1BQ30 24 24, 100-127 DPDT Fixed 47.00
886-8714 3RP1525-1BW30 24 24, 200-240 DPDT Fixed 47.00
Stock Mfr.Õs
No. Type
Input Voltage
ACDC
Contact
Arrangement
Input
Type EACH
4
Tyco/P&B