SURFACE MOUNT PIN GRID ARRAYS
For Interstitial Patterns
Female Socket
www.mill-max.com 516-922-6000
105
Series 513
SMT RECEPTACLE
TYPE 1385
FOR PGA MALE HEADER
1. Locate footprint pattern from pages 107 to 111, the middle 8 digits of
the part number will be located under the pattern.
Determined from footprint pattern pages 107 to 111
No. of pins Grid size Pattern #
Window
507 10 437
----
Series Plating
Code
Ordering Information
• Series 507 SMT Headers “float” in
a machined epoxy insulator.
• Series 513 Interstitial PGA
surface mount sockets are available
with and without tabs for clip-on
heatsinks.
•Mill-Max #43, “Ultra-Lite” contact
standard, see page 209 for
details.
•Hi-Temp PCT polyester insulator
material suitable for all forms of
soldering.
FOR PGA FEMALE SOCKET
1. Specify 2-digit plating code from chart at bottom of page.
2. Locate footprint pattern from pages 107 to 111, the middle 8 digits of
the part number will be located under the pattern.
Determined from footprint pattern pages 107 to 111
No. of pins Grid size Pattern #
Window
513 0 8 5
----
Series Plating
Code
HEADER PIN
TYPE 0737
SPECIFY PLATING CODE XX= 10
Pin Plating 10μ”Au
SPECIFY PLATING CODE XX= 13
91 93 99 41
43
44
Sleeve (Pin)
Contact (Clip)
10µ” Au 200µ” Sn/Pb 200µ” Sn/Pb 200µ”Sn/Pb 200µ”Sn 200µ”Sn 200µ”Sn
30µ” Au 10µ” Au 30µ” Au 200µ”Sn/Pb 10µ” Au 30µ” Au 200µ”Sn
2O(3
%#
