SPEC NO: DSAD6751 REV NO: V.4A DATE: MAY/15/2013 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1332000016
7.62mm (0.3 INCH) SINGLE COLOR DOT MA-
TRIX DISPLAY
Part Number: TA03-11SRT Super Bright Red
Features
z0.3 inch matrix height.
zLow current operation.
zStackable vertically and horizontally.
zEasy mounting on p.c. boards or sockets.
zMechanically rugged.
zRoHS compliant.
Description
The Super Bright Red source color devices are made with
Gallium Aluminum Arsenide Red Light Emitting Diode.
Package Dimensions& Intern al Circuit Diagram
Notes:
1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.
2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
SPEC NO: DSAD6751 REV NO: V.4A DATE: MAY/15/2013 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1332000016
Selection Guide
Note:
1. Luminous intensity/ luminous Flux: +/-15%.
* Luminous intensity value is traceable to the CIE127-2007 compliant national standards.
Absolute Maximum Ratings at TA=25° C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to the CIE127-2007 compliant national standards.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Part No. Dice Lens Type Iv (ucd) [1]
@ 10mA Description
Min. Typ.
TA03-11SRT Super Bright Red (GaAlAs) Red Transparent
14000 30000
*3600 *7500
Column Anode
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength Super Bright Red 655 nm IF=20mA
λD [1] Dominant Wavelength Super Bright Red 640 nm IF=20mA
Δλ1/2 Spectral Line Half-width Super Bright Red 20 nm IF=20mA
C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz
VF [2] Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA
IR Reverse Current Super Bright Red 10 uA VR=5V
Parameter Super Bright Red Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 155 mA
Reverse Voltage 5 V
Operating / Storage Temperature -40°C To +85°C
Lead Solder Temperature[2] 260°C For 3-5 Seconds
SPEC NO: DSAD6751 REV NO: V.4A DATE: MAY/15/2013 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1332000016
Super Bright Red TA03-11SRT
SPEC NO: DSAD6751 REV NO: V.4A DATE: MAY/15/2013 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1332000016
PACKING & LABEL SPECIFICATIONS TA03-11SRT
SPEC NO: DSAD6751 REV NO: V.4A DATE: MAY/15/2013 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1332000016
SPEC NO: DSAD6751 REV NO: V.4A DATE: MAY/15/2013 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Q.M.Chen ERP: 1332000016
Detailed application notes are listed on our website.
http://www.kingbright.com/application_notes
