PRODUCT DESCRIPTION
Electro-Wash MX Cleaner Degreaser is a
high flash point cleaner that quickly
removes soils, adhesives, and residues from
insulation jackets and conductors on
telecom, fiber optic and coaxial cables.
Engineered with very low surface tension,
this formulation penetrates and removes
soils quickly with excellent wetting action,
lifting and removing soils from the dirtiest
areas. Electro-Wash MX Cleaner
Degreaser is also ideal for removing
carbonization, oxidized oils and greases
from meta l surfaces.
Removes encrusted dirt, grease, silicone
and other contaminants
Removes flooding compound and
“ickypic”
Moderate evaporation
Leaves no residues
Low odor
Contains no CFCs or HCFCs
Contains no chlorinated solvents
TYPICAL APPLICATIONS
Electro-Wash MX Cleaner Degreaser is
engineered to clean:
Fiber Optics & Connectors
Cables
Hard-line Coax Cable
Metal & Fiber Optic Cable Splices
PC Boards
Motors & Transformers
Control Systems
Screens & Stenc ils
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Boiling Point
239° F Initial
Flash Point (TCC)
45° F
Evaporation Rate >1
(butyl acetate= 1)
Specific Gravity 0.72
Appearance Clea r, Colorle ss Liquid
Odor
Hydrocarbon
Kauri-Butanol
(KB) Numb er
29
Solubilit y in Water
Negligible
Shelflife
5 years
COMPATIBILITY
Electro-Wash MX Cleaner Degreaser is
generally compatible with most materials.
As with any cleaning agent,
solvent/component compatibility must be
determined on a non-critical area prior to
use.
TDS # CP421
CHEMTRONICS
Technical Data Sheet
Electro-Wash
MX Cleaner Degreaser
Presaturated Wipe
Material
Compatibility
ABS
Excellent
Buna-N
Excellent
EPDM
Excellent
Graphite
Excellent
HDPE
Excellent
Kynar
Excellent
LDPE
Excellent
Lexan
Excellent
Neoprene
Excellent
Noryl
Excellent
Nylon 66
Excellent
Cross-Linked PE
Excellent
Polypropylene
Excellent
Polystyrene
Excellent
PVC
Excellent
Silicone Rubber
Excellent
Teflon
Excellent
Viton
Excellent
USAGE INSTRUCTIONS
For commercial use only.
Read MSDS carefully prior to use.
Remove wipe from packets and lightly wipe
away any dust or contaminants from
surfaces. Allow surface to dry completely
before use.
AVAILABILITY
CP421 Pr esaturated Wipes (25/box)
Chemtronics and Electro-Wash are registered trademarks
of Chemtronics. All rights reserved.
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application
related questions. The toll free number is:
1-800-TECH-401.
ENVIRONMENTAL IMPACT DATA
ENVIRONMENTAL IMPACT DATA
CFC
VOC
100%
HCFC-141b
HCFC-225
HFC
nPB
0.0%
0.0%
CFC, HCFC-225, HCFC-141b, VOC, HFC, and
nPB percentages shown are the content by weight.
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy
of the data and assumes no liability in connection
with damages incurred while using it.
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888 REV. B (08/13)
DISTRIBUTED BY: