3.2±0.2
14
3
2
2.5±0.2 1.9±0.1
0.65
0.3
0.3
0.65
0.90.9
1.9
0.4
0.3 0.3
.50
2.5
±0.3
.045
1.37
A
3.2±0.3
This page of product is RoHS compliant.
14±0.4
21.25±0.4
7.06
±0.2
L
W
H
Inductors
2563
SMT Power Inductors, Filters and Transformers
DIMENSIONS: mm
A B
C D
mouser.com (800) 346-6873
© Copyright 2016 Mouser Electronics
© Copyright 2016 Mouser Electronics
WOUND SMD STEP-UP TRANSFORMERS
For quantities greater than listed, call for quote.
MOUSER
STOCK NO.
TDK
Part No. Fig. Turns
Ratio
DCR (Ω) Inductance (uH) @ 100kHz Rated
Current
A Dim.
(mm)
Price Each
Primary Secondary Primary Leakage 1 10 100 1000
810-ATB322515-0110 ATB322515-0110 C 1:10 0.4 Max. 60 Max. 7 Typ. 0.4 Max. 0.6A rms 1.55 Max. 2.08 1.67 1.29 .996
810-ATB322524-0110 ATB322524-0110 C 1:10:2 0.4 Max. 60 Max. 7 Typ. 0.4 Max. 0.7A rms 2.40 Max. 1.78 1.43 1.10 .854
Features:
• Small step-up transformers developed for Xenon circuits.
• ATB3225 is smaller than existing step-up transformer products
and enables a reduction of mounting surfaces.
• Achieves stable charging characteristics through an automatic
wire winding function that allows for stable winding.
• Realizes high reliability through process automation.
PQ SERIES SMT INDUCTIVE PLANAR TRANSFORMERS
For quantities greater than listed, call for quote.
MOUSER
STOCK NO.
Standex-Meder
Part No. Fig. Inductance
(µH))
Nom.
Amps
DCR
(mΩ) Nom.
Height
(mm)
Price Each
1 25 100 1000
Style PQ20
876-PQ2006-1R0-30-G PQ2006-1R0-30-G A 1.0 30 1.0 6 5.01 4.18 3.00 2.50
876-PQ2007-2R2-25-G PQ2007-2R2-25-G A 2.2 25 3.5 7 5.20 4.34 3.12 2.60
876-PQ2007-4R4-15-G PQ2007-4R4-15-G A 4.4 15 3.6 7 5.20 4.34 3.12 2.60
Style PQ26
876-PQ2613-1R0-80-G PQ2613-1R0-80-G A 1.0 80 1.2 13 5.78 4.73 3.57 3.05
Style PQ32
876-PQ3213-0R9-70-G PQ3213-0R9-70-G A 0.9 70 1.0 13 6.27 5.14 3.88 3.31
876-PQ3218-3R3-70-T PQ3218-3R3-70-T A 3.3 70 1.1 18 7.57 6.05 4.84 4.24
876-PQ3218-6R0-50-T PQ3218-6R0-50-T A 6.0 50 1.5 18 8.03 6.43 5.14 4.50
Features:
• Low prole
• Better power density and performance compared to equivalent wire wound transformer designs
• Inductance range of 0.4 to 6.0μH
• Maximum operating rated temperatures of -30ºC to +125ºC
COMMON MODE FILTERS FOR POWER SUPPLY LINES
For quantities greater than listed, call for quote.
MOUSER
STOCK NO.
TDK
Part No. Fig. Common Mode
Impedance (Ω) @ 100MHz
DCR Max.
(Ω)
Max. Rated
Current (A)
Rated
Voltage (V)
Insulation
Resistance (MΩ)
Price Each
1 10 100 1000
810-ACP32255012PT000 ACP3225-501-2P-T000 B 500±25% 0.04 2 60 10 1.19 1.19 .85 .477
810-ACP32251022PT000 ACP3225-102-2P-T000 B 1000±25% 0.10 1.5 60 10 1.19 .894 .85 .686
Features:
• A chip-type common mode lter for DC power supply lines.
• Low prole and compact shape, it is suited for surface mounting.
• Capable of achieving reduction in power consumption and improvement of noise
suppression effect, due to its Low DC resistance and high common mode impedance.
UNSHIELDED THRU-HOLE CHOKE COIL TRANSFORMERS
For quantities greater than listed, call for quote.
MOUSER
STOCK NO.
TDK
Part No. Fig. Turns
Ratio
Inductance
(µH)
Power Rating
(W)
Current
Rating (A)
Dimensions: mm Price Each
L W H 1 10 100 1000
810-PFC2723ER421K03B PFC2723ER-421K03B-00 D 10.8 420 100 3.4 25 28 25 21.68 20.75 14.03 10.84
810-PFC2723ER601K02B PFC2723ER-601K02B-00 D 9.8 600 75 2.4 25 28 25 21.68 20.75 14.03 10.84
810-PFC3125ER231K06B PFC3125ER-231K06B-00 D 9.0 230 200 6.4 26 33 27 21.68 20.75 14.03 10.84
810-PFC3125ER301K05B PFC3125ER-301K05B-00 D 4.9 300 150 4.9 26 33 27 21.68 20.75 14.03 10.84
810-PFC3125ER451K03E PFC3125ER-451K03E-00 D 10.0 450 100 2.7 26 33 27 21.68 20.75 14.03 10.84
810-PFC3525ER181K09B PFC3525ER-181K09B-00 D 10.5 180 250 9.5 27.5 37 27 21.68 20.75 14.03 10.84
810-PFC3525ER231K06E PFC3525ER-231K06E-00 D 5.6 225 200 5.6 27.5 37 27 21.68 20.75 14.03 10.84
810-PFC3525ER301K04E PFC3525ER-301K04E-00 D 10.4 300 150 4.1 27.5 37 27 21.68 20.75 14.03 10.84
Features:
• Frequency Range: 50kHz
• Operating Temperature Range: -30°C to +130°C