For more Information
please call
1-800-Belden1
General Description:
26 AWG stranded (30x40) high-conductivity BC conductors, polyethylene insulation, tinned copper "French
Braid" shield (95% coverage), BC drain wire, PVC jacket.
Physical Characteristics (Overall)
Conductor
AWG:
# Conductors AWG Stranding Conductor Material Dia. (in.)
426 30x40 SBC - Soft Bare Copper .021
Total Number of Conductors: 4
Insulation
Insulation Material:
Insulation Material Dia. (in.)
PE - Polyethylene .045
Outer Shield
Outer Shield Material:
Type Outer Shield Material Coverage (%)
French Braid TC - Tinned Copper 95
Outer Shield Drain Wire AWG:
AWG Stranding Drain Wire Conductor Material
28 Stranded BC - Bare Copper
Outer Jacket
Outer Jacket Material:
Outer Jacket Material
PVC - Polyvinyl Chloride
Overall Cable
Overall Cabling Color Code Chart:
Number Color
1Blue
2White
3Blue w/White Stripe
4White w/Blue Stripe
Overall Nominal Diameter: 0.190 in.
Mechanical Characteristics (Overall)
Operating Temperature Range: -20°C To +60°C
Non-UL Temperature Rating: 60°C
Bulk Cable Weight: 25 lbs/1000 ft.
Max. Recommended Pulling Tension: 37 lbs.
Min. Bend Radius/Minor Axis: 2 in.
Applicable Specifications and Agency Compliance (Overall)
Applicable Standards & Environmental Programs
EU Directive 2011/65/EU (ROHS II): Yes
EU CE Mark: No
EU Directive 2000/53/EC (ELV): Yes
EU Directive 2002/95/EC (RoHS): Yes
EU RoHS Compliance Date (mm/dd/yyyy): 01/01/2004
EU Directive 2002/96/EC (WEEE): Yes
EU Directive 2003/11/EC (BFR): Yes
Page 1 of 3 01-09-2015
Detailed Specifications & Technical Data
ENGLISH MEASUREMENT VERSION
1172A Multi-Conductor - Four-Conductor Star Quad, Low-Impedance Cable
CA Prop 65 (CJ for Wire & Cable): Yes
MII Order #39 (China RoHS): Yes
Plenum/Non-Plenum
Plenum (Y/N): No
Electrical Characteristics (Overall)
Nom. Characteristic Impedance:
Impedance (Ohm)
40
Nom. Inductance:
Inductance (µH/ft)
.21
Nom. Capacitance Conductor to Conductor:
Capacitance (pF/ft)
39.2
Nom. Cap. Between Cond. in a Quad Config.:
Capacitance (pF/ft)
57.4
Nominal Velocity of Propagation:
VP (%)
66
Nom. Conductor DC Resistance:
DCR @ 20°C (Ohm/1000 ft)
36
Nominal Outer Shield DC Resistance:
DCR @ 20°C (Ohm/1000 ft)
6.8
Max. Operating Voltage - UL:
Voltage
100 V RMS
Max. Recommended Current:
Current
1.9 Amps per conductor @ 25°C
Other Electrical Characteristic 1: 2/c 23 AWG equivalent DCR when connected to a 3-pin XLR
Notes (Overall)
Notes: Quad connection scheme: The two blue wires (or wires directly opposite one another) are connected together to form one conductor, and similarly the two white wires (or
remaining wires) are connected together to form the second conductor.
Put Ups and Colors:
Item # Putup Ship Weight Color Notes Item Desc
1172A B591000 1,000 FT 26.000 LB BLACK, MATTE C 4 #26 PE FBRD PVC
1172A B59500 500 FT 13.500 LB BLACK, MATTE 4 #26 PE FBRD PVC
1172A G7V1000 1,000 FT 26.000 LB RED, MATTE 4 #26 PE FBRD PVC
1172A G7W1000 1,000 FT 26.000 LB GREEN, MATTE 4 #26 PE FBRD PVC
1172A G7X1000 1,000 FT 26.000 LB BLUE, MATTE 4 #26 PE FBRD PVC
1172A G7Y1000 1,000 FT 26.000 LB WHITE, MATTE 4 #26 PE FBRD PVC
1172A G8M1000 1,000 FT 26.000 LB YELLOW, MATTE 4 #26 PE FBRD PVC
1172A U901000 1,000 FT 26.000 LB GRAY, MATTE 4 #26 PE FBRD PVC
Notes:
C = CRATE REEL PUT-UP.
Revision Number: 2 Revision Date: 10-04-2012
© 2015 Belden, Inc
All Rights Reserved.
Although Belden makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described herein are subject to error or omission and to
change without notice, and the listing of such information and specifications does not ensure product availability.
Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for
any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether
in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein.
All sales of Belden products are subject to Belden's standard terms and conditions of sale.
Belden believes this product to be in compliance with EU RoHS (Directive 2002/95/EC, 27-Jan-2003). Material manufactured prior to the compliance date may be in stock at Belden facilities
and in our Distributor’s inventory. The information provided in this Product Disclosure, and the identification of materials listed as reportable or restricted within the Product Disclosure, is
correct to the best of Belden’s knowledge, information, and belief at the date of its publication. The information provided in this Product Disclosure is designed only as a general guide for the
safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. This Product Disclosure is not to be considered a warranty or quality specification.
Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the
product.
Page 2 of 3 01-09-2015
Detailed Specifications & Technical Data
ENGLISH MEASUREMENT VERSION
1172A Multi-Conductor - Four-Conductor Star Quad, Low-Impedance Cable
product.
Page 3 of 3 01-09-2015
Detailed Specifications & Technical Data
ENGLISH MEASUREMENT VERSION
1172A Multi-Conductor - Four-Conductor Star Quad, Low-Impedance Cable
