STANDARD PLCC SOCKETS
For Through Board Mount
www.mill-max.com 516-922-6000
92
Series 940
Ordering Information
•Note: Not end stackable.
•Accepts JEDEC PLCCs
MS-016 & MS-018
leaded plastic substrates.
•Insulator material is
glass reinforced PPS.
•Standoffs provide clear-
ance for heat dissipation
and cleaning.
• Internal standoffs insure
proper positioning of chip
carrier in socket.
•Contacts are plated with
150µ” tin/lead.
• Pre-lubricated available.
20 0.613 0.200 0.400 38 940-99-020-24-00X
28 0.713 0.300 0.500 33 940-99-028-24-00X
32* .813/.713 .400/.300 .600/.500 29 *RECTANGULAR 940-99-032-24-00X
44 0.913 0.500 0.700 26 940-99-044-24-00X
52 1.013 0.600 0.800 23 940-99-052-24-00X
68 1.213 0.800 1.000 19 940-99-068-24-00X
84 1.413 1.000 1.200 16 940-99-084-24-00X
100 1.603 1.200 1.400 25 940-99-100-24-00X
X = 0 Not Lubricated
X = 1 Pre-Lubricated
No. of
Contacts
AB
C
X 490
490
!



"#
0#",!9/54
$)!(/,%
$)!
3/,$%20!$
Application of Pre-Lubricated Sockets:
Intended as a general-pupose lubricant for tin/lead
connectors, Nyetact 502M-20-UV is a solvent disper-
sion of a water-resistant, non-melting grease based on
a plastic-compatible, synthetic hydrocarbon oil. Useful
temperature range: -40° to 120°C. The active lubricant
is present at 20% (by weight) in mineral spirits.
The pre-lubrication increases the reliability of standard
sockets by preventing fretting corrosion.
Pre-lubricated sockets can be used for any long life
applications having a tin-tin interface.
There is no degradation of lubrication during soldering
or final wash. Contact the factory for other pre-lubricat-
ed products.
See page 96 for lubrication specifications.
Quantity
per Tube
DRAWING NUMBER
CUSTOMER APPROVAL
DATE
TITLE
DRAWN ENG. APPROVAL SHEET NUMBER
REV
MILL-MAX MFG. CORP.
®
P.O. BOX 300, 190 PINE HOLLOW ROAD, OYSTER BAY, NY 11771-0300
TEL: (516) 922-6000 FAX: (516) 922-9253 WEB: WWW.MILL-MAX.COM
PIN TOLERANCES
BEFORE PLATING
LENGTHS: ±.005
DIAMETERS: ±.002
ANGLES: ± 2°
INSULATOR
TOLERANCES
LENGTHS: ±.005
THICKNESS: ±.003
HOLE TO HOLE: ±.001
NON ACCUMULATIVE
ALL DIMENSIONS IN INCHES
REV. DATE REV. DESCRIPTION
THIS DRAWING CONTAINS INFORMATION PROPRIETARY TO MILL-MAX MFG. CORP.®
ANY REPRODUCTION, DISCLOSURE OR USE OF THIS DOCUMENT IS PROHIBITED
WITHOUT THE WRITTEN CONSENT OF MILL-MAX MFG. CORP.®
DRAWING NUMBER
CUSTOMER APPROVAL
DATE
TITLE
DRAWN ENG. APPROVAL SHEET NUMBER
REV
MILL-MAX MFG. CORP.
®
P.O. BOX 300, 190 PINE HOLLOW ROAD, OYSTER BAY, NY 11771-0300
TEL: (516) 922-6000 FAX: (516) 922-9253 WEB: WWW.MILL-MAX.COM
PIN TOLERANCES
BEFORE PLATING
LENGTHS: ±.005
DIAMETERS: ±.002
ANGLES: ± 2°
INSULATOR
TOLERANCES
LENGTHS: ±.005
THICKNESS: ±.003
HOLE TO HOLE: ±.001
NON ACCUMULATIVE
ALL DIMENSIONS IN INCHES
REV. DATE REV. DESCRIPTION
THIS DRAWING CONTAINS INFORMATION PROPRIETARY TO MILL-MAX MFG. CORP.®
ANY REPRODUCTION, DISCLOSURE OR USE OF THIS DOCUMENT IS PROHIBITED
WITHOUT THE WRITTEN CONSENT OF MILL-MAX MFG. CORP.®
DRAWING NUMBER
CUSTOMER APPROVAL
DATE
TITLE
DRAWN ENG. APPROVAL SHEET NUMBER
REV
MILL-MAX MFG. CORP.
®
P.O. BOX 300, 190 PINE HOLLOW ROAD, OYSTER BAY, NY 11771-0300
TEL: (516) 922-6000 FAX: (516) 922-9253 WEB: WWW.MILL-MAX.COM
PIN TOLERANCES
BEFORE PLATING
LENGTHS: ±.005
DIAMETERS: ±.002
ANGLES: ± 2°
INSULATOR
TOLERANCES
LENGTHS: ±.005
THICKNESS: ±.003
HOLE TO HOLE: ±.001
NON ACCUMULATIVE
ALL DIMENSIONS IN INCHES
REV. DATE REV. DESCRIPTION
THIS DRAWING CONTAINS INFORMATION PROPRIETARY TO MILL-MAX MFG. CORP.®
ANY REPRODUCTION, DISCLOSURE OR USE OF THIS DOCUMENT IS PROHIBITED
WITHOUT THE WRITTEN CONSENT OF MILL-MAX MFG. CORP.®
DRAWING NUMBER
CUSTOMER APPROVAL
DATE
TITLE
DRAWN ENG. APPROVAL SHEET NUMBER
REV
MILL-MAX MFG. CORP.
®
P.O. BOX 300, 190 PINE HOLLOW ROAD, OYSTER BAY, NY 11771-0300
TEL: (516) 922-6000 FAX: (516) 922-9253 WEB: WWW.MILL-MAX.COM
PIN TOLERANCES
BEFORE PLATING
LENGTHS: ±.005
DIAMETERS: ±.002
ANGLES: ± 2°
INSULATOR
TOLERANCES
LENGTHS: ±.005
THICKNESS: ±.003
HOLE TO HOLE: ±.001
NON ACCUMULATIVE
ALL DIMENSIONS IN INCHES
REV. DATE REV. DESCRIPTION
THIS DRAWING CONTAINS INFORMATION PROPRIETARY TO MILL-MAX MFG. CORP.®
ANY REPRODUCTION, DISCLOSURE OR USE OF THIS DOCUMENT IS PROHIBITED
WITHOUT THE WRITTEN CONSENT OF MILL-MAX MFG. CORP.®
DRAWING NUMBER
CUSTOMER APPROVAL
DATE
TITLE
DRAWN ENG. APPROVAL SHEET NUMBER
REV
MILL-MAX MFG. CORP.
®
P.O. BOX 300, 190 PINE HOLLOW ROAD, OYSTER BAY, NY 11771-0300
TEL: (516) 922-6000 FAX: (516) 922-9253 WEB: WWW.MILL-MAX.COM
PIN TOLERANCES
BEFORE PLATING
LENGTHS: ±.005
DIAMETERS: ±.002
ANGLES: ± 2°
INSULATOR
TOLERANCES
LENGTHS: ±.005
THICKNESS: ±.003
HOLE TO HOLE: ±.001
NON ACCUMULATIVE
ALL DIMENSIONS IN INCHES
REV. DATE REV. DESCRIPTION
THIS DRAWING CONTAINS INFORMATION PROPRIETARY TO MILL-MAX MFG. CORP.®
ANY REPRODUCTION, DISCLOSURE OR USE OF THIS DOCUMENT IS PROHIBITED
WITHOUT THE WRITTEN CONSENT OF MILL-MAX MFG. CORP.®
DRAWING NUMBER
CUSTOMER APPROVAL
DATE
TITLE
DRAWN ENG. APPROVAL SHEET NUMBER
REV
MILL-MAX MFG. CORP.
®
P.O. BOX 300, 190 PINE HOLLOW ROAD, OYSTER BAY, NY 11771-0300
TEL: (516) 922-6000 FAX: (516) 922-9253 WEB: WWW.MILL-MAX.COM
PIN TOLERANCES
BEFORE PLATING
LENGTHS: ±.005
DIAMETERS: ±.002
ANGLES: ± 2°
INSULATOR
TOLERANCES
LENGTHS: ±.005
THICKNESS: ±.003
HOLE TO HOLE: ±.001
NON ACCUMULATIVE
ALL DIMENSIONS IN INCHES
REV. DATE REV. DESCRIPTION
THIS DRAWING CONTAINS INFORMATION PROPRIETARY TO MILL-MAX MFG. CORP.®
ANY REPRODUCTION, DISCLOSURE OR USE OF THIS DOCUMENT IS PROHIBITED
WITHOUT THE WRITTEN CONSENT OF MILL-MAX MFG. CORP.®
DRAWING NUMBER
CUSTOMER APPROVAL
DATE
TITLE
DRAWN ENG. APPROVAL SHEET NUMBER
REV
MILL-MAX MFG. CORP.
®
P.O. BOX 300, 190 PINE HOLLOW ROAD, OYSTER BAY, NY 11771-0300
TEL: (516) 922-6000 FAX: (516) 922-9253 WEB: WWW.MILL-MAX.COM
PIN TOLERANCES
BEFORE PLATING
LENGTHS: ±.005
DIAMETERS: ±.002
ANGLES: ± 2°
INSULATOR
TOLERANCES
LENGTHS: ±.005
THICKNESS: ±.003
HOLE TO HOLE: ±.001
NON ACCUMULATIVE
ALL DIMENSIONS IN INCHES
REV. DATE REV. DESCRIPTION
THIS DRAWING CONTAINS INFORMATION PROPRIETARY TO MILL-MAX MFG. CORP.®
ANY REPRODUCTION, DISCLOSURE OR USE OF THIS DOCUMENT IS PROHIBITED
WITHOUT THE WRITTEN CONSENT OF MILL-MAX MFG. CORP.®
DRAWING NUMBER
CUSTOMER APPROVAL
DATE
TITLE
DRAWN ENG.APPROVAL SHEET NUMBER
REV
MILL-MAXMFG. CORP
.
®
P.O. BOX300, 190 PINEHOLLOWROAD, OYSTER BAY, NY11771-0300
TEL: (516) 922-6000 FAX: (516)922-9253WEB:WWW.MILL-MAX.COM
PIN TOLERANCES
BEFOREPLATING
LENGTHS:±.005
DIAMETERS:±.002
ANGLES: ±2°
INSULATOR
TOLERANCES
LENGTHS:±.005
THICKNESS: ±.003
HOLETOHOLE: ±.001
NONACCUMULATIVE
ALLDIMENSIONSIN INCHES
REV
.DATEREV
.DESCRIPTION
THISDRAWINGCONTAINS INFORMATIONPROPRIETARYTOMILL-MAXMFG.CORP.®
ANY REPRODUCTION,DISCLOSUREOR USE OF THIS DOCUMENT ISPROHIBITED
WITHOUT THE WRITTEN CONSENT OF MILL-MAXMFG.CORP
.®