CD43__90B POW-R-BLOKTM Dual SCR Isolated Module 90 Amperes / Up to 1800 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Description: Powerex Dual SCR Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. TM POW-R-BLOK has been tested and recognized by the Underwriters Laboratories. OUTLINE DRAWING A C F G H 3 B 45 67 2 1 T J K "U" THREAD "S" FASTON TAB L D M N 6 7 1 ~ + 2 - Features: Q P Electrically Isolated Heatsinking DBC Alumina (Al2O3) Insulator Copper Baseplate Low Thermal Impedance for Improved Current Capability UL Recognized (E78240) CD43__90B Dual SCR Isolated POW-R-BLOKTM Module 90 Amperes / Up to 1800 Volts 3 5 4 Benefits: CONNECTION DIAGRAM Ordering Information: CD43 Outline Dimensions Dimension Inches Millimeters A 3.66 93 B 0.79 20 C 3.15 80 D 1.18 30 F 0.61 15.5 G 0.79 20 H 0.79 20 J 0.16 4 K 0.22 5.7 L 0.59 15 M 1.10 28 N 0.31 8 P 0.94 24 Q 1.16 29.4 S 0.11 x .03 2.8 x 0.8 T 0.25 6.4 U M5 M5 Select the complete nine digit module part number from the table below. Example: CD431690B is a 1600Volt, 90 Ampere Dual SCR Isolated POW-R-BLOKTM Module Type CD43 Voltage Current Volts Amperes (x100) 08 12 14 16 18 90 Version No Additional Insulation Components Required Easy Installation No Clamping Components Required Reduce Engineering Time Applications: Bridge Circuits AC & DC Motor Drives Battery Supplies Power Supplies Large IGBT Circuit Front Ends Lighting Control Heat & Temperature Control Welders B Note: Dimensions are for reference only. Revision Date: 04/28/2009 CD43__90B Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOKTM Dual SCR Isolated Module 90 Amperes / Up to 1800 Volts Absolute Maximum Ratings Characteristics Conditions Symbol Units Repetitive Peak Forward and Reverse Blocking Voltage VDRM & VRRM up to 1800 V Non-Repetitive Peak Reverse Blocking Voltage (t < 5 msec) VRSM VRRM + 100 V 180 Conduction, TC=84C IT(RMS) 150 A RMS Forward Current Average Forward Current Peak One Cycle Surge Current, Non-Repetitive 2 I t for Fusing for One Cycle, 8.3 milliseconds 180 Conduction, TC=84C IT(AV) 95 A 60 Hz, 100% VRRM reapplied, Tj=125C ITSM 1570 A 60 Hz, No VRRM reapplied, Tj=125C ITSM 1870 A 60 Hz, No VRRM reapplied, Tj=25C ITSM 2100 A 50 Hz, 100% VRRM reapplied, Tj=125C ITSM 1500 A 50 Hz, No VRRM reapplied, Tj=125C ITSM 1785 A 50 Hz, No VRRM reapplied, Tj=25C ITSM 2000 A 8.3 ms, 100% VRRM reapplied, Tj=125C It 2 It 2 10,270 14,520 A sec 2 A sec It 2 18,300 A sec 2 It 11,250 A sec 2 It 15,910 A sec 2 It 20,000 A sec di/dt 150 A/s 8.3 ms, No VRRM reapplied, Tj=125C 8.3 ms, No VRRM reapplied, Tj=25C 10 ms, 100% VRRM reapplied, Tj=125C 10 ms, No VRRM reapplied, Tj=125C 10 ms, No VRRM reapplied, Tj=25C Maximum Rate-of-Rise of On-State Current, (Non-Repetitive) Operating Temperature Tj=125C Storage Temperature 2 2 2 TJ -40 to +125 C -40 to +125 C 25 3 44 5 95 in.-Lb. Nm in.-Lb. Nm g 3.35 oz. 3000 3500 V V Module Weight, Typical 50 - 60 Hz, 1 minute 50 - 60 Hz, 1 second 2 Tstg Max. Mounting Torque, M5 Mounting Screw on Terminals Max. Mounting Torque, Module to Heatsink V Isolation @ 25C Circuit to base, all terminals shorted together 2 Vrms Vrms Information presented is based upon manufacturers testing and projected capabilities. This information is subject to change without notice. The manufacturer makes no claim as to the suitability of use, reliability, capability, or future availability of this product. Revision Date: 04/28/2009 CD43__90B POW-R-BLOKTM Dual SCR Isolated Module 90 Amperes / Up to 1800 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Electrical Characteristics, TJ=25C unless otherwise specified Characteristics Symbol Test Conditions Repetitive Peak Forward Leakage Current IDRM Up to 1800V, TJ=125C 20 mA Repetitive Peak Reverse Leakage Current IRRM Up to 1800V, TJ=125C 20 mA V TM / VFM ITM / IFM =300A 1.65 V Threshold Voltage, Low-level Slope Resistance, Low-level V(TO)1 rT1 TJ = 125C, I = 16.7% x IT(AV) to IT(AV) 0.9 2.0 V m Minimum dV/dt dV/dt Tj=125C, Up to 800V Tj=125C, 1200 - 1800V 500 V/s 1000 V/s 40 - 100 Peak On-State Voltage Min. Max. Units Turn-Off Time (Typical) t off TJ = 25C (Typical) s Gate Trigger Current IGT Tj= 25C, VD=6V, Resistive Load 150 mA Gate Trigger Voltage VGT Tj= 25C, VD=6V, Resistive Load 3.0 Volts Non-Triggering Gate Voltage VGDM Tj=125C, VD=VDRM 0.25 Volts Non-Triggering Gate Current IGDM Tj=125C, VD=VDRM 6 mA Holding Current IH TJ = 25C 250 mA Latching Current IL TJ = 25C 600 mA Thermal Characteristics Characteristics Max. Units Thermal Resistance, Junction to Case DC Operation Symbol RJ-C Per Module, both conducting Per Junction, both conducting 0.14 0.28 C/W C/W Thermal Resistance, Case to Sink Lubricated RC-S Per Module 0.1 C/W Revision Date: 04/28/2009 CD43__90B POW-R-BLOKTM Dual SCR Isolated Module 90 Amperes / Up to 1800 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Maximum On-State Forward Voltage Drop Maximum Transient Thermal Impedance (Junction to Case) ( Tj = 125 C ) 0.30 4.00 0.25 Thermal Impedance - Rjc - C/W On-State Voltage - Vtm - Volts 3.50 3.00 2.50 2.00 1.50 1.00 0.50 0.00 10 100 0.20 0.15 0.10 0.05 0.00 0.001 1000 0.01 0.1 Instantaneous On-State Current - Itm - Amperes Maximum On-State Power Dissipation 100 (Sinusoidal Waveform) 140 125 120 100 60 30 15 80 120 180 120 90 Max. Case Temperature - Tcase - C Maximum Power Dissipation Per SCR - Watts 10 Maximum Allowable Case Temperature (Sinusoidal Waveform) 60 40 180 0 360 CONDUCTION ANGLE 20 0 115 180 0 110 360 CONDUCTION ANGLE 105 15 100 30 95 90 60 90 85 120 180 80 0 20 40 60 80 100 0 10 20 Average On-State Current - It(av) - Amperes 30 40 50 60 70 80 90 100 Average On-State Current - It(av) - Amperes Maximum On-State Power Dissipation Maximum Allowable Case Temperature (Rectangular Waveform) (Rectangular Waveform) 180 125 160 270 140 360 180 120 100 15 60 30 90 120 80 60 40 0 20 180 360 CONDUCTION ANGLE 0 Max. Case Temperature - Tcase - C Maximum Power Dissipation Per SCR - Watts 1 Time - t - Seconds 120 115 0 110 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Average On-State Current - It(av) - Amperes 360 100 95 90 30 85 60 90 120 80 180 15 75 0 180 CONDUCTION ANGLE 105 0 10 20 30 40 50 60 70 80 90 270 360 100 110 120 130 140 150 Average On-State Current - It(av) - Amperes Revision Date: 04/28/2009