Customer Information sheet DRAWING No.: M80-928XXXX SHEET 2 OF 2 | IF IN DOUBT - ASK | NOT TO SCALE THIRD ANGLE PROJECTION ALL DIMENSIONS IN mm ORDER CODE: be 2 00 x No, = SECTION A-A M80 - 928XXXX OF PITCHES 5 09 TOTAL No. OF WAYS MAX 03 - 07, I7, 22 = |.00 MAX al. 22 = SELECTIVE GOLD + TIN/LEAD o ! 42 = SELECTIVE GOLD + 100% TIN 3.98 MAX DU = 4.5040. 20 dq RECOMMENDED PCB LAYOUT 2.00 x No. OF WAYS + 4.10 MAX 4.00 TYP 2.00 TYP 3.00 TYP o|!Le 109 TYP SPECIF ICATONS: = i MATERIAL: MOULDING = POLYAMIDE 46 UL94V-0, BLACK CONTACTS = PHOSPHOR BRONZE LATCHES = BERYLLIUM COPPER FINISH: CONTACTS: 22 = 0.75y GOLD ON CONTACT AREA, 2.00 TYP 0.50 TYP 3p 90/10 TIN/LEAD ON TAILS, OVER |.27p NICKEL RA | 2 905.07 al 10857 45 = 0.75y GOLD 42 = 0. 154 GOLD ON CONTACT AREA. 1 KE NAMEPISS. DATE C/NOTE Op 100% TIN ON TAILS OV 1.27p NICKEL . LATCH = 1.25p NICKEL APPROVED: R._ADDE ELECTRICAL: . CURRENT RATING (25C) = 3.0A MAX. MECHANICAL: CHECKED: M.G_PLESTED CURRENT RATING (85C) = 2.2A MAX. DURABILITY = 500 OPERATIONS DRAWN: R.ADDE WORKING VOLTAGE = 120V AC/DC ENVIRONMENTAL: CUSTOMER REF. VOLTAGE PROOF = 360V AC/DC TEMPERATURE RANGE = -55C TO #125C _ CONTACT RESISTANCE (INITIAL) = 20 mQ) MAX, PACKING: CONTACT RESISTANCE (AFTER CONDITIONING) = 25 mQ) MAX. TUBE INSULATION RESISTANCE CINITIAL) = 1000 MQ) MIN. FOR COMPLETE SPECIFICATION, SEE COMPONENT ASSEMBLY DRG: INSULATION RESISTANCE (AFTER CONDITIONING) = 100 MQQ MIN. SPECIFICIATION COO5XX (LATEST ISSUE) FAR WIN gear | ee [ue TIMES DATAMATE SIL VERTICAL COMF IDENT aL A COPTRGHT xX FE sm SEE ABOVE SMT PLUG ASSEMBLY cagin usa [uawin curope cue] wanvin Asie | cement tartatny | Sia 2: y0mm urope sid : . . = Uimmn . . ra: 43 23 SusTrae 93 45) hoa 08 6 ta Sua] ameeigawe | acucs = as OR SE MOE te AX: AX: 1 4 AX: + OTHER PURPOSE WITHOUT - mis@harwin.com mis@harwin.co.uk | mis@harwin. com. sq THEIR WRITTEN BERMISSION. UNLESS STATED | S/AREA: mm 2 M80 92EXXXX OF,