Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2013. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products. Please note that TAIYO YUDEN CO., LTD. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual specification. Please contact TAIYO YUDEN CO., LTD. for further details of product specifications as the individual specification is available. Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact TAIYO YUDEN CO., LTD. for more detail in advance. Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called TAIYO YUDEN s official sales channel ). It is only applicable to the products purchased from any of TAIYO YUDEN s official sales channel. Please note that TAIYO YUDEN CO., LTD. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. TAIYO YUDEN CO., LTD. grants no license for such rights. Caution for export Certain items in this catalog may require specific procedures for export according to Foreign Exchange and Foreign Trade Control Law of Japan, U.S. Export Administration Regulations , and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff. 14 SAW/FBAR DEVICES for MOBILE COMMUNICATIONS REFLOW ORDERING CODE APrevious Rule (applied to products registered on March 31, 2010 or before.) F A R - D 6 N F - 1 G 9 6 0 0 - P 1 B Z - Z Family Common sign - Fixation Package type Frequency Product type Series Product Frequency Range D5 Duplexer 700-1000MHz D6 Duplexer 1000-5000MHz J5 Dual Duplexer 700-1000MHz F5 Device 700-1000MHz F6 Device 1000-5000MHz G5 Dual Devices 700-1000MHz G6 Dual Devices 1000-5000MHz Common sign - Fixation Common sign - Fixation Serial Number Design Custom, Status Packing HIGH FREQUENCY PRODUCTS B New Rule (applied to products registered on April 1, 2010 or later.) D 6 N F 1 G 9 6 0 P 1 B Z - Z Series Product Frequency Range D5 Duplexer 700-1000MHz D6 Duplexer 1000-5000MHz J5 Dual Duplexer 700-1000MHz F5 Device 700-1000MHz F6 Device 1000-5000MHz G5 Dual Devices 700-1000MHz G6 Dual Devices 1000-5000MHz Package type Frequency Design Serial Number Product type Packing Custom For further details, please contact to TAIYO YUDEN Co.,Ltd. EXTERNAL DIMENSIONS/STANDARD QUANTITY 2.5x2.0x0.6 8pin 2.5x2.0x0.6 9pin 0.6max 2.50.1 2.5x2.0x0.65 0.6max 2.50.1 2.00.1 2.00.1 index index 4-0.9625 2-0.3 0.9x0.375 4-0.7375 Unitmm 1.4x1.0x0.5 1.400.1 Unitmm 1.000.1 0.50 1.400.1 index 1.41 0.40 0.5 Unitmm 0.25 0.25 0.575 0.25 1.00 0.25 Unitmm 0.39 0.60 0.25 0.25 0.25 0.2 1.17 0.47 0.60 0.325 1.100.1 index 0.40 0.5max 1.500.1 0.5max 0.20 0.325 1.5x1.1x0.5 0.5max 0.900.1 0.25 Unitmm 8-0.30 1.8x1.4x0.5 index 0.50 Unitmm 8-0.425 1.800.1 1.100.1 index C0.15 8-0.30 1.1x0.9x0.5 0.5max 0.60x0.30 4-0.575 8-0.375 8-0.425 2-0.325 C0.15 8-0.375 8-0.425 4-0.775 0.9x0.375 4-0.7375 C0.15 8-0.375 1.60.1 index 4-0.9625 2-0.3 C0.15 4-0.7375 0.5max 2.00.1 2.00.1 index 4-0.9625 2.0x1.6x0.5 0.65max 2.50.1 0.24 0.23 0.39 0.78 0.25 0.49 0.18 0.18 Unitmm 0.18 0.21 0.21 Unitmm This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 14 133 PART NUMBERS Duplexers System W-CDMA Band 1 PCS/W-CDMA Band 2 W-CDMA Band 4 CDMA/W-CDMA Band 5 HIGH FREQUENCY PRODUCTS W-CDMA Band 8 LTE Band 13 LTE Band 17 CDMA BC0+BC10 Part number FAR-D6JG-2G1400-D3FZ FAR-D6JH-2G1400-B1BT D6PE2G140P3AW FAR-D6NH-1G9600-M1Z9 FAR-D6NH-1G9600-M1Z6 D6PF1G960M3B6 FAR-D6NF-1G9600-P1BT D6NF1G960P1BR D6HH1G960BH95 D6PE1G960P3BY FAR-D6JH-2G1325-B1YZ D6JG2G132D3GZ D6PE2G132P3DWB FAR-D5NG-881M50-M11Z FAR-D5PF-881M50-M3E7 FAR-D5PF-881M50-M3E9 FAR-D5NE-881M50-P1A9 FAR-D5NE-881M50-P1A6Q FAR-D5PE-881M50-P3EZ FAR-D5PE-881M50-P3EY D5NL881M5P1HY FAR-D5NH-942M50-M1Y9 FAR-D5NF-942M50-P1GWQ D5PF942M5M3G9 D5PE942M5P3GT D5NL782M0P1JZ FAR-D5NE-740M0-P1C9 D5PE740M0P3NZ D5NF878M0P1ET D5PE878M0P3UT Package Size mm 2.5x2.0x0.65 2.5x2.0x0.65 2.0x1.6x0.5 2.5x2.0x0.65 2.5x2.0x0.65 2.0x1.6x0.57 2.5x2.0x0.65 2.5x2.0x0.65 2.5x2.0x0.65 2.0x1.6x0.57 2.5x2.0x0.65 2.5x2.0x0.65 2.0x1.6x0.5 2.5x2.0x0.6 2.0x1.6x0.5 2.0x1.6x0.5 2.5x2.0x0.6 2.5x2.0x0.6 2.0x1.6x0.5 2.0x1.6x0.5 3.0x2.5x0.7 2.5x2.0x0.65 2.5x2.0x0.65 2.0x1.6x0.5 2.0x1.6x0.5 3.0x2.5x0.7 2.5x2.0x0.6 2.0x1.6x0.5 2.5x2.0x0.65 2.0x1.6x0.5 Insertion Loss dB 1.4/1.7 1.4/1.7 1.5/1.6 2.2/3.1 2.3/2.7 2.2/2.7 2.5/2.8 2.5/3.4 2.3/2.5 2.0/3.1 1.5/1.7 1.6/1.9 1.8/1.8 1.45/1.8 1.5/1.8 1.5/1.8 1.6/1.8 1.6/1.7 1.4/1.7 1.4/1.7 1.6/2.6 1.8/2.3 1.9/2.3 1.9/2.2 1.7/2.2 1.9/2.2 1.7/2.0 1.9/2.0 1.9/2.5 1.9/2.2 IsolationdB Remarks 54/47 58/48 59/47 55/50 55/53 55/52 54/55 58/53 56/53 57/53 57/51 53/52 55/50 66/52 58/51 58/51 57/51 60/53 59/52 59/52 60/51 58/50 59/54 60/52 58/54 66/52 61/58 63/60 58/50 59/51 9 Pin, B Type 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type 9 Pin, B Type Low Rx IL 9 Pin, B Type 9 Pin, B Type 100ohm, Low Rx IL 9 Pin, B Type Rx : Bal.100ohm High GPS Att. & Rx Isol. 9 Pin, B Type 100ohm 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type 9 Pin, A Type 9 Pin, B Type 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type 100ohm 9 Pin, B Type Rx : Bal.100ohm 9 Pin, A Type Rx : Bal.100ohm SV-LTE 9 Pin, B Type 9 Pin, B Type 100ohm, GPS High Att. 9 Pin, B Type 9 Pin, B Type Rx : Bal.100ohm SV-LTE 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type Rx : Bal.100ohm 9 Pin, B Type Rx : Bal.100ohm Package Size mm 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.1x0.9x0.5 Insertion Loss dB 1.7 1.6 1.9 1.9 1.5 1.5 1.4 1.5 1.5 1.7 1.6 1.7 1.3 AttenuationdB Remarks 44 42 45 44 61 61 64 60 56 56 46 53 63 100ohm input 200ohm input High Att. High Att. 100ohm output 100ohm, High Att. 200ohm output 100ohm output 100ohm, High Att., Low Loss High Att. 150ohm output 150ohm output Package Size mm 1.4x1.0x0.5 1.4x1.0x0.5 Insertion Loss dB 2.3 2.1 AttenuationdB Remarks 43 53 High Att. 100ohm output Package Size mm 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.1x0.9x0.5 Insertion Loss dB 2.2 2.6 2.3 2.4 2.0 2.0 1.6 1.6 1.9 2.2 AttenuationdB Remarks 16 38 18 29 57 34 26 28 53 56 High Att. High Att. - 100ohm output 100ohm output, High Att. High Att. 150ohm output 150ohm output High Att. 100ohm output, High Att. Package Size mm 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.1x0.9x0.5 Insertion Loss dB 2.5 2.1 1.5 1.8 1.6 AttenuationdB Remarks 30 20 14 15 17 150ohm output 100ohm 150ohm CDMA/GSM850/Band 5 System CDMA Tx CDMA/GSM850 Tx CDMA/W-CDMA Band 5 Rx GSM850/CDMA Rx GSM850 Rx Part number FAR-F5KB-836M50-B4ER FAR-F5KB-836M50-B4EG F5QA836M5M2AR FAR-F5KA-836M50-D4DF FAR-F5KB-881M50-B4ED FAR-F5KY-881M50-B4UZ FAR-F5KB-881M50-B4EJ FAR-F5QB-881M50-P2BG F5QG881M5P2KG FAR-F5KA-881M50-D4DB FAR-F5QA-881M50-M2AF FAR-F5KB-881M50-B4EA FAR-F5QB-881M50-P2BA CDMA2000 BC0+BC10 System Part number CDMA2000 BC0+10 Tx CDMA2000 BC0+10 Rx F5KA833M0D4DU F5KY878M0B4ND GSM/EGSM/Band 8 System EGSM Tx EGSM Rx Part number FAR-F5KA-897M50-D4DC FAR-F5KA-897M50-D4VW F5QA879M5M2AC FAR-F5KB-942M50-B4ES FAR-F5KY-942M50-B4UW FAR-F5KA-942M50-D4DD FAR-F5KB-942M50-B4EB FAR-F5QB-942M50-P2BB F5KA942M5D4MYB F5QG942M5P2KB DCS/Band 3 System Part number DCS Tx FAR-F6KA-1G7475-D4CY FAR-F6KA-1G8425-D4CK FAR-F6KB-1G8425-B4GA F6QB1G842P2BM F6QB1G842P2BF DCS Rx This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 134 14 PART NUMBERS PCS/GSM1900/Band 2 Package Size mm 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 Insertion Loss dB 2.4 2.3 1.7 3.4 3.4 2.1 2.9 2.8 2.0 1.6 AttenuationdB Remarks 35 28 20 44 43 23 49 50 18 18 High Att. 100ohm input Package Size mm 1.8x1.4x0.5 1.8x1.4x0.5 1.5x1.1x0.5 Insertion Loss dB 1.8/1.6 1.6/1.8 1.5/1.8 AttenuationdB Remarks FAR-G6KZ-1G8425-Y4WZ FAR-G6KZ-1G8425-Y4WY FAR-G5QC-942M50-N2FB 31/16 16/31 50/29 EGSM 150ohm output DCS 150ohm output DCS 150ohm output EGSM 150ohm output GSM850 150ohm output EGSM 150ohm output FAR-G5KT-942M50-Y4RW 1.8x1.4x0.5 1.9/2.2 50/25 GSM850 150ohm output EGSM 150ohm output FAR-G5KW-942M50-Y4YD 1.8x1.4x0.5 2.5/1.8 32/38 EGSM 150ohm output GSM850 150ohm output FAR-G5KC-942M50-Y4YW FAR-G5QC-942M50-N2CD FAR-G5KT-942M50-Y4RZ FAR-G5QD-942M50-N2DB FAR-G6QC-1G9600-N2FA G6QJ1G960M2MB 1.8x1.4x0.5 1.5x1.1x0.5 1.8x1.4x0.5 1.5x1.1x0.5 1.5x1.1x0.5 1.5x1.1x0.5 1.8/1.4 1.7/1.4 2.2/1.9 2.5/2.0 1.9/1.7 1.9/1.9 31/54 29/51 25/52 25/55 17/13 19/19 EGSM 150ohm output GSM850 150ohm output EGSM 150ohm output GSM850 150ohm output EGSM 150ohm output GSM850 150ohm output EGSM 150ohm output GSM850 150ohm output DCS 150ohm output GSM1900 150ohm output Rx Dual Unbal G6QD1G960N2DY 1.5x1.1x0.5 1.8/1.9 18/14 1 IN 4 OUT 150ohm output G6QC1G960N2CH 1.5x1.1x0.5 1.6/1.2 13/15 GSM1900 150ohm output DCS 150ohm output FAR-G6KT-1G9600-Y4RY 1.8x1.4x0.5 1.9/1.8 13/18 GSM1900 150ohm output DCS 150ohm output FAR-G6KW-1G9600-Y4YC G6QE1G960N2EC G6QE1G960N2EE G6QF1G960N2GA 1.8x1.4x0.5 1.5x1.1x0.5 1.5x1.1x0.5 1.5x1.1x0.5 2.2/3.1 2.5/2.5 2.2/2.2 1.6/1.4 13/15 18/13 31/14 14/54 GSM1900 170ohm output DCS 170ohm output GSM1900 150ohm output DCS 150ohm output GSM1900/DCS 150ohm output Low Loss GSM1900 150ohm output GSM850 150ohm output AttenuationdB Remarks - - - - - - - - - - - - Low loss Low loss, High Att. Ultra Low loss Low loss High Att. Low loss, High Att. 100ohm output, Low loss 100ohm output, High Att. - - 100ohm output 100ohm output System Part number US-PCS Tx FAR-F6KA-1G8800-L4AF FAR-F6KB-1G8800-B4GS F6QA1G880M2AQ US-PCS Rx FAR-F6KA-1G9600-D4MT FAR-F6KB-1G9600-B4GP FAR-F6KY-1G9600-B4UU F6KY1G960B4NF FAR-F6KA-1G9600-D4CR FAR-F6KB-1G9600-B4GB US-PCS Rx GSM1900/US-PCS Rx GSM1900 Rx High Att. High Att. 100ohm output 100ohm, High Att. 100ohm output 150ohm output GSM Dual System EGSMDCS Rx DCSEGSM Rx GSM850EGSM Rx GSM850EGSM Rx Common Input GSM850+EGSM Rx (Common Output) EGSMGSM850 Rx Common Input DCSGSM1900 Rx DCS+GSM1900 Rx (Common Input) GSM1900DCS Rx GSM1900DCS Rx Common Input GSM1900DCS Rx Common Output GSM1900850 Rx GPS System GPS GPS/GNSS Part number FAR-F6KA-1G5754-L4AA FAR-F6KA-1G5754-L4AJ FAR-F6KA-1G5754-L4AB FAR-F6QA-1G5754-H2JD FAR-F6QA-1G5754-H2JE F6QA1G575H2JF FAR-F6KB-1G5754-B4GE FAR-F6KB-1G5754-B4GU FAR-F6KA-1G5859-D4MS F6QA1G585M2AT FAR-F6KB-1G5859-B4HR F6QB1G585P2BQ Package Size mm 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.1x0.9x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.1x0.9x0.5 Insertion Loss dB 0.9 0.9 0.44 0.87 1.27 0.96 1.1 1.2 1.0/1.2 1.1/1.4 1.1/1.4 1.5/1.7 HIGH FREQUENCY PRODUCTS EGSMGSM850 Rx Part number This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 14 135 PART NUMBERS W-CDMA W-CDMA Band 1+2 Rx W-CDMA Band 2+1 Rx W-CDMA Band 1+5 Rx FAR-F6KA-1G9500-D4DG F6QA1G950M2AA FAR-F6KA-2G1400-D4CG FAR-F6KA-2G1400-D4DW FAR-F6KY-2G1400-B4UY F6QG2G140P2KA G6QL2G140M2PA G6QH2G140N2LP FAR-G6KG-2G1400-Y4SH Package Size mm 1.4x1.0x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.5x1.1x0.5 1.5x1.1x0.5 1.8x1.4x0.5 W-CDMA Band 4 Tx FAR-F6KA-1G7400-D4DE 1.4x1.0x0.5 1.5 44 G5QH942M5N2LN 1.5x1.1x0.5 1.6/20 56/50 100ohm output G5QT942M5N2VA 1.5x1.1x0.5 2.3/2.0 48/48 100ohm output F6KA2G535L4AM FAR-F6KY-2G6550-B4UN F6QG2G655P2KE F5KA707M5D4JW F5KY737M0B4NN FAR-F5KA-782M00-D4VP FAR-F5KY-751M00-B4UQ FAR-F5KA-710M00-D4VQ FAR-F5KY-740M00-B4UR F5QG740M0P2KH F5KA832M0D4JS F5KA847M0D4ML F5KY806M0B4NE F6KY1G503B4NS F6QA1G882M2AS F6KB2G595B4HS 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.1x0.9x0.5 1.4x1.0x0.5 1.6 2.8 2.5 1.6 1.4 1.5 1.6 1.2 1.4 1.4 1.5 1.7 2.5 1.4 1.8 2.6 30 54 52 23 57 55 50 32 60 65 19 52 45 47 23 - G6QE2G595N2EJ 1.5x1.1x0.5 2.9/2.8 - Balanced 100ohm F6KB2G350B4HT F6KB2G350B4HTB 1.4x1.0x0.5 1.4x1.0x0.5 2.7 2.5 - - 150ohm output Balanced 100ohm AttenuationdB Remarks System W-CDMA Band 1 Tx W-CDMA Band 5+8 Rx W-CDMA Band 8+5 Rx Common Output W-CDMA Band 7 Tx W-CDMA/LTE Band 7 Rx HIGH FREQUENCY PRODUCTS LTE Band 12 Tx LTE Band 12 Rx LTE Band 13 Tx LTE Band 13 Rx LTE Band 17 Tx LTE Band 17 Rx LTE Band 185 (BC0) Tx LTE Band 20 Tx LTE Band 20 Rx LTE Band 21 Rx LTE Band 25 Tx TD LTE Bnad 38 Rx TD LTE Band 3840 Common output TD LTE Band 40 Rx Part number Insertion Loss dB 1.6 1.8 1.9 1.9 1.8 1.7 1.9/3.0 3.2/2.3 1.6/1.5 AttenuationdB Remarks 38 38 39 48 64 55 48/41 53/54 42/64 Low loss, High Att. Low loss, High Att. High Att. 100ohm, High Att. 100ohm, High Att. 2 (1.9G)100ohm out 1 (2G)100ohm out 1 (2G) 200ohm out 5 (850) 200ohm out 100ohm. High Att. 100ohm. High Att. Unbal. 100ohm output 100ohm output 100ohm output 100ohm output Unbal. 100ohm output 100ohm output Low loss Unbal. 150ohm output Other System Part number ISM900 (B.W.26MHz) TD-SCDMA/TD-LTE Band 34 TD-SCDMA/TD-LTE Band 39 FAR-F5QA-915M00-M2AK FAR-F6KA-2G0175-D4DR FAR-F6KA-1G9000-D4DS G6QJ2G017M2MD G6QJ2G017M2RD TD-SCDMA Band 34+39 TD-SCDMA Band 3934 (Common input) TD-SCDMA Band 3439 (Common input) Wireless LAN Package Size mm 1.1x0.9x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.5x1.1x0.5 1.5x1.1x0.5 Insertion Loss dB 1.8 1.8 1.6 1.3/1.4 1.6/2.0 - - - - - High Att 2 IN/2 OUT 1 IN/2 OUT G6QD2G017N2DU 1.5x1.1x0.5 1.7/2.0 - Balanced 100ohm G6QD2G017N2DC 1.5x1.1x0.5 2.2/1.8 - Balanced 200ohm FAR-F6KA-2G4418-D4CU FAR-F6KA-2G4418-A4VA FAR-F6KA-2G4500-A4VD F6KA2G436A4VE F6KA2G466A4VJ 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 1.4x1.0x0.5 2.6 3.0 1.9 2.5 2.8 - - - - - 10dBm 23dBm Low IL,19dBm BW=72MHz,24dBm BW=68MHz,24dBm This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . 136 14 SAW/FBAR DEVICES (FILTER / DUPLEXERS) PACKAGING Minimum Quantity Type Duplexer Single Filter Dual Filter Sizemm 3.0x2.5 2.5x2.0 2.0x1.6 2.0x1.6 1.4x1.0 1.1x0.9 2.0x1.6 1.8x1.4 1.5x1.1 Z Z Z Z Z 3000 3000 3000 3000 3000 Z Z 3000 3000 Code & QuantityPieces U U J 5000 J 5000 10000 10000 Y Y Y Y Y Y Y 15000 15000 15000 15000 15000 15000 15000 Tape material Taping dimensions Type Duplexer Single Filter Dual Filter Sizemm 3.0x2.5 2.5x2.0 2.0x1.6 2.0x1.6 1.4x1.0 1.1x0.9 2.0x1.6 1.8x1.4 1.5x1.1 a 3.40.1 2.80.1 2.40.1 2.40.1 1.70.1 1.30.1 2.40.1 2.20.1 1.80.1 b 2.850.1 2.30.1 2.00.1 2.00.1 1.30.1 1.10.1 2.0 1.8 1.4 c 1.050.05 1.5+0.1/0 1.050.05 1.050.05 0.50.05 0.50.05 1.050.05 0.50.05 0.50.05 d 1.550.05 1.5+0.1/0 1.5+0.1/0 1.5+0.1/0 1.5+0.1/0 1.550.05 1.5+0.1/0 1.550.05 1.5+0.1/0 e 1.00.1 1.0+0.1/0.0 0.900.05 0.900.05 0.630.05 0.630.05 0.900.05 0.80.1 0.70.1 f 0.250.05 0.250.05 0.250.05 0.250.05 0.200.05 0.200.05 0.250.05 0.300.05 0.250.05 Unitmm Material of TapeConductive Tape : Polystyrene Top cover tape : Polyethylene terephthalatePETand Polyethylene Top Tape Strength The top tape requires a peel-off force of 0.1 to 1.0N in the direction of the arrow as illustrated below. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_pack_e-E02R01 Reel size Material of Reel Material : PolystyreneCarbon Characteristics : Conform to EIAJ-ET-7200A Color : Black Surface resistancereference value :109/sq Max. Code Quantity A Z 3,000 pcs 180.0 +0.0/1.5 J 5,000 pcs 180.0 +0.0/1.5 U 10,000 pcs 330.0 2.0 Y 15,000 pcs 330.0 2.0 B 66.0 0.5 66.0 0.5 100.0 1.0 100.0 1.0 C 13.0 0.2 13.0 0.2 13.0 0.2 13.0 0.2 W1 9.0 +1.0/0.0 9.0 +1.0/0.0 9.4 1.0 9.4 1.0 W2 11.4 1.0 11.4 1.0 13.4 1.0 13.4 1.0 Unitmm Reel label and Reel C-Label sticking and Winding method Surface This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_pack_e-E02R01 Filter RELIABILITY DATA 1. Terminal stregth Specified Value No damage to be found. Bending Test. according to IEC60068-2-21(JISC60068-2-21) Test Methods and Remarks 2. Mechanical shock Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Apply 14700m/s2 for 0.5ms 5 times for each of 6 directions. according to IEC68-2-27(JISC60068-2-27). 3. Vibration Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks With 1.5 mm of whole amplitude at 10 to 55 Hz of frequency, and 98m/s2 of acceleration at 55 to 500Hz, apply a vibration for 2 hours for each of 3 directions, period is 15 minutes(10 to 500 to 10Hz) 4. Drop 1 Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Drop 3 times onto concrete floor from the height of 1.0m. 5. Drop 2 Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Drop with 150g weight 3 times in each 6 direction onto concrete floor from the height of 1.8m. 6. Temperature cycling Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Temp. range 40 to 100. 500cycle. . Static humidity Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 85, 90% to 95%RH, apply DC5V, 1000hours. 8. High temperature storage life Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 100, 1000hours. 9. Low temperature storage life Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 40, 1000hours. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_reli_e-E02R01 10. Solderbility 1 Specified Value More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Test Methods and Remarks Lead-free Solder paste, ReflowPeak temperature 245 11. Solderbility 2 Specified Value More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Test Methods and Remarks Sn-Pb Solder paste, ReflowPeak temperature 235 12. Solder heat resistance Specified Value After testing, meet the specified characteristics at a room temperature. A change of the remarkable appearance do not have it. Recommended temperature profile of reflow soldering Figure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu. Suitable condition for solder heating is differed depending on composition and manufacturing method. Please contact to solder manufacturer for the details. Test Methods and Remarks This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_reli_e-E02R01 Duplexer RELIABILITY DATA 1. Terminal stregth Specified Value No damage to be found. Bend width 4mm, hold for 51 sec. according to IEC60068-2-21(JISC60068-2-21) Test Methods and Remarks 2. Mechanical shock Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Apply 14700m/s2 for 0.5ms 5 times for each of 6 directions. according to IEC68-2-27(JISC60068-2-27). 3. Vibration Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks With 1.5 mm of whole amplitude at 10 to 55 Hz of frequency, and 98m/s2 of acceleration at 55 to 500Hz, apply a vibration for 2 hours for each of 3 directions, period is 15 minutes(10 to 500 to 10Hz) 4. Drop 1 Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Drop 3 times onto concrete floor from the height of 1.0m. 5. Drop 2 Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Drop with 150g weight 3 times in each 6 direction onto concrete floor from the height of 1.8m. 6. Temperature cycling Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks Temp. range 40 to 100. 500cycle. . Static humidity Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 85, 90% to 95%RH, apply DC5V, 1000hours. 8. High temperature storage life Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 100, 1000hours. 9. Low temperature storage life Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 40, 1000hours. This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_reli_e-E02R01 10. High Temperature Bias Specified Value After testing, meet the specified characteristics at a room temperature. Test Methods and Remarks 50, 29dBm, 50000hours. 11. Solderbility 1 Specified Value More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Test Methods and Remarks Lead-free Solder paste, ReflowPeak temperature 245 12. Solderbility 2 Specified Value More than 90% of area of terminals to be covered with the solder. A change of the remarkable appearance do not have it. Test Methods and Remarks Sn-Pb Solder paste, ReflowPeak temperature 235 13. Solder heat resistance Specified Value After testing, meet the specified characteristics at a room temperature. A change of the remarkable appearance do not have it. Recommended temperature profile of reflow soldering Figure shows recommended temperature profile of reflow soldering in the case of lead-free solder alloy Sn3.0Ag0.5Cu. Suitable condition for solder heating is differed depending on composition and manufacturing method. Please contact to solder manufacturer for the details. Test Methods and Remarks This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) . sawfilter_reli_e-E02R01