0° 30°30°
60°60°
90°90°
120°120°
①
②
③
④Diagram 1. Sound Direction
Selectable playback sound
Stackable audible alarm
· Can be used with LU7-02(FB), LU7-M2(FB),
and LU7-02S(B).
· Easily mounted at the top of the light stack.
· The jumper position
determines the sound
· Volume adjustable from 9dB to 80dB at 1m (depends on type
of sound or message)
· High quality MP3 supported voice and sound module replays
up to 4 alarms or messages with 32 seconds of total program
time
· Playback sound selected by the position of internal jumper pin
· MP3 data is recorded before shipment of order
· CE compliant
Head cover is supplied with the base unit.
Omni-directional MP3 Smart Alert Module (LU7-V1)
・Loud sound pressure up to 100dB (±5dB)
・Four kinds of alarm sounds can be selected with a DIP switch for a wider
alarm sound range
・IP40 Protection rating
・Complies with CE/RoHS/FCC Standards
・Can be used with LU7-02(FB), LU7-M2(FB), and LU7-02SB
・Alarm can be set to sound with a specific LED module for simultaneous
control
4Alarm sound Patterns
With the internal DIP Switch
Loud, multi-sound Module (LU7-LB)
Type
LU7-LB
Model Rated Voltage Power Consumption Mass
LU7-V1 MP3 Smart Alert 170g24V DC 3.5W
Alarm Sound 140g 24V DC -
Rated Current Consumption
-
150mA
ø70
100.5
(mm)
LU7-V1
3900Hz
2700Hz 2500Hz
3300Hz
3300Hz
2300Hz
2000Hz
MP3
・Power over USB - no power supply needed
・DLL Operable
・Supports a maximum of five tiers where three tiers can be lighted
simultaneously
・Complies with CE/RoHS/FCC/KC Standards
・IP65 Protection rating
・Adjustable Alarm Frequency
・2 levels of adjustable alarm sound
・Sound pressure is a maximum of 80dB
・Control Program downloadable
from PATLITE website
・Four kind of flashing patterns
・13 variations of alarm frequency and 5 patterns of alarm sound
・Strip to secure USB cable included
・Supported OS: Windows 7, Windows 8
USB po wered Base Unit with Integrated Alarms (LU7-02S-USB)
USB Base Module
Omni-directional Sound Module
Maximum Product Installation Board Thickness : 10
φ70
62.5 L15
USB connector (Type B)
[Bottom View]
LED unit (Optional)
LU7-E-□
LED unit Qty
L
0 77.5
1 118.5
2 159.5
3 200.5
4
5241.5
282.5
[mm]
LU7 Series 70mm diameter
Modular LED Signal Tower
PATLITE’s LU5 & LU7 Series
signal towers deliver the
advantages of superior LED
technology, innovative design,
and the convenience of
modular assembly with only 9
basic modular components to
meet just about every
indicating need.
Makes it easy to configure
and assemble a light tower.
Modules can be put away
before shipping the machine,
reducing shipping and crate
costs.
Modular Design
Seal out liquids so that the tower
achieves an IP65 rating allowing the
tower to be used in wet conditions.
O-rings
The O-rings seal the tower from liquids
so that an IP65 rating can be achieved
to allow the tower to be used in wet
environments. Adding a Cable Gland
(user supplied) the tower's IP rating is
increased to IP66.
IP65 & IP66 with Optional Cable Gland
Modular Construction
IP65 Protection
Allows the light emitted from
the signal tower to be seen
from greater distances. This
also allows for use of a
smaller diameter light,
reducing the cost of the light
tower.
Ultra Bright LEDs combined with an
Innovative Prism Lens Design
Makes wiring easy and more reliable compared to
screw-type connections. Each color corresponds to the
color of the LED module to be used.
Color-coordinated &
Spring-loaded Terminal Block
Allows sound to enhance the critical nature of a visual
signal, bringing more attention to certain conditions. Also,
since the modules are built into the base, up to 5 LED
modules can be used on the light tower.
Two user-selectable Alarms Integrated
in the Base Module
Alarm can be easily heard over ambient noise .
Delivers Sounds up to 90dB at 1 m.
2 Tones to select
ADJUST ABLE V OLUME
2 Tones to select
NEW
NEW
Ultra bright LED
Wiring Terminals