STV8102 128 x 64 OLED passive matrix controller/driver Data Brief Features Description Supports 128 x 64 dot matrix panels Embedded DC/DC step-up converter Display power supply up to 20V Device power supply: 1.8 to 3.6V The STV8102 is a low-power, controller/driver "combo" IC for Organic Light Emitting Diode (OLED) dot passive matrix display systems.The STV8102 supports black-an-white, monochrome displays of up to 128 columns by 64 rows. Low-power consumption suitable for batteryoperated systems Column source current: 508A, max Row sink current: 64mA On-chip oscillator Programmable multiplexing rate Self adaptive panel addressing scheme PowerMizerTM driving scheme Brightness control with built-in aging compensation Built-in display pattern generator Selectable 8-bit parallel interface (68xx, 80xx series), serial peripheral interface and IC interface Embedded 128 x 64 x 1-bit display RAM Row and column re-mapping Screen saver mode January 2007 The STV8102 provides all necessary functions in a single chip, including on-chip OLED supply control and bias current generators resulting in a minimum of external components and in very lowpower consumption. The STV8102 communicates with the system via fully configurable interfaces (parallel, serial or I2C) to ease interfacing with the host microcontroller. The STV8102 has a set of control and status registers that can be addressed by the interfaces. Rev 1 For further information contact your local STMicroelectronics sales office. 1/3 www.st.com 3 STV8102 Table 1. Key features and benefits Features Benefits PowerMizerTM automatic adjustment of VPP Reduce power consumption Embedded DC/DC converter on chip oscillator Reduce system components Self adaptive scanning Reduce power consomption Figure 1. Functional block diagram I2 C interface Parallel interface SPI interface Status register Instruction decoder Control register Row drivers Clock generators Display RAM 64 x 128 bits Screen saver Self-adaptive scanning control Pattern generator Column drivers PowermizerTM panel supply Current reference Ordering information Table 2. Order codes Part number Temp range, C Package Packing STV8102C/ST-A -25 to +125 COF 35SW, 5 SH tape-and-reel STV8102/WPB3 -25 to +125 bumped die waffle pack Revision history Table 3. 2/3 Document revision history Date Revision 15-Jan-2007 1 Changes Initial release. STV8102 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 3/3