Features
●Plastic package has underwriters Laboratory
Flammability Classification 94V-0
●Dual rectifier construction, positive center tap
●Low forward voltage, high efficiency
●Guarding for over voltage protection
●For use in low voltage，high frequency inverters
●Free wheeling and polarity protection applications
Mechanical Characteristics
●Case：Epoxy，Molded
●Weight: 1.9 grams (approximately)
●Finish：All external surfaces corrosion resistant and terminal leads are readily solderable
●Lead temperature for soldering purposes：260°C Max. for 10 sec
●Shipped 50 units per plastic tube
Maximum Ratings and Electrical Characteristics (TC=25°C unless otherwise noted
PARAMETER TEST CONDITIONS SYMBOL MBRF20200CT UNIT
Maximum repetitive peak reverse voltage VRRM 200 V
Working peak reverse voltage VRWM 200 V
Maximum DC blocking voltage VDC 200 V
IF(AV) 20 A
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load per diode
IFSM 150 A
Peak repetitive reverse current per leg at tp=2.0us ，1KHz IRRM 1.0 A
Voltage rate of change（rated VR） DV/dt 10000 V/us
Operating junction temperature range TJ -55 to+150 °C
Storage temperature range TSTG -55 to+150 °C
Isolation voltage (TO220F-AB only) from terminal to
heatsink t = 1 sec VAC 1500 V
Maximum instantaneous forward voltage per leg
IF=10A
IF=10A
TC=25℃
TC=125℃
VF 0.94
0.85 V
Maximum reverse current per leg at working peak
Reverse voltage TJ=25℃
TJ=100°C IR 400
15
uA
mA
Thermal Characteristics Ta=25 unless otherwise noted℃
Symbol Parameter Max Unit
RθJC Thermal Resistance，Junction to Case per Leg 4.0 °C /W
RθJA Thermal Resistance，Junction to Ambient per Leg 62.5 °C /W
Note：
1. Screw mounting with 4-40 screw，where washer diameteris≤4.9mm(0.19〃)
2. Pulse test:300us pulse width,1% duty cycle
MBRF20200CT
Schottky Barrier Rectifier
CASE:TO-220F-AB
1/4
10
Maximum average forward rectified current at Tc=105°C
total Device
per Diode
Rating and Characteristic Curves
(Tc=25℃ Unless otherwise noted)
MBRF20200CT
Schottky Barrier Rectifier
2/4
Package Outline (TO-220F-AB) UNIT:MM
Lead Frame Material : Copper Plating: Pure Tin Plating
MBRF20200CT
Schottky Barrier Rectifier
3/4
MARKING
1. Part Name : MBRF20200CT
2. Logo Mark:
3. Polarity：
MBRF20200CT
MBRF20200CT
Schottky Barrier Rectifier
www.goodarksemi.com
4/4
Doc.USMBRF20200CTx1
