D-20420-0 - CINCH - Datasheet.Live

4-96

Call Toll Free: 1 (800) 323-9612

Dust Caps

• For use with all Cinch D-subminiature connectors.

• Used to protect connector contacts when connector is not mated.

• Made of polyethylene (black).

Guide Pin Plates

•Aligns connectors before actual mating. Generally used in blind mate applications.

• Male or female guide plates will accommodate Cinch male or female connectors.

• Plate: Cold-rolled steel with cadmium plating and yellow chromate finish.

• Guide pin (male): Stainless steel, passivated.

• Screws, r ivets (male plate), washers (male plate): Steel with cadmium plating and yellow chromate finish.

Ordering Information

Fits

Shell Standard A B C D F G K

Size Density Plug Socket in mm in mm in mm in mm in mm in mm in mm

E 9 N/A N/A

A 15 DA-22213 DA-22214 2.281 57.93 1.000 25.40 1.312 33.32 .750 19.05 .898 22.81 1.663 42.24 1.906 48.41

B 25 DB-22255 DB-22254 2.820 71.63 1.000 25.40 1.852 47.04 .750 19.05 1.168 29.67 2.203 55.96 2.446 62.13

C 37 DC-22070 DC-22071 3.468 88.09 1.000 25.40 2.500 63.50 .750 19.05 1.492 37.90 2.851 72.42 3.094 78.59

D 50 DD-21962 DD-21961 3.375 85.73 1.125 28.58 2.406 61.112 .874 21.88 1.437 36.50 2.749 69.82 3.000 76.20

D-subminiature

Accessories

Ordering Information

Fits Fits

Shell Standard A B C D

Size Density Catalog No. Description in mm in mm in mm in mm

E 9 DE-59-20 Socket .694 17.63 .627 15.93 .362 9.19 .295 7.49

E 9 DE-60-20 Plug .749 19.02 .682 17.32 .412 10.46 .345 8.76

A 15 DA-59-20 Socket 1.022 25.95 .955 24.25 .362 9.19 .295 7.49

A 15 DA-60-20 Plug 1.077 27.36 1.010 25.65 .412 10.46 .345 8.76

B 25 DB-59-20 Socket 1.562 39.67 1.495 37.97 .362 9.19 .295 7.49

B 25 DB-60-20 Plug 1.635 41.52 1.568 39.83 .430 10.92 .363 9.22

C 37 DC-59-20 Socket 2.210 56.13 2.143 54.43 .362 9.19 .295 7.49

C 37 DC-60-20 Plug 2.283 57.99 2.216 56.29 .430 10.92 .363 9.22

D 50 DD-59-20 Socket 2.116 53.75 2.049 52.04 .474 12.04 .407 10.34

D 50 DD-60-20 Plug 2.179 55.35 2.112 53.64 .536 13.61 .469 11.91

Plug Socket

4-97

Call Toll Free: 1 (800) 323-9612

Slide Lock Assemblies

•A slide lock assembly is a metal bracket offered with hardware necessary to mount into the standard connector

mounting holes. It consists of the lock retainer plate, two screws, two washers, and two nuts. Two lock posts are

required to fit into the mounting holes of the mating connector. These must be ordered separately.

• Compatible with all Cinch Backshells, Hoods, and Junction Shells

except

D*H Series, SDH Series, and phenolic hood.

• Compatible with all Cinch metal shell D-subminiature connectors.

Materials

•Slide Lock Plate: Stainless steel, passivated.

• Slide lock hex nut, washer #4-40 screw: Steel with zinc plating and yellow chromate finish.

• Lockpost, washer, lockwasher, and hex nut: Steel with zinc plating and yellow chromate finish.

D-subminiature

Accessories

Consists of Lock Retainer and two lock posts (order separately).

NOTE: Not compatible with D*H Series or SDH Series backshells.

Ordering Information

Fits

Shell Standard Lock A B C

Size Density Retainer in mm in mm in mm

E 9 DE-51224-1 1.442 36.63 .500 12.70 0.984 24.99

A 15 DA-51220-1 1.770 44.96 .500 12.70 1.312 33.27

B 25 DB-51221-1 2.293 58.24 .500 12.70 1.852 47.04

C 37 DC-51222-1 2.958 75.13 .500 12.70 2.500 63.50

D 50 DD-51223-1 2.847 72.31 .609 15.47 2.406 62.48

Lock Post: #D53018. Two (2) required with each Slide Lock Assembly.

.145

4-98

Call Toll Free: 1 (800) 323-9612

D-subminiature Hardware

Accessories

Screwlocks

•Screwlocks are designed to retain the same size mated connectors together or to secure the connector to a rack/panel.

Screwlocks may be used on plugs or sockets.

• Female screwlocks consist of one #4-40 screw with a #4-40 hole in the top, two flat washers to accommodate different panel

thicknesses, one lockwasher, and one #4-40 nut. Militar y female screwlocks include three flat washers.

• Male screwlocks consist of one #4-40 slotted screw and a spring tension clip. Different sizes accommodate the various

connector flange sizes and types of backshells or hoods (if applicable).

• Two screwlocks are required per connector.

• Militar y screwlocks meet all requirements of MIL-C-24308.

Materials

Commercial Screwlock Assemblies:

• Male Screwlock Assembly: Clip and screw are steel with zinc plating and yellow chromate finish.

• Female Screwlock Assembly: Washers (2), lockwashers, hex nuts, and nuts are steel with zinc plating

and yellow chromate finish.

M24308 Militar y Screwlock Assemblies:

• Male Screwlock Assembly: Clip and screw are steel with cadmium plating and yellow chromate finish.

• Female Screwlock Assembly: Washers (3), lockwashers, hex nuts, and nuts are steel with cadmium plating and

yellow chromate finish.

Female Screwlock Male Screwlock

4-99

Call Toll Free: 1 (800) 323-9612

D-subminiature

Accessories

• Screwlock assemblies will not fit D*H or SDH Series backshells.

Male Screwlocks

Ordering Information

Shell Size E A B C D

Positions 9 15 25 37 50

in mm in mm

Commercial:

D20419-0 0.250 56.35 0.033 0.84 P/S P/S S S

D20419-16 0.250 56.35 0.048 1.22 S* S* P/S* P/S*

D20419-21 0.281 63.34 0.059 1.50 P* P*

D20420-0 0.250 56.35 0.033 0.84 S

D20420-12 0.281 63.34 0.048 1.22 P/S*

D20420-15 0.281 63.34 0.059 1.50 P*

Military MIL-C-24308:

M24308/25-9F Per MIL spec P/S P/S P/S P/S

M24308/25-10F Per MIL spec P/S

NOTE: P = Plug, S= Socket

* Indicates use with junction shell

Female Screwlocks

Ordering Information

Shell Size E A B C D

Positions 9 15 25 37 50

in mm

Commercial:

D20418-2 0.312 70.32 P/S P/S P/S P/S P/S

D20418-39 0.628 141.55 P/S P/S P/S P/S P/S

Military MIL-C-24308:

M24308/26-1F Per MIL spec P/S P/S P/S P/S P/S

M24308/26-2F Per MIL spec P/S P/S P/S P/S P/S

NOTE: P = Plug, S= Socket